1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel. While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. Energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
₨1,450 ₨1,679
Model:947-I
Power supply voltage:110V 60HZ/220V 50HZ
Power : ≤35W/45W/60W
Working temperature :0-40℃
Welding head ground resistance :＜2Ω
| Weight | 0.2 kg |
|---|---|
| Dimensions | 27 × 7 × 7 cm |
Attenuation ratio: 1× and 10× optional.
Portable design according to ergonomics.
Integral injection moulding makes the usage more flexible and the oscillograph able to adapt more testing situations.
Safety standards: it has passed the CE Attestation of the European Community.
Compatible with domestic and international digital and analogue oscilloscopes in relevant frequency.
Measurement in intermediate and low-frequency signals.
Accessories included by PP series passive voltage rapier.
Adjusting tool: adjusts compensation capacitance to assure the rapier match with oscillograph.
Contractive-type acuminate hook.
12cm earth wire with an alligator clip.
Locating sleeve adapts to IC testing.
Double-nip wire.
| Specifications | Range | UT39E+ | |||
| Category ratings | CAT II 1000V, CAT III 600V | ||||
| DC voltage (V) | