UTG9002C-II Function/Arbitrary Waveform Generator
5 in stock
1. Output waveforms: Sine, square, ramp, pulse, noise, DC, arbitrary
₨44,400 ₨48,899
5 in stock
CompareWeight | 2.8 kg |
---|---|
Dimensions | 26 × 11 × 32 cm |
Specifications | |
Model | UTG9002C-II |
Channel | 1 |
Bandwidth | 2MHz |
Sampling rate | 125MS/s |
Vertical resolution | 14 bits |
Waveforms | Sine, square, pulse, ramp, noise, DC, arbitrary (20 sets inside ) |
Sweep modes | Logarithmic, linear |
Frequency Characteristics | |
Sine | 1μHz~2MHz |
Square | 1μHz~2MHz |
Ramp | 1μHz~200kHz |
Pulse | 1μHz~2MHz |
Arbitrary | 1μHz~1MHz |
Resolution | 1μHz |
Accuracy | Within 90 days ± 50ppm |
Within 1 year ± 100ppm | |
18℃~28℃ | |
Output Characteristics | |
Impedance | 50Ω/High Z |
Amplitude range | 1mVpp~10Vpp (50Ω); 2mVpp~20Vpp (high Z) |
DC offset range | -5Vpp~5Vpp (50Ω) (AC+DC); -10Vpp~10Vpp (high Z) (AC+DC) |
Amplitude resolution | 1mV |
General Characteristics | |
Power | 100~240VAC, 50Hz/60Hz |
Display | EBTN LCD |
Product color | White and grey |
Product net weight | 2.8kg |
Product size | 265mm x 110mm x 320mm |
Standard accessories | USB interface cable, power cord, BNC cable with alligator clips , PC software CD |
Standard individual packing | Carton box |
Standard quantity per carton | 2pcs |
Standard carton measurement | 380mm x 330mm x 320mm |
Standard carton gross weight | 7kg |
Based on 0 reviews
Be the first to review “UTG9002C-II Function/Arbitrary Waveform Generator”
-
DC Power Supplies
YIHUA 605D DC Power Supply
YH-605D communication maintenance power supply
605D communication maintenance power supply is a single line output of stabilized high accuracy
DC stabilized power supply. The output voltage and current can be adjusted continuously within
the rated range. Double digital display shows output voltage and current independently. Several
protection functions include current limitation, voltage reduction, short circuit protection, over-
temperature protection, etc.
The design is applied to production line of the plant, maintenance, laboratories and is also
a necessary device for the communication industry.
SKU: n/a -
-
Phase Detector Meters
TKF-12 Phase Sequence Tester
Phase sequence indication (direction of field rotation) in the power network with rated phase-to-phase voltage (120…690 V) AC by LED signalization.
Operation in the power network with frequency range 10…70 Hz.
Indication of the voltage presence in the particular phases by neon lamps signalization.
Power supply from the tested network (continuous operation to 15 minutes for max. voltage).
Protection against faulty indication of field rotation.SKU: n/a -
LCR Meter
UT620 Series Digital Micro Ohm Meters
UT620 series are used to measure DC low resistance through 4-wire method. Some of its features are: Comparison function to determine if the device is in good condition, unknown wire length calculation (FT/M); two-way data transmission by USB interface; built-in rechargeable lithium battery. UT620 can be used in narrow space for on-site troubleshooting, such as metal coating resistance/motor and small transformer winding resistance measurement, earth system joints/welding points/power distribution cabinet bus and lead connection inspection and more.
SKU: UN62B0TUOM
There are no reviews yet.