UTP1306 is a switch-type DC regulated power supply with single channel, which has OCP/OVP protection function, 3 groups of storage/recall preset values and output switch.
UTP1306 DC Power Supply
Specifications | ||
Model | UTP1306 | |
Output voltage | 0~32V | |
Output current | 0~6A | |
Output power | 192W | |
Load regulation | CV<0.1%+5mVCC<0.2%+3mA | |
Accuracy(25℃±5℃) | Voltage | <0.1%+5mV |
Current | <0.2%+3mA | |
Ripple and noise | ≤1mVrms | |
Output regulation resolution Reliability | CV: 10mV (typical), CC: 1mA (typical); MTBF(e): ≥2000hrs | |
Display mode | LED voltage and current dual display | |
Feature | Auto conversion of constant voltage and current with current limit protection | |
General Characteristics | ||
Power | Input voltage: 110V AC/220V AC; 50Hz~60Hz | |
Product color | White and grey | |
Product net weight | 2.5kg | |
Product size | 80mm x 150mm x 230mm | |
Standard accessories | Power cord, output cables |
₨26,400 ₨28,980
Weight | 2.5 kg |
---|---|
Dimensions | 8 × 15 × 23 cm |
Based on 0 reviews
Be the first to review “UTP1306 DC Power Supply”
-
Rework & Soldering Station
YH 992D A+ 3 IN 1 REWORK STATION
parameters Rated voltage AC 220V±10% 50Hz power 720W±10%(Max) 300℃ Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 250W±10% Working environment 0~40℃ relative humidity<80% Storage environment -20~80℃ relative humidity<80% Dimensions 255*188*125mm Weight 5.11KG Parts parameters Hot air gun Soldering iron Operating Voltage AC 220V±10% 50Hz AC 26V±10% 50Hz Output power 550W 75W Temperature range 100℃~480℃ 200℃~480℃ Air Supply Mode Diaphragm pump — Air Flow 28L/min(MAX) — Temperature Stability ±1℃ (Static) ±1℃ (Static) Display Mode LCD display LCD display Calibration Mode The PID digital program proofreading
The PID digital program proofreading
PID Temperature Calibration Cycle rapidly 20ms high-speed 100ms Heating Core Ceramic columned heating element. Imported heater Standard nozzles/tips (3mm,5mm,8mm,10mm,13mm) 5PCS nozzles
B Tip ground impedance — <2Ω Tip of ground voltage — <2mV SKU: n/a -
Wire & Cable Testers
UT18D Voltage and Continuity Tester
1. Auto power off, the conductor to be measured is greater than 12V
2. Phase rotation test3. Continuity test with buzzer and LED indication4. Low battery indication and over voltage prompt5. Flashlight6. Test live voltage without batteries7. Buzzer and silent modes available8. Auto range9. Polarity indicationSKU: n/a -
Rework & Soldering Station
YH 862BD+ REWORK STATION
Machine parameter Rated voltage AC 220V±10% 50Hz Total Power 730W±10%(max) 300℃ Constant Temperature Power (High-Speed PID Programmed
to Energy Savings)
250W±10% Operating Environment 0~40℃ Relative humidity<80% Storage temperature -20~80℃ Relative humidity<80% Dimensions 31.5*22*22cm weight 3.5KG Performance Parameter Hot air gun Soldering iron Operating Voltage AC 220V±10% 50Hz AC 26V±10% 50Hz Output power 650W 75W temperature range 100℃~480℃ 200℃~480℃ Air Supply Mode Brushless-Motor Fan — airflow 120L/min(max) — Temperature stability ±2℃ (static) ±2℃ (static) Display Mode Red LED Digital Display Red LED Digital Display Calibration Mode PID Digitally Programmed Calibration
PID Digitally Programmed Calibration
Temperature correction PID digital program proofreading
PID digital program proofreading
SKU: n/a -
DC Power Supplies
UTP1310 Switching DC Power Supply
Specifications Model UTP1310 Output voltage 0~32V Output current 0~10A Output power 320W Load regulation CV<0.1%+5mV
CC<0.2%+3mAPower regulation CV<0.01%+5mV
CC<0.2%+3mAOutput regulate resolution CV: 10mV (typical), CC: 1mA (typical) MTBF(e): ≥2000hrs Programming accuracy
(25℃±5℃)Voltage <0.1%+1digit Current <0.2%+3mA Ripple and noise
(20Hz~20MHz)Voltage ≤10mVrms Current ≤5mArms Display mode LED voltage and current dual display General Characteristics Power Input voltage: 110V AC/220V AC, 50Hz~60Hz Display EBTN LCD Product color White and grey Product size (W×H×D) 80mm x 150mm x 230mm Product net weight 2.5kg SKU: n/a -
Wire & Cable Testers
UTP 03 60MHZ PROBE
Attenuation ratio: 1× and 10× optional.
Portable design according to ergonomics.
Integral injection moulding makes the usage more flexible and the oscillograph able to adapt more testing situations.
Safety standards: it has passed the CE Attestation of the European Community.
Compatible with domestic and international digital and analogue oscilloscopes in relevant frequency.
Measurement in intermediate and low-frequency signals.
Accessories included by PP series passive voltage rapier.
Adjusting tool: adjusts compensation capacitance to assure the rapier match with oscillograph.
Contractive-type acuminate hook.
12cm earth wire with an alligator clip.
Locating sleeve adapts to IC testing.
Double-nip wire.
SKU: n/a
There are no reviews yet.