UT18D Voltage and Continuity Tester
10 in stock
1. Auto power off, the conductor to be measured is greater than 12V
₨12,000 ₨13,000
10 in stock
Compare
| Weight | 0.3 kg |
|---|---|
| Dimensions | 27 × 8 × 3 cm |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT18D Voltage and Continuity Tester”
-
Wire & Cable Testers
UTP 04 100MHZ PROBE
Features Of UNI-T Best Passive Probe 100MHz UTP04:
This passive probe is good oscilloscope accessories, it is suitable for oscilloscope.
Stable performance and not easy to break.
This can provide a professional and accurate measurement.
Widely used, it can satisfy most peoples.
A good helper for instrument engineer.
SKU: n/a -
Soldering Irons
YH 947-VII Soldering Iron
1.Small size, light weight, easy to carry.
2.Use the internal heating type heating core, high efficiency.
3.947VII temperature adjustable.
4.947VII with a power switch, when the appliance is not in use, you can turn off the
switch, safe and energy saving.
5.The internal use SMT double-sided board manufacturing process, the process is neat
and the solder joint is firm.
6.The handle uses completely new environmental protection material, safe and durable.
SKU: n/a -
DC Power Supplies
UTP1306 DC Power Supply
Specifications Model UTP1306 Output voltage 0~32V Output current 0~6A Output power 192W Load regulation CV＜0.1%+5mVCC＜0.2%+3mA Accuracy(25℃±5℃) Voltage ＜0.1%+5mV Current ＜0.2%+3mA Ripple and noise ≤1mVrms Output regulation resolution Reliability CV: 10mV (typical), CC: 1mA (typical); MTBF(e): ≥2000hrs Display mode LED voltage and current dual display Feature Auto conversion of constant voltage and current with current limit protection General Characteristics Power Input voltage: 110V AC/220V AC; 50Hz~60Hz Product color White and grey Product net weight 2.5kg Product size 80mm x 150mm x 230mm Standard accessories Power cord, output cables SKU: n/a -
Laser Distance Meters
LM 120PRO Laser Distance Meter
Specifications LM120PRO Display type EBTN Display size 2.4-inches Range 120m Min. display unit 0.001m Measurement units m/ft/in/ft+in Measurement basis Front/middle/rear Accuracy ±2mm Laser class 2 Laser type 630~670nm, ﹤1mW Features Single measurement √ Continuous measurement √ Max/Min/Area √ Volume/Pythagoras √ Add/Subtract/Triangle area √ Auto leveling horizontal/vertical √ Electronic leveler √ Data storage 20 groups Auto laser off 30s without operation Auto power off √ Auto backlight off √ Battery status display √ USB charging √ Tripod mounting hole √ General Characteristics Power 1.2V AAA recharge battery x 3 Product color Red and grey Product net weight 170g Product size 59mm x 28mm x 137mm Standard accessories Carrying bag, USB interface cab Standard individual packing Gift box, English manual Standard quantity per carton 20pcs Standard carton measurement 390mm x 255mm x 345mm Standard carton gross weight 8.3kg SKU: n/a -
SMD Tester
UT 116A SMD Tester
Specifications Model UT116A Display count 3000 Resistance 30MΩ Capacitance 30mF Diode test 3V LED/stabilivolt About 21V/1mA Continuity Test ＜30Ω DCV 36V Auto range √ Auto scan identification √ Auto power off √ General Characteristics Power 1.5V battery (R03) x 2 Display 39mm x 20mm Product color Red and grey Product net weight About 80g Product size 204mm x 33mm x 25mm Standard accessories Battery SKU: n/a -
Clamp Meters
UT 207 CLAMP METER
1. 1000A AC/DC current measurement, 3 times/s sampling rate 2. True RMS 3. Inrush current 4. Zeroing function 5. Full icon display 6. MAX/MIN 7. Data hold; Duty cycle 8. Auto power off and low battery indication 9. Diode; Continuity buzzer; Input Impedance for DCV
SKU: n/a
Related products
-
Wire & Cable Testers
TDR-410 Cable Fault Locator
-
Features:
- automatic or manual mode:
- the automatic fault location (AFL),
- mode with manual range selection and sensitivity,
- single measurement triggered manually or scanning continuous,
- 11 available ranges from 7 m to 4000 m selected in manual mode or matched automatically,
- maximum length of cable up to 4000 m one end of the cable,
- “Dead zone” measure limited to 0.5 m,
- 2.5 “LCD screen with backlight,
- scan automatically or manually trigger,
- sensitivity set manually or automatically adjusted,
- adjustable impedance matching,
- propagation coefficient adjustment 1% to 99%,
- waterproof and resistant to mechanical housing.
- small size and weight.
- economical power system – 30 hours of continuously scan on one battery set..
Accessories:
- 0,6 m double-wire lead: WAPRZ0X6DZBB
- red crocodile clip: WAKRORE20K02
- Krokodylek czarny: WAKROBL20K01
- cover M-2: WAFUTM2
- automatic or manual mode:
SKU: n/a -
-
Wire & Cable Testers
UTP 04 100MHZ PROBE
Features Of UNI-T Best Passive Probe 100MHz UTP04:
This passive probe is good oscilloscope accessories, it is suitable for oscilloscope.
Stable performance and not easy to break.
This can provide a professional and accurate measurement.
Widely used, it can satisfy most peoples.
A good helper for instrument engineer.
SKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Wire & Cable Testers
UT681L Cable Tester
Main Features
1. Tests Ethernet cables and telephone lines
2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing
3. Ethernet cables: Shielded/Unshielded test
4. Visible LED indication
5. Automatically check circuit breakage, short circuit and cross circuit
6. Can toggle between fast and slow speed test modes
7. Single key operation
8. Manual/auto power off (after 10-minute inactivity)
9. Low battery indication
10. Power supplied by 9V layer-built battery
SKU: n/a
There are no reviews yet.