19 in stock
1. 1000V DC voltage measurement
₨4,920 ₨5,014
19 in stock
Compare
| Weight | 0.4 kg |
|---|---|
| Dimensions | 17 × 8 × 5 cm |
| Specifications | Range | UT39C+ |
| DC voltage (V) | 400mV/4V/40V/400V/1000V | ±(0.5%+5) |
| AC voltage (V) | 4V/40V/400V/750V | ±(0.8%+3) |
| DC current (A) | 400uA/400mA/10A | ±(0.8%+3) |
| AC current (A) | 4mA/400mA/10A | ±(1%+2) |
| Resistance (Ω) | 400Ω/4000Ω/40kΩ/400kΩ/4MΩ/40MΩ | ±(0.8%+2) |
| Capacitance (F) | 4nF/40nf/400nF/4uF/40uF/400uF/4mF/10mF | ±(4%+5) |
| Frequency (Hz) | 10Hz~1MHz | ±(1%+4) |
| Temperature | -40℃~1000℃ | ±(1%+4) |
| -40℉~1832℉ | ±(1.5%+5) | |
| Features | ||
| Display count | 4000 | |
| Transistor hFE | √ | |
| NCV | √ | |
| Diode | √ | |
| Frequency response | 40Hz~400Hz | √ |
| Range selection | Manual | |
| Continuity test | √ | |
| Data hold | √ | |
| Backlight | √ | |
| Low battery indication | √ | |
| Auto power off | √ | |
| General Characteristics | ||
| Power | 1.5V battery (R03)×2 | |
| Display | 56.5mm x 36mm | |
| Product color | Red and grey | |
| Product net weight | 330g | |
| Product size | 175mm x 83mm x 53mm | |
| Standard accessories | Test leads, temperature probe | |
| . | ||
Operating Conditions
Supply power: AC 220-240V, 50Hz/60Hz.
Working Temperature: -10°C ~ 40 °C
Relative Humidity: ‹ 90%
Storage Conditions: -10°C ~ 40 °C
Relative Humidity: ‹ 80%
Stable Voltage
The output voltage is between 0 and nominal value continuously adjustable
Voltage Stability: ≤0.01% +2mV
Load Stability: ≤ 0.01% +2mV
Recovery Time: ≤100µS
Temperature Coefficient: ≤ 200PPM/°C
Ripple Noise: ≤1 MVRMS(RMS)
Stable Current
Power Stability: 0.1% + 3mA
Load Stability: 0.2% + 3mA
Ripple Noise : ≤2mArms(RMS)
The output current is between 0 and nominal value continuously adjustable
1. Dual analog channels width range 1mV/div~20V/div;
2. 7 inches widescreen LCD displays;
3. Special Print Scree Feature;
4. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device;
5. USB drive system software upgrade;
6. Storage of waveforms setups and interfaces waveforms and setups reproduction;
7. Automatic measurement of 28 waveform parameters;
8. Unique waveform recording and replay function;
9. Multilingual menu displays.
Features of UT658 Series USB Testers
Certifications: CE, UKCA
● Type-A/C interface
● CE certification
● 10 sets of data storage
● Loop equivalent resistance measurement (1-480Ω)
● Same screen shows voltage, current, power, capacity, etc.
● Support fast charge protocol
| Analog bandwidth | 150MHz | 250MHz | ||
| Channels | 2+16 digital | 4+16 digital | 2+16 digital | 4+ 16digital |
| Sampling rate (Analog) | 2.5GS/s (Single channel), 1.25GS/s (Dual channels) | |||
| Sampling rate (Digital) | 1.25GS/s (Eight channels), 625MS/s(Sixteen channels) | |||
| Memory depth | 70Mpts | |||
| Waveform capture rate | 200,000wfms/s | |||
| Time base scale | 2ns/div~50s/div (Real-time sampling rate, memory depth display ) | |||
| Time base scale (digital) | 2ns/div~40S/div[Step by 1-2-4 stall] | |||
| Input impedance | (1MΩ±1%) II (20pF±3pF) | |||
| Input impedance digital | (101kΩ±1%) II (9pF±1pF) | |||
| Vertical scale | 1mV/div~20 V/div (1 MΩ) | |||
| DC gain accuracy | <5mV: ±3%, ≥5mV: ±2% | |||
| Waveform record | 100,000 frames | |||
| Trigger types | Edge, Runt, Window, Nth Edge, Delay, Overtime, Duration, Setup/Hold, Pulse Width, Slop, Video, Code; RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay |
|||
| Bus decode | RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay | |||
| Waveform operations | A+B, A-B, A×B, A/B, FFT, editable advanced and logical operations | |||
|
Auto measurements |
Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, CycRMS, Period, Freq, Rise, Fall, RiseDelay, FallDelay, +Width, -Width, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 parameters in totaldigital channel: Freq, Period, +Width, -Width, +Duty, -Duty, RiseDelay A→B,FallDelay A→B, Phase A→B, Phase B→A |
|||
| Measurement display | 5 types | |||
| Measurement statistics | Average, Max, Min, standard deviation and number of measurements | |||
| Frequency counter | 6 bits | |||
| Standard interfaces | USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), AWG,UT-M15 logic analyzer probe, VGA | |||
|
Standard Accessories |
USB interface cable | UT-D14 | ||
| Passive Probe x 2/4 (1 x , 10 x switchable,300MHz,) | UT-P06 | |||
| Passive Probe x 2/4 (1 x , 10 x switchable,200MHz,) | UT-P05 | |||
| 16CH Logic analyzer probe | UT-15M | |||
LR series laser rangefinders are portable long distance measurement tools. They are portable and ergonomically designed with high accuracy for a wide range of applications from leisure to professional including hunting, sailing, large scale hauling, large area surveying, and more. Its built-in rechargeable Lithium battery ensures long operation runtime. The 7x optical zoom design can measure distance, angle, and calculate Pythagorean relationships.
UT61 Series Digital Multimeters are products designed for multi-functional, high precision, high performance and automatic measurements.
UT132 Series is a 3.5 digit palm sized digital multimeter with stable performance, and fashionable design. UT132 are safe and reliable manual ranged multimeters that can be used for measuring AC/DC voltage, resistance, capacitance, temperature, diode voltage drop, transistor hFE parameter, circuit continuity, square wave output and so on. Its adapter plug socket can conveniently test surface mount devices. UT132 can be used for home, schools, factories, electrical and chemical engineering, and other areas. It is a great tool for circuit maintenance and electrical equipment repair.
YH SUCTION GUN FOR 948D 
YH 9071 IRON FOR 862BD+,995D+,939BD+ 
UT620A Digital Micro Ohm Meter 
There are no reviews yet.