UT658 USB Tester
20 in stock
Features
1. 10 sets of data storage
2. High/Low output voltage warning
3. LCD backlight
4. Light weight, portable
₨1,717
20 in stock
CompareFeatures
1. 10 sets of data storage
2. High/Low output voltage warning
3. LCD backlight
4. Light weight, portable
| Weight | 0.1 kg |
|---|---|
| Dimensions | 8 × 3 × 1 cm |
| Specifications | Range | Remark | |||
| Input Voltage Range (V) | 3V-9V | If higher than 9V, display OL | |||
| Voltage Resolution | 0.01V | ||||
| Voltage Monitoring Accuracy | ±1% | ||||
| Current Monitoring Range (A) | 0A~3A | If higher than 3A, display OL | |||
| Current Monitoring Accuracy | ±(1%±2) | Lower than 500mA:±3，(a% Reading+b Number） | |||
| Current Resolution | 0.01A | If lower than 50mA, display 0.00 | |||
| Capacity | 0~9999mAH | If higher than 9999, display OL | |||
| Capacity Data Storage | 10 Groups | ||||
| Display Way | LCD | Backlight | |||
| Warning | √ | Higher than 5.3V lower than 4.7V | |||
| Buttons | √ | ||||
| Contamination Level | 2 | ||||
| Working Temperature | 0℃∽40℃ | ||||
| Storage Temperature | -10℃∽50℃ | ||||
| Relative Humidity | <75% |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT658 USB Tester”
-
Clamp Meters
UT220 2000A ACA Digital Clamp Meters
UT220 series is a stable, safe and reliable3 1/2 AC and DC Digital Clamp Meters, full range overload protection and unique appearance design, which becomes more superior performance of electrical instruments. It is suitable for smelt, manufacturing, petroleum, electricpower, chemical industry etc. It’s an ideal tool for the maintenance and repair of the circuit, power equipment.
SKU: n/a -
Clamp Meters
UT219DS ACA DCA Professional Clamp Meters with Motor LPF Test
- UT-219 professional clamp meter series is three-proofing digital clamp meter specially designed for professional industrial users.
- The industrial design of this series is rugged and durable, and capable of withstanding the impact from 2 meters fall-down.
- The waterproof rating is up to IP54; therefore, it can be used in environment with water splashing or much more dust.
- The whole series is configured with LoZ (Low Impedance Input) AC voltage tap position, which is capable of testing the false voltage; auto backlight function can be used continuously under the circumstance of emergency power outage.
- UT-219DS is also provided with MOTOR test function, allowing to directly test the phase sequence of three phase AC motor by means of the probe. UT-219 series is much more in compliance with CAT IV 600V safety level, and certified by the German GS institution.
SKU: n/a -
Insulation Tester
HIGH VOLTAGE INSULATION TESTER KEW 3125A
• Insulation Resistance up to 1TΩ
• Short-Circuit Current up to 1.5mA
• Wide Test Voltage from 250V to 5000V
• Diagnosis Function of PI and DAR
• Newly-designed alligator clip
• It comes with a tough hard case
• Filter function reduces noise interference for obtaining stable measurement
• Large display with Bar Graph indication and backlight
• Live voltage warning
• Safety standard IEC 61010-1 CAT IV 300V / CAT III 600VSKU: n/a -
Temperature and Humidity Meter
UNI-T UT332+ Digital Temperature Humidity Meter
1. Features of UT332+ Temperature Humidity Meter
● ℃/℉ selection
● Response time: around 1 second● Humidity offset settings● Temperature offset settings● Dew point offset settings● Wet-bulb temperature offset settings● Auto power off● Data hold/data recall● MAX/MIN● Auto record time setup● LCD backlight● USB interface for data and powerSKU: n/a
Related products
-
Environment Meters
UT315 Vibration Tester
Main Features
1. Can measure acceleration, velocity and displacement
2. Can select different vibration frequency
3. High sensitivity sensor probe makes measurement accurate
4. Auto power off
5. Data hold
6. LCD backlight
7. Max mode
8. Data storage: 1,999 groups of data
9. USB interface
10. Equipped with long and short probes for different field measurements
11. Equipped with magnet pedestal for ergonomic purpose
12. Complies with CE (European Union) directives
SKU: n/a -
Environment Meters
UT352 Sound Level Meter
1. MAX/MIN modes
2. Auto power off (cancelable)
3. 63 sets data storage
4. AC/DC analog signal output
5. Over/under range indication
6. Data hold, LCD backlight
7. Simulated analog bar
8. A (ear)/C (machine) weighting modes
9. Manual/auto range selectable
10. Fast/slow response rate (fast: 125ms, slow: 1s)
11. Powered by batteries or external power source
SKU: n/a -
Environment Meters
UT333-Mini Temperature Humidity Meter
UT333 is a mini digital temperature humidity meter which adopts high-precision temperature humiditiy sensing module technology to sample, processes data, and displays results on the LCD. it uses calibrated sensing module which reduces bias and increases accuracy. It is light weight, compact, ergonomic, and user friendly, making it a great tool for monitoring indoor farming, animal husbandry, warehouse storage, public facilties, and many other areas.
SKU: n/a
There are no reviews yet.