-10%

UT363 – Mini Anemometer

Availability:

29 in stock


UT363 anemometer is a mini wind speed and wind temperature tester. This light weight device is equipped with the latest magnetic sensing technology which can directly display the air flow speed on the LCD display. It is a perfect tool for sport events, wind measurement, navigation, HVAC, and other areas.

4,320 4,800

29 in stock

Compare

UT363 anemometer is a mini wind speed and wind temperature tester. This light weight device is equipped with the latest magnetic sensing technology which can directly display the air flow speed on the LCD display. It is a perfect tool for sport events, wind measurement, navigation, HVAC, and other areas.

Category:
Weight 0.1 kg
Dimensions 16 × 5 × 3 cm
Functions Range Resolution Accuracy
Wind Speed 0~30m/s 0.1m/s ±5%rdg+0.5
Temperature -10~50℃ 0.1℃ ±2℃
14~122℉ 0.2℉ ±4℉
Wind Scale Level 0~12 1 ±1
Sampling Rate 0.5s
Overload Indication >45m/s OL
MAX/AVG MAX/AVG
Data Hold HOLD
LCD Backlight Yes
Auto Power Off 5min
Low Battery Indication 3.0~3.5V
Battery 4.5V
Current Consumption Working mA ≤25mA
Power off uA ≤10uA
Work Environment Temperature 0~40℃
Humidity ≤80%RH
Storage Environment Temperature -20~60℃
Humidity ≤75%RH
Key Functions
ON/OFF Short press to turn on/off the meter
MAX/AVG Short press to switch between MAX/MIN/QUIT
UNIT Short press switch between m/s, ft/m, mph, Km/h, Knots,℃,℉.
HOLD/BL Short press to turn on/off backlight

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT363 – Mini Anemometer”

There are no reviews yet.

  • LKZ-720 Wires and pipe locator

    0 out of 5
    (0)

    Features:

    • the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
    • phase detection mode,
    • receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
    • a LED bright torch,
    • headphone socket in receiver,
    • screens backlight for work in dark,
    • transmission battery status and settings of the transmitter to the receiver
    • operation in wide range of rated voltage, up to 500V RMS,
    •  measurement of voltage at the object to 500 Vrms,
    • three levels of transmitter amplification,
    • automatic or manual selection of transmitter operation modes,
    • five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
    • software upgrade via USB,
    • additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
    SKU: n/a
  • UT725 Multifunction Process Calibrator

    0 out of 5
    (0)

    Features of UT725 Multifunction Process Calibrator

    Certifications: CE, UKCA

    ● Step/ramp functions

    ● Source and measure accuracy up to 0.02%
    ● Rechargeable battery
    ● Contrast adjustment
    ● Auto power off (Time adjustable)
    ● Stores and recalls setups
    ● USB communication
    ● Simultaneously measure and output different process signal in real time
    ● Pressure measure with specified pressure modules, and sourcing pressure
    ● Provides 24V loop power to transmitter while conducting mA current measurement at the same time
    SKU: n/a
  • A25F PM2.5 Meter

    0 out of 5
    (0)

    1. Precise PM2.5 concentration based on pre-calibrated sensors

    2. Temperature measurement (°C/°F)
    3. Humidity measurement
    4. Emoticon display
    5. LCD backlight and red backlight alarm
    6. Battery status, low power, auto power off
    7. Formaldehyde concentration
    SKU: n/a
  • UT361 Anemoscopes

    0 out of 5
    (0)

    UT360 series anemograph is a professional anemograph used to measure wind temperature, wind speed and wind capacity, which is of stable performance, reliable and of neoteric appearance. The device can be widely used in the fields such as environmental protection, labor hygiene, industrial enterprise, scientific research. It is applied to environmental noise measurement, machinery equipment noise and architectural acoustics measurement.

    SKU: n/a