UTP1300 series power supply is an economical switch-type DC regulated power supply with single output. It has a pure output, excellent performance indicators, and can meet diverse testing needs. Used in product debugging and maintenance, quality control and testing, production automation testing, teaching experiments, etc.
DC Power Supplies
UTP1310 Switching DC Power Supply
Specifications | ||
Model | UTP1310 | |
Output voltage | 0~32V | |
Output current | 0~10A | |
Output power | 320W | |
Load regulation | CV<0.1%+5mV CC<0.2%+3mA |
|
Power regulation | CV<0.01%+5mV CC<0.2%+3mA |
|
Output regulate resolution | CV: 10mV (typical), CC: 1mA (typical) | |
MTBF(e): | ≥2000hrs | |
Programming accuracy (25℃±5℃) |
Voltage | <0.1%+1digit |
Current | <0.2%+3mA | |
Ripple and noise (20Hz~20MHz) |
Voltage | ≤10mVrms |
Current | ≤5mArms | |
Display mode | LED voltage and current dual display | |
General Characteristics | ||
Power | Input voltage: 110V AC/220V AC, 50Hz~60Hz | |
Display | EBTN LCD | |
Product color | White and grey | |
Product size (W×H×D) | 80mm x 150mm x 230mm | |
Product net weight | 2.5kg |
₨33,000 ₨33,340
Weight | 2.5 kg |
---|---|
Dimensions | 8 × 15 × 23 cm |
Based on 0 reviews
Be the first to review “UTP1310 Switching DC Power Supply”
-
Laser Level Meter
LM 571LD-I Laser Level Meter
Specifications LM571LD-I Display type Green Laser type 1V1H Expanded Angle H130°/V150° Laser class Class 2 Light source 10mW Laser wavelength 510nm H/V accuracy ±2mm/10m Self-leveling range 3°±1° Self-leveling time 3s Working distance (Line) 20m; >30m with detector Operating time >12h (All lasers on) Tripod mounting hole √ SKU: n/a -
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A->B (Rising edge), Delay A->B (Falling edge), Delay B->A (Rising edge), Delay B->A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a -
Optical Multimeter
UT 693D Optical Multimeter (Power Meter & VFL)
Specifications Description UT693D Optical power meter Wavelength range 800nm~1700nm √ Calibrated wavelength 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm, 1650nm Measurement range UT692D/UT693D: -70~10dBm, UT692G: -50~26dBm Uncertainty ±5% Display resolution Linear: 0.1%, logarithmic: 0.01dBm Connector FC/SC/ST Detector type InGaAs Visual faultlocator Wavelength 650nm±10nm √ Power 10mW (measurable optical fiber length: approximately 8~10km) Mode Continuous/Pulse Connector FC/SC/ST Features Low battery indication √ Auto power off √ IP rating IP65 Drop test 2m General Characterisitics Power 1.5V battery (LR6) x 3 Display 63mm x 40mm Product color Red and grey Product net weight 300g Product size 189mm x 87mm x 45mm Standard accessories Batteries, carrying bag Standard individual packing Gift box, English manual Standard quantity per carton 10pcs Standard carton measurement 295mm x 250mm x 210mm Standard carton gross weight 5.66kg SKU: n/a -
Rework & Soldering Station
YH 852 (BRUSHLESS FAN) Rework Station
Machine parameter Rated voltage AC 220V±10% 50Hz Machine power 700W±10%(MAX) working environment 0~40℃ relative humidity <80% Storage temperature -20~80℃ relative humidity <80% Machine size 25.5*18.8*12.5cm weight 3.55KG Part of performance parameters Hot air gun Soldering iron Working voltage AC 220V±10% 50Hz AC 26V±10% 50Hz Output power 650W 60W temperature range 100℃~500℃ 200℃~500℃ Mode of airflow brushless fan — airflow 120L/min(max) — Temperature stability ±15℃ (static) ±10℃ (static) Display two LED (red/green) — heater Heating core ceramics heater common heater Tips to ground impedance — <2Ω Tips voltage to ground — <2mV SKU: n/a
There are no reviews yet.