-8%

UT70B Modern Digital Multi-Purpose Meters

Availability:

20 in stock


Portable digital multimeter UNIT UT70B with advanced design. Photoelectric separation guarentees absolutely secure galvanic isolation of multimeter from PC. … DC Voltage: 400mV / 4V / 40V / 400V / 1000V.

14,544 15,794

20 in stock

Compare

Portable digital multimeter UNIT UT70B with advanced design. Photoelectric separation guarentees absolutely secure galvanic isolation of multimeter from PC. … DC Voltage: 400mV / 4V / 40V / 400V / 1000V.

Category:
Weight 0.6 kg
Dimensions 19 × 9 × 4 cm
Specifications Range Best Accuracy
Model UT70B
DC Voltage (V) 400mV/4V/40V/400V/1000V ±(0.8%+1)
AC Voltage(V) 4V/40V/400V/750V ±(1%+5)
DC Current (A) 400mA/4000mA/40mA/400mA/10A ±(1%+2)
AC Current (A) 400mA/4000mA/40mA/400mA/10A ±(1.5%+5)
Resistance (Ω) 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ ±(1%+2)
Capacitance (F) 4nF/40nF/400nF/4μF/40μF/400μF/4μF/40μF ±(4%+3)
Frequency 4kHz/40kHz/400kHz/4MHz/40MHz/400MHz ±(0.1%+3)
Temperture(°C) -40℃~1000℃ ±(1%+3)
Temperture(°F) -40℉~1832℉ ±(1%+4)
RPM 40kRPM ±(0.1%+3)
Features
Fused 10A Range
Diode
Continuity Buzzer
Relative measurement
Full Icon Display
Sleep Mode
Low Battery Display
Input Impedance for DC Voltage Measurement 10MΩ
Max/Min Mode
Peak Hold
Data Hold
Display Backlight
Auto Ranging
Max. Display 3999
RS232
Analog Bar Graph 41
General Characteristic 
Power 9V Battery (6F22)
LCD Size 62mm×53mm
Product Color Red and Grey
Product Net Weight 600g (including holster)
Product Size 195mm×90mm×40mm
Standard Accessories Test Lead, Battery, English Manual, Point Contact Temperature Probe, Test Clip, RS232C Interface Cable, Software, Holster
Optional Accessories* Clip-On Test Lead Light (UT-TL), Built-In Test Lead Light (UT-L1), Built-In Test Lead Light Plus (UT-L2), Carrying Bag

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT70B Modern Digital Multi-Purpose Meters”

There are no reviews yet.

  • JM 8154 TOOL KIT

    0 out of 5
    (0)
    SKU: n/a
  • Et-8908 Intelligent Multimeter Precise Auto-sensing Capacitance Voltage

    0 out of 5
    (0)

    Et-8908 Intelligent Multimeter Precise Auto-sensing Capacitance Voltage

    SKU: n/a
  • TDR-420 Time Domain Reflectometer/ Cable Fault Locator

    0 out of 5
    (0)

    Product features

    • Possibility damage-free location of impedance changes of tested cables and wires such as:
      • shorted conductor,
      • open conductor / end of cable – useful during the inventory of warehouses and stores,
      • splice,
      • splitter,
      • water ingress,
      • wet splice,
      • bridge tap
      • or other changes.
    • Single measurement mode ONCE,
    • Continuously measurement mode CONT,
    • Tone signal generator TONE,
    • Two cursors to mark two places of damage along with an indication of the distance between them,
    • Built-in HELP function for easier interpretation of the reflectogram,
    • 11 available measuring ranges from 7 m to 6000 m,
    • „dead zone” limited to 0.6 m,
    • Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
    • manually set of sensitivity in 8 steps GAIN,
    • output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
    • Velocity of Propagation set in range from 10% to 99%,
    • tight and durable housing with IP67 ingress protection degree.
    • Small size and weight.
    SKU: n/a
  • ANALOG MULTIMETER MF 47A

    0 out of 5
    (0)
    Features:
    1. Multifunctional, can measure ac/dc voltage, dc current, resistance, battery test, capacitance, hfe. 2. Buzzer alarm: when it is below 50, it will wake up the alarm. 3. Battery Test: Large measuring range of 1.2-3.6v. 4. Accurate and Reliable: Clear dial, clear measurement results and high efficiency. 5. Audio Level Meter: Designed to measure amplifier gain and transmission losses with given impedant load and the measurement unit is db.
    SKU: n/a