UT890D Digital Multimeter
20 in stock
Product Features 1. 6000 Counts 2. True RMS voltage and current measurements 3. Capacitance, Resistance, Buzzer, Diode 4. Capacitance with REL function, resolution is 1pF, maximum measurement range is 6000μF 5. Highly accurate frequency measurement function; minimum resolution is 0.001Hz 6. MAX\MIN and MAX-MIN value 7. DC current minimum resolution is 0.01 A, AC current minimum resolution is 1μA, maximum range is 20A 8. HOLD function,backlight and auto power off function
₨4,560 ₨5,491
20 in stock
CompareProduct Features 1. 6000 Counts 2. True RMS voltage and current measurements 3. Capacitance, Resistance, Buzzer, Diode 4. Capacitance with REL function, resolution is 1pF, maximum measurement range is 6000μF 5. Highly accurate frequency measurement function; minimum resolution is 0.001Hz 6. MAX\MIN and MAX-MIN value 7. DC current minimum resolution is 0.01 A, AC current minimum resolution is 1μA, maximum range is 20A 8. HOLD function,backlight and auto power off function
| Weight | 0.35 kg |
|---|---|
| Dimensions | 18 × 9 × 6 cm |
| Specifications | Range | Accuracy |
| DC current(V) | 600.0mV | ±(0.5%＋4) |
| 6.000V/60.00V/600.0V | ±(0.5%+2) | |
| 1000V | ±(0.7%+10) | |
| AC current(V) | 6.000V/60.00V/600.0V | ±(0.8%+3) |
| 750V | ±(1.0%+10) | |
| AC Current(A) | 6.000mA/60.00mA | ±(1.0%+12) |
| 600.0mA | ±(2.0%+3) | |
| 20.00A | ±(3.0%+5) | |
| DC Current(A) | 60.00μA/6.000mA/60.00mA | ±(0.8%+8) |
| 600.0mA | ±(1.2%+5) | |
| 20.00A | ±(2.0%+5) | |
| Resistance(Ω) | 600.0Ω | ±(0.8%+5) |
| 6.000kΩ/60.00kΩ/600.0kΩ/6.000MΩ | ±(0.8%+3) | |
| 60.00MΩ | ±(1.0%+25) | |
| Capacitance（F） | 9.999nF | ±(5.0%+35) |
| 99.99nF~999.9μF | ±(2.5%+20) | |
| 9.999mF | ±(5.0%+10) | |
| 99.99mF | 10mF≤C≤20mF | |
| ±（10.0%+5) | ||
| Frequency(Hz) | 9.999Hz~9.999MHz | ±(0.1%+5) |
| Measurement range: 10Hz～10MHz(Auto Range), ≤100kHz∶100mVrms≤Input amplitude≤30Vrms,＞100kHz～1MHz∶200mVrms≤Input amplitude≤30Vrms，＞1MHz∶600mVrms≤Input amplitude≤30Vrms | ||
| MAX/MIN | √ | |
| True RMS | √ | |
| Frequency Response | Applies to sine wave and triangular wave, ≥200Hz, other waveforms are for reference | 40Hz~1kHz |
| Diode Test | √ | |
| hFE | √ | |
| Continuity Test | √ | |
| REL | √ | |
| Data Hold | √ | |
| Backlight Adjustment | √ | |
| Battery Voltage Indicator | √ | |
| Auto Power Off | Around 15 Minutes | √ |
| Input Impedance For DCV | ≥10MΩ | √ |
| General Characteristics | ||
| Use Environment | 18℃～28℃(64℉～82℉) Relative Temperature | |
| Battery | 9V Battery（6F22） | |
| LCD size | 63mm × 29mm | |
| Product Color | Red and Grey | |
| Product Net Weight | 300g | |
| Product Size | 186mm × 91mm × 39mm | |
| Standard Accessories | Test Leads, Battery | |
| Standard Individual Packing | Gift Box, Instructions, Warranty Card | |
| Standard Quantity Per Carton | 40PC | |
| Standard Individual Packing Size | 645mm × 450mm × 340mm | |
| Standard Carton Gross Weight | 22.8 Kg | |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT890D Digital Multimeter”
-
Battery Testers
Battery Load Tester – BT 100A
-
Sleek Design Silver Metal Body
- Easy To Use
- Convenient portable size and easy-to-read scales
- Tests batteries on or off the car in just 10 seconds
- Determines good/bad status with an extra-large display with zero adjust
- Determines state-of-charge cranking and charging volts
- Works on both 6 Volts and 12 volts batteries
SKU: n/a -
-
Process Celibrators
UT725 Multifunction Process Calibrator
Features of UT725 Multifunction Process Calibrator
Certifications: CE, UKCA
● Step/ramp functions
● Source and measure accuracy up to 0.02%● Rechargeable battery● Contrast adjustment● Auto power off (Time adjustable)● Stores and recalls setups● USB communication● Simultaneously measure and output different process signal in real time● Pressure measure with specified pressure modules, and sourcing pressure● Provides 24V loop power to transmitter while conducting mA current measurement at the same timeSKU: n/a -
Tool Kits
JM-8133 23 in 1 Screwdriver Ratchet Hand-tools
Features:
- New 23-in-1 interchangeable precise manual tool set.
- Professional portable hardware tools with perfect weight and compact design for easy implementation.
- Comes with an accessory box for small components.
- More bits of cr-v are very suitable for deep holes.
- Non-slip hard shaft provides more comfort and convenience.
- For repair laptops, mobile devices.
SKU: n/a -
Clamp Meters
UT201+ ACA Digital Clamp Meters
1. Auto range and 3/s sampling rate
2. Data hold
3. Max value hold
4. Auto power off
5. Low battery prompt, over-range prompt and auto polarity display
6. Comfortable tohold and easy to carry with (Product weight: 220g)
7. 1m drop proof
8. Complies with Double Insulationand Over Voltage standards of CAT II 600V, CAT III 300V and Pollution Degree 2
9. Complies with CE (European Union) directives
SKU: n/a -
Related products
-
Multimeters
UT107 Handheld Automotive Multi-Purpose Meters
Main Features
1. Dwell angle measurement (DWELL)
2. Tach measurement (RPM)
3. Data hold
4.12V battery test, duty ratio measurement
5. Measurement input port prompt
6. Low battery, auto polarity and over-range indication
7. Complies with CE (European Union) directives
SKU: n/a -
Multimeters
UT18B Voltage And Continuity Testers
UT18 series of test pen with measuring AC and DC voltage (including the three-phase alternating current) measurement, phase of three-phase AC power indicator, on-off test, RCD test, single pen measurement (can determine the zero line or wire), self checking, no battery detection and other functions.
Suitable for: smelting, electronics, manufacturing, defense, electric power, petroleum, chemical industry. Also used to solve complex problems of electronic, factory automation, power distribution and electrical equipment in.SKU: n/a -
Multimeters
UT71C Intelligent Digital Multimeters
Product Features
1. Can set the interval forauto data recording
2. MAX/MIN/REL measurement mode
3. Peak hold
4. Analogue bar graph
5. Measure AC and DC in the same stall (AC+DC)
6. 4-20mA loop test
7. 45Hz-100kHz frequency response measurement
8. Double backlight
9. Misplug alarm
10. Auto and manual ranges selectable
11. USB interface available
12. Bluetooth connection with a cellphone for data monitoring
13. Temperature measurement mode,equipped with K-type point contact temperature probe
14. Complies with CE (European Union) and UL (United States) directives
SKU: n/a
There are no reviews yet.