UT622C Digital Inductance LCR Meter

Availability:

Out of stock
Add to Wishlist
Compare

₨0

Out of stock

Compare

UT622C Digital Inductance LCR Meter

Precision LCR Meter – Up to 0.1% high accuracy measurements, the unit mainly measures inductance (L), capacitance (C), resistance (R) of components, also measures impedance (Z), dissipation factor (D), quality factor (Q), angle phase (θ), and ESR.
Accurate Measurement – Selectable 4 test frequencies of 100Hz, 120Hz, 1kHz, and 10kHz. Selectable 3 test levels of 0.1V, 0.3V, and 1V. Selectable tolerance of 1%, 5%, 10%, and 20%. Able to select parallel or series increasing accuracy of in-circuit testing. Auto-off in 5min, 15min(default), 30min, or 60min are selectable.
3 Measurement Speeds – Slow(2 times per second), medium(5 times per seconds) and fast(20 times per second).
Tolerance Comparison – Equipped with audible/visual alarm, and counter features for tolerance fail/pass test.
Data Logger – The average, maximum, minimum value can be recorded via data logging mode.
Zeroing – Open/short zeroing eliminates connection errors, deliver more accurate measurement each times.
USB to PC – Transfer data to the PC/Laptop through a USB port, and exports to image file(jpg.), Excel and PDF report is available.
Portable – High resolution LCD with 5 digit display, lightweight, portable, and battery operated.
Applied in the product development, incoming inspections, or production line testing.

 

Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT622C Digital Inductance LCR Meter”

There are no reviews yet.

  • UNI-T UT276A+ Auto Range Digital Clamp Earth Ground Tester

    UNI-T UT276A+ Auto Range Digital Clamp Earth Ground Tester

    0 out of 5
    (0)

    ● Auto range
    ● Data hold
    ● Data recall
    ● LCD backlight
    ● Resistance limit alarm
    ● Low battery indication
    ● Auto calibration

    SKU: n/a
    ₨85,000
    Add to cart
    Add to Wishlist
    Compare

  • UNI-T UTi712S Economical Handheld Infrared Thermal Imaging Camera with Buzzer Alarm Temperature Range -20ºC~400ºC

    UNI-T UTi712S Economical Handheld Infrared Thermal Imaging Camera with Buzzer Alarm Temperature Range -20ºC~400ºC

    0 out of 5
    (0)

    Product Features of UTi712S Thermal Imager

    • 2.8″ LCD screen
    • Infrared resolution: 120 x 90
    • Temperature measurement range: -20ºC~400ºC
    • Temperature Compensation
    • Photograph function with SD card storage
    • PC analysis software
    • Buzzer/Flashlight alarm
    • Auto capture of High/Low temperature
    • With Laser Indicator
    • Flashlight
    • 1/4″ tripod mounting hole
    • IP54/2m drop proof
    SKU: n/a
    ₨60,236
    Read more
    Add to Wishlist
    Compare

  • SVC 2000VA

    SVC 2000VA

    Super World
    0 out of 5
    (0)

    Input=120V 270
    Output=220
    Under and Over Volt Protection
    Surge Protection
    Over Load and Heat Protection
    Copper Wind with LCD Display

    SKU: n/a
    ₨27,058 ₨29,691
    Add to cart
    Add to Wishlist
    Compare

  • CLAMP METER AC DT3266

    CLAMP METER AC DT3266

    0 out of 5
    (0)

    DT3266L AC/DC Mini Pocket Handheld Digital Clamp Meter Voltage Current Resistance Tester Multimeter

    Features :

    • 3 1/2 digit LCD screen, the maximum display value is 1999.
    • A multi-purpose clamp meter can measure AC/DC voltage and resistance, etc.
    • Low voltage indication and overload protection.
    • Diode and continuity measurement.
    • High resolution of 1mA minimum force.
    • Small and portable to carry and use.
    • Data retention for easier reading.

    Specifications :

    1. Color : Black + Yellow
    2. Material : Plastic
    3. DC Voltage : 600V ±(0.8%+3dgt)
    4. AC Voltage : 750V ±(1.2% +5dgt)
    5. AC Current : 20A-200A-400A ±(2%+5dgt)
    6. Resistance : 2K-200K-2MΩ ±(1.0%+3dgt)
    7. Power Supply : 2 x AAA 1.5V Batteries (Not included)
    8.  Maximum Display : 1999
    9. Jaw Diameter : 30.8mm
    10. Display Size : 35 x 17mm
    11. Item Size : 17.3 x 5.2 x 2.5cm / 6.8 x 2 x 0.98in
    12. Item Weight : 120g / 4.24oz
    13. Package Size : 17.8 x 10 x 3cm / 7 x 3.94 x 1.18in (L x W x H)
    14. Package Weight : 187g / 6.59in
    15. GW:0.2KG

    Note :  

    This meter can’t measure DC current.

