UT622A Digital Inductance LCR Meter


Specifications UT622A UT622C UT622E
Certificates CE, RoHS
Test frequency 100Hz, 120Hz, 1kHz, 10kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz
Test signal level  0.1Vrms, 0.3Vrms, 1Vrms
Output impedance 100Ω
Measurement parameters Primary: L/C/R/Z
Secondary: D/Q/θ/ESR
Primary: L/C/R/Z/DCR  Secondary: D/Q/θ/ESR
Auto LCR
Test terminals Three-terminal test jacks, five-terminal test sockets
Test rate Fast (20 times/s), medium (5 times/s), or slow (2 times/s)
DCR test rate Fast (20 times/s), medium (5 times/s), or slow (2 times/s)
Ranging mode Auto/hold
Tolerance range 1%~20%
Testing circuit mode Series/parallel mode
Clearing correction Open/short circuit
Fuse of test ports 0.1A/250V
Communication interface Mini-USB
LED alarm for tolerance
(pass: green; fail: red)
Display range
Maximum reading 99999
Minimum resolution 0.0001
Maximum accuracy 0.001
L 0.00μH~99.999H
C 0.00pF~99.999mF
Z/R 0.0000Ω~9.9999MΩ
ESR 0.0000Ω~999.99Ω
D 0.0000~9.9999
Q 0.0000~99999
θ -179.9°~179.9°
DCR 0.01mΩ–20.000MΩ
Temperature coefficient 0.1× (specified accuracy) /°C (0°C~18°C or 28°C~40°C)
General Characteristics
Power 3.7V 1800mAh lithium polymer battery; Input: 220V (1±10%), 50Hz (1±5%); Mini-USB output: 5V, 1A
Display 2.8′ TFT LCD 320X240
Product net weight 420g
Product size 93mm x 192mm x 44mm
Standard accessories Short circuit board (UTR-001), USB cable, 5V 1A power adapter, Four-terminal Kelvin testleads (UTR-L100k-H) (UT622C/E), Alligator clip test leads with rubber plugs (UTR-002)(UT622A), English manual

57,410

Compare

UT622A Digital Inductance LCR Meter

Precision LCR Meter – Up to 0.1% high accuracy measurements, the unit mainly measures inductance (L), capacitance (C), resistance (R) of components, also measures impedance (Z), dissipation factor (D), quality factor (Q), angle phase (θ), and ESR.
Accurate Measurement – Selectable 4 test frequencies of 100Hz, 120Hz, 1kHz, and 10kHz. Selectable 3 test levels of 0.1V, 0.3V, and 1V. Selectable tolerance of 1%, 5%, 10%, and 20%. Able to select parallel or series increasing accuracy of in-circuit testing. Auto-off in 5min, 15min(default), 30min, or 60min are selectable.
3 Measurement Speeds – Slow(2 times per second), medium(5 times per seconds) and fast(20 times per second).
Tolerance Comparison – Equipped with audible/visual alarm, and counter features for tolerance fail/pass test.
Data Logger – The average, maximum, minimum value can be recorded via data logging mode.
Zeroing – Open/short zeroing eliminates connection errors, deliver more accurate measurement each times.
USB to PC – Transfer data to the PC/Laptop through a USB port, and exports to image file(jpg.), Excel and PDF report is available.
Portable – High resolution LCD with 5 digit display, lightweight, portable, and battery operated.
Applied in the product development, incoming inspections, or production line testing.

Category:

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT622A Digital Inductance LCR Meter”

There are no reviews yet.

  • CLAMP METER AC DT3266

    0 out of 5
    (0)

    DT3266L AC/DC Mini Pocket Handheld Digital Clamp Meter Voltage Current Resistance Tester Multimeter

    Features :

    • 3 1/2 digit LCD screen, the maximum display value is 1999.
    • A multi-purpose clamp meter can measure AC/DC voltage and resistance, etc.
    • Low voltage indication and overload protection.
    • Diode and continuity measurement.
    • High resolution of 1mA minimum force.
    • Small and portable to carry and use.
    • Data retention for easier reading.

    Specifications :

    1. Color : Black + Yellow
    2. Material : Plastic
    3. DC Voltage : 600V ±(0.8%+3dgt)
    4. AC Voltage : 750V ±(1.2% +5dgt)
    5. AC Current : 20A-200A-400A ±(2%+5dgt)
    6. Resistance : 2K-200K-2MΩ ±(1.0%+3dgt)
    7. Power Supply : 2 x AAA 1.5V Batteries (Not included)
    8.  Maximum Display : 1999
    9. Jaw Diameter : 30.8mm
    10. Display Size : 35 x 17mm
    11. Item Size : 17.3 x 5.2 x 2.5cm / 6.8 x 2 x 0.98in
    12. Item Weight : 120g / 4.24oz
    13. Package Size : 17.8 x 10 x 3cm / 7 x 3.94 x 1.18in (L x W x H)
    14. Package Weight : 187g / 6.59in
    15. GW:0.2KG

    Note :  

    This meter can’t measure DC current.

    Package includes :

    • 1 x Clamp Meter
    • 1 x Test Lead

    Best online shopping website for Portable Handheld Digital Clamp Meter DT3266L AC DC Multimeter Voltage Current Resistance Tester at cheap price in Lahore, Islamabad, Karachi, Faislabad, Multan, Quetta, Sukkur, Peshawar, Rawalpindi, and all over Pakistan

     

    SKU: n/a
  • A 830L DMM

    0 out of 5
    (0)
    SKU: n/a
  • RF-6555 PRO

    0 out of 5
    (0)
    SKU: n/a
  • SOLDERING IRON WOOD 300W BLUE

    0 out of 5
    (0)

    SOLDERING IRON WOOD 300W BLUE

    SKU: n/a
  • UT33B+ Palm Size Multimeter

    0 out of 5
    (0)

    Main features

    1. Clear LCD display

    2. Equipped with comfortable protective cover, test lead hanging slot

    3. 2m drop proof with precision protection

    4. Auto power off

    5. Auto backlight off

    6. Loud buzzer

    7. Ergonomically designed rotary switch

    SKU: n/a