-
×
UT337A Carbon Monoxide Meter
- Vendor:
superworld
Subtotal: ₨48,000
UT622C Digital Inductance LCR Meter
Precision LCR Meter – Up to 0.1% high accuracy measurements, the unit mainly measures inductance (L), capacitance (C), resistance (R) of components, also measures impedance (Z), dissipation factor (D), quality factor (Q), angle phase (θ), and ESR.
Accurate Measurement – Selectable 4 test frequencies of 100Hz, 120Hz, 1kHz, and 10kHz. Selectable 3 test levels of 0.1V, 0.3V, and 1V. Selectable tolerance of 1%, 5%, 10%, and 20%. Able to select parallel or series increasing accuracy of in-circuit testing. Auto-off in 5min, 15min(default), 30min, or 60min are selectable.
3 Measurement Speeds – Slow(2 times per second), medium(5 times per seconds) and fast(20 times per second).
Tolerance Comparison – Equipped with audible/visual alarm, and counter features for tolerance fail/pass test.
Data Logger – The average, maximum, minimum value can be recorded via data logging mode.
Zeroing – Open/short zeroing eliminates connection errors, deliver more accurate measurement each times.
USB to PC – Transfer data to the PC/Laptop through a USB port, and exports to image file(jpg.), Excel and PDF report is available.
Portable – High resolution LCD with 5 digit display, lightweight, portable, and battery operated.
Applied in the product development, incoming inspections, or production line testing.
Based on 0 reviews
Be the first to review “UT622C Digital Inductance LCR Meter”
-
Multimeters
UT139C True RMS Digital Multimeters
UT139 Series digital multimeters are newly designed to offer users better performance and higher safety rating. Totally over-load protection and unique structural design make it new type of multimeter with high performance/ price ratio and a best choice for electricians used in electrical maintenance and repairing.
1、True RMS for the whole series;
2、Measure signals with varied frequency (VFC);
3、Measure large capacitance up to 100mF;
4、Optional AC/DC 60A current clamps in different models to measure current up to 60A(1mv=1A);
5、NCV designed for the whole series, a necessity for electricians;
6、AA1.5V*2(5#) battery, easy for users to purchase and replace;
7、Soft rubber holster is easy to stand 2m drop;
8、Optional magnetic hanging strap offered to facilitate tests in special location;
9、Fast to replace fuse, just by opening battery cover;
10、Reliable with use of internal 2PCS fuses with high-breaking capacity;
11、Protection against 600V input/1 minute from misconnection;
12、Safety Rating: CAT III 600V.Applications
An ideal tool for equipment testing, maintenance and repair widely needed in electronics, electric power, schools, metallurgy, communications, manufacturing, petroleum, national defense, chemical industry, etc.SKU: n/a -
Related products
-
LCR Meter
UT603 Inductance Capacitance Meters
UT600 series RCL meter is a kind of 3.5-bithandheld digital meter with stable performance, safety, reliability, highaccuracy and manual range. It can be used to measure the magnification times β of audion, diode forward voltage drop and circuit continuity. UT601has wide capacitance measurement range from 0.1pF～20mF and highaccuracy. UT602 can hold data. UT 600 series is applicable to testingresistance, capacitance and inductance of electronic laboratory, productionline, maintenance point and teaching. It is the ideal tool of maintaining formany users.
SKU: n/a -
LCR Meter
UT620 Series Digital Micro Ohm Meters
UT620 series are used to measure DC low resistance through 4-wire method. Some of its features are: Comparison function to determine if the device is in good condition, unknown wire length calculation (FT/M); two-way data transmission by USB interface; built-in rechargeable lithium battery. UT620 can be used in narrow space for on-site troubleshooting, such as metal coating resistance/motor and small transformer winding resistance measurement, earth system joints/welding points/power distribution cabinet bus and lead connection inspection and more.
SKU: UN62B0TUOM -
LCR Meter
MS8910 Smart SMD Tester (R/C)
The Tester is a handheld and battery operated very convenient small Tool that is specially used to measuring SMD (Surface Mounting Device), there are Chip type resistor, Chip type capacitor, and diode. Moreover, the Tester also has the continuity checking function.
● Display 3000 counts
● Auto Ranging
● Auto Power Off
● Data Hold
● Low Battery Display
● Auto Scanning
● Diode Check Open Voltage 2.8V
● Diode Testing Current 2mA
● Continuity Buzzer <30ΩSKU: n/a
There are no reviews yet.