UTG9002C-II Function/Arbitrary Waveform Generator
5 in stock
1. Output waveforms: Sine, square, ramp, pulse, noise, DC, arbitrary
₨44,400 ₨48,899
5 in stock
Compare| Weight | 2.8 kg |
|---|---|
| Dimensions | 26 × 11 × 32 cm |
| Specifications | |
| Model | UTG9002C-II |
| Channel | 1 |
| Bandwidth | 2MHz |
| Sampling rate | 125MS/s |
| Vertical resolution | 14 bits |
| Waveforms | Sine, square, pulse, ramp, noise, DC, arbitrary (20 sets inside ) |
| Sweep modes | Logarithmic, linear |
| Frequency Characteristics | |
| Sine | 1μHz~2MHz |
| Square | 1μHz~2MHz |
| Ramp | 1μHz~200kHz |
| Pulse | 1μHz~2MHz |
| Arbitrary | 1μHz~1MHz |
| Resolution | 1μHz |
| Accuracy | Within 90 days ± 50ppm |
| Within 1 year ± 100ppm | |
| 18℃~28℃ | |
| Output Characteristics | |
| Impedance | 50Ω/High Z |
| Amplitude range | 1mVpp~10Vpp (50Ω); 2mVpp~20Vpp (high Z) |
| DC offset range | -5Vpp~5Vpp (50Ω) (AC+DC); -10Vpp~10Vpp (high Z) (AC+DC) |
| Amplitude resolution | 1mV |
| General Characteristics | |
| Power | 100~240VAC, 50Hz/60Hz |
| Display | EBTN LCD |
| Product color | White and grey |
| Product net weight | 2.8kg |
| Product size | 265mm x 110mm x 320mm |
| Standard accessories | USB interface cable, power cord, BNC cable with alligator clips , PC software CD |
| Standard individual packing | Carton box |
| Standard quantity per carton | 2pcs |
| Standard carton measurement | 380mm x 330mm x 320mm |
| Standard carton gross weight | 7kg |
Brand
UNI T
Based on 0 reviews
Be the first to review “UTG9002C-II Function/Arbitrary Waveform Generator”
-
Environment Meters
UT361 Anemoscopes
UT360 series anemograph is a professional anemograph used to measure wind temperature, wind speed and wind capacity, which is of stable performance, reliable and of neoteric appearance. The device can be widely used in the fields such as environmental protection, labor hygiene, industrial enterprise, scientific research. It is applied to environmental noise measurement, machinery equipment noise and architectural acoustics measurement.
SKU: n/a -
Multimeters
CMM-40 Industrial Multimeter
The most important features of CMM-40 are:
- autoranging/manual range selection,
- „DATA HOLD” function, for holding measured values,
- „REL” function, which allows you to make measurements relative to a stored reference value,
- „MAX/MIN” function,
- „PEAK HOLD” function,
- memory for 2000 measurement resultS,
- continuity test with acoustic signalling (beeper),
- „AUTO-OFF” function,
- display 4¾ digits (40000 max),
- double molded, waterproof casing.
SKU: n/a -
Clamp Meters
UT206A+
1. 1000A AC current measurement
2. 1000V AC/DC voltage measurement
3. 600A inrush current measurement (UT206A+)
4. Temperature (UT206A+)
5. NCV (UT206A+)
6. ACV frequency 10Hz～10kHz
7. Jaw opening: 45mm
8. Resistance / capacitance / frequency measurement
9. Auto range / backlight / low battery indication
10. Continuity / diode / duty cycle
11. MAX/MIN
12. Data hold / flashlight / relative mode
13. Auto power off
14. CAT II 1000V/CAT III 600VSKU: n/a
Related products
-
-
Function Generators
UTG2062B Function/Arbitrary Waveform Generator
1. 1μHz full-band resolution
2. 5MHz~30MHz pulse waveform, adjustable rise/fall time3. 14-bit/16-bit vertical resolution4. Two equivalent-performance channels5. Max arbitrary waveform length of 8k/16M points; 48/1616. non-volatile waveforms storageSKU: n/a -
Function Generators
UTG2025A Function/Arbitrary Waveform Generator
1. 1μHz full-band resolution
2. 5MHz~30MHz pulse waveform, adjustable rise/fall time3. 14-bit/16-bit vertical resolution4. Two equivalent-performance channels5. Max arbitrary waveform length of 8k/16M points; 48/1616. non-volatile waveforms storageSKU: n/a -
There are no reviews yet.