    Package includes :

    • 1 x Clamp Meter
    • 1 x Test Lead

    Best online shopping website for Portable Handheld Digital Clamp Meter DT3266L AC DC Multimeter Voltage Current Resistance Tester at cheap price in Lahore, Islamabad, Karachi, Faislabad, Multan, Quetta, Sukkur, Peshawar, Rawalpindi, and all over Pakistan

     

    SKU: n/a
    ₨1,150 ₨1,308
    Add to cart
    Add to Wishlist
    Compare

  • JM-8133 23 in 1 Screwdriver Ratchet Hand-tools

    JM-8133 23 in 1 Screwdriver Ratchet Hand-tools

    0 out of 5
    (0)

    Features:

    1. New 23-in-1 interchangeable precise manual tool set.
    2. Professional portable hardware tools with perfect weight and compact design for easy implementation.
    3. Comes with an accessory box for small components.
    4. More bits of cr-v are very suitable for deep holes.
    5. Non-slip hard shaft provides more comfort and convenience.
    6. For repair laptops, mobile devices.
    SKU: n/a
    ₨1,446 ₨1,974
    Read more
    Add to Wishlist
    Compare
  • ,

    YH S208B PIPE FOR YH 995D+

    ,

    YH S208B PIPE FOR YH 995D+

    0 out of 5
    (0)
    SKU: n/a
    ₨0
    Read more
    Add to Wishlist
    Compare

Related products

  • UNI-T UT622E Handheld LCR Meter

    UNI-T UT622E Handheld LCR Meter

    0 out of 5
    (0)

    Features of UNI-T UT622E Handheld LCR Meter:

    • Up to 0.1% measurement accuracy
    • High-brightness white backlight
    • Ultra-low power consumption and long battery life (8 hours)
    • Maximum test speed: 20 times/s
    • Constant 100Q output impedance
    • Data hold and recording mode
    • Standard Mini-USB interface, SCPI command set
    SKU: n/a
    ₨102,000
    Add to cart
    Add to Wishlist
    Compare

  • UT620 Series Digital Micro Ohm Meters

    UT620 Series Digital Micro Ohm Meters

    0 out of 5
    (0)

    UT620 series are used to measure DC low resistance through 4-wire method. Some of its features are: Comparison function to determine if the device is in good condition, unknown wire length calculation (FT/M); two-way data transmission by USB interface; built-in rechargeable lithium battery. UT620 can be used in narrow space for on-site troubleshooting, such as metal coating resistance/motor and small transformer winding resistance measurement, earth system joints/welding points/power distribution cabinet bus and lead connection inspection and more.

    SKU: UN62B0TUOM
    ₨67,914 ₨77,391
    Read more
    Add to Wishlist
    Compare

  • UT612 LCR Meters

    UT612 LCR Meters

    0 out of 5
    (0)

    UT610 series is a handheld LCR digitalelectric bridge meter with stable performance, safety, reliability and autorange. It is professional to measure inductance, capacitance and resistance. Ithas the features of low power dissipation, high accuracy and fast speed. It canselect the series-parallel measurement mode; measure the quality factor ofcomponents, the loss, the phase angle, equivalent resistance and DC resistance.It can provide up to 5 kinds of frequency under the inductance, capacitance andresistance mode to satisfy the actual requirement.

     

    It is applicable to measuring and filtratingthe inductance, capacitance and resistance of lab, production line, maintenancepoint and teaching. It is the ideal tool of maintaining for many users.

    SKU: n/a
    ₨39,600 ₨45,177
    Add to cart
    Add to Wishlist
    Compare

  • UT622A Digital Inductance LCR Meter

    UT622A Digital Inductance LCR Meter

    0 out of 5
    (0)
    Specifications UT622A UT622C UT622E
    Certificates CE, RoHS
    Test frequency 100Hz, 120Hz, 1kHz, 10kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz
    Test signal level  0.1Vrms, 0.3Vrms, 1Vrms
    Output impedance 100Ω
    Measurement parameters Primary: L/C/R/Z
    Secondary: D/Q/θ/ESR    		 Primary: L/C/R/Z/DCR  Secondary: D/Q/θ/ESR
    Auto LCR √
    Test terminals Three-terminal test jacks, five-terminal test sockets
    Test rate Fast (20 times/s), medium (5 times/s), or slow (2 times/s)
    DCR test rate — — Fast (20 times/s), medium (5 times/s), or slow (2 times/s)
    Ranging mode Auto/hold
    Tolerance range 1%~20%
    Testing circuit mode Series/parallel mode
    Clearing correction Open/short circuit
    Fuse of test ports 0.1A/250V
    Communication interface Mini-USB
    LED alarm for tolerance
    (pass: green; fail: red)    		 √ √ √
    Display range
    Maximum reading 99999
    Minimum resolution 0.0001
    Maximum accuracy 0.001
    L 0.00μH~99.999H
    C 0.00pF~99.999mF
    Z/R 0.0000Ω~9.9999MΩ
    ESR 0.0000Ω~999.99Ω
    D 0.0000~9.9999
    Q 0.0000~99999
    θ -179.9°~179.9°
    DCR — — 0.01mΩ–20.000MΩ
    Temperature coefficient 0.1× (specified accuracy) /°C (0°C~18°C or 28°C~40°C)
    General Characteristics
    Power 3.7V 1800mAh lithium polymer battery; Input: 220V (1±10%), 50Hz (1±5%); Mini-USB output: 5V, 1A
    Display 2.8′ TFT LCD 320X240
    Product net weight 420g
    Product size 93mm x 192mm x 44mm
    Standard accessories Short circuit board (UTR-001), USB cable, 5V 1A power adapter, Four-terminal Kelvin testleads (UTR-L100k-H) (UT622C/E), Alligator clip test leads with rubber plugs (UTR-002)(UT622A), English manual
    SKU: n/a
    ₨57,410
    Add to cart
    Add to Wishlist
    Compare
Got Questions ? Call us 24/7! 03324478447
© Mart pakistan.com , best price in pakistan - All Rights Reserved
Got Questions ? Call us 24/7! 03324478447