1. Dual analog channels width range 1mV/div~20V/div;
2. 7 inches widescreen LCD displays;
3. Special Print Scree Feature;
4. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device;
5. USB drive system software upgrade;
6. Storage of waveforms setups and interfaces waveforms and setups reproduction;
7. Automatic measurement of 28 waveform parameters;
8. Unique waveform recording and replay function;
9. Multilingual menu displays.
UTD2025CL Digital Storage Oscilloscope
10 in stock
1. Dual analog channels width range 1mV/div~20V/div;
2. 7 inches widescreen LCD displays;
3. Special Print Scree Feature;
4. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device;
5. USB drive system software upgrade;
6. Storage of waveforms setups and interfaces waveforms and setups reproduction;
7. Automatic measurement of 28 waveform parameters;
8. Unique waveform recording and replay function;
9. Multilingual menu displays.
₨72,000 ₨78,000
10 in stock
CompareWeight | 2.2 kg |
---|---|
Dimensions | 31 × 15 × 12 cm |
Specification | UTD2025CL |
Channels | 2 |
Bandwidth | 25MHz |
Sample Rate | 250MS/s |
Rise Time | ≤14ns |
Memory Depth | 25kpts |
Waveform Acquisition Rate | ≥2000wfms/s |
Vertical Sensitivity | 1mV/div~20V/div |
Timebase Range | 10ns/div~50s/div |
Storage | Setup,Wave,Bitmap |
Trigger Modes | Edge, Pluse, Video, Alternate |
Interface | USB OTG,Pass/Fail |
General Characteristic | |
Power | 100-240VAC, 40-440Hz |
Display | 7 Inches 64K Color TFT LCD, 400×240 |
Product Color | White and Gray |
Product Net Weight | 2.2 kg |
Product Size (W×H×D) | 306mm ×147mm × 122mm |
Standard Accessories | Probe×2 (1×,10× switchable),Power Cord, USB Cable, PC Software CD |
Standard Individual Packing | Gift Box, English Manual |
Standard Quantity Per Carton | 2 PCs |
Standard Carton Measurement (L×W×H) | 450mm × 420mm × 280mm |
Standard Carton Cross Weight | 8.5 kg |
Based on 0 reviews
Be the first to review “UTD2025CL Digital Storage Oscilloscope”
-
Wire & Cable Testers
TDR-410 Cable Fault Locator
-
Features:
- automatic or manual mode:
- the automatic fault location (AFL),
- mode with manual range selection and sensitivity,
- single measurement triggered manually or scanning continuous,
- 11 available ranges from 7 m to 4000 m selected in manual mode or matched automatically,
- maximum length of cable up to 4000 m one end of the cable,
- “Dead zone” measure limited to 0.5 m,
- 2.5 “LCD screen with backlight,
- scan automatically or manually trigger,
- sensitivity set manually or automatically adjusted,
- adjustable impedance matching,
- propagation coefficient adjustment 1% to 99%,
- waterproof and resistant to mechanical housing.
- small size and weight.
- economical power system – 30 hours of continuously scan on one battery set..
Accessories:
- 0,6 m double-wire lead: WAPRZ0X6DZBB
- red crocodile clip: WAKRORE20K02
- Krokodylek czarny: WAKROBL20K01
- cover M-2: WAFUTM2
- automatic or manual mode:
SKU: n/a -
-
Oscilloscopes
UTD2102CEX-II Digital Storage Oscilloscope
1. 2 channels
2. 70MHz/100MHz bandwidth; 1GSa/s real-time sampling rate3. Up to 28Mpts memory depth4. Calibration signal output: 10Hz, 100Hz, 1kHz (by default),10kHz or 100kHz5. Max 10Mpts waveform record6. 8-inch TFT LCD, WVGA (800X480)SKU: n/a -
Usb Tester
UT658 A USB Testers
Features of UT658 Series USB Testers
Certifications: CE, UKCA
● Type-A/C interface
● CE certification
● 10 sets of data storage
● Loop equivalent resistance measurement (1-480Ω)
● Same screen shows voltage, current, power, capacity, etc.
● Support fast charge protocol
SKU: n/a
There are no reviews yet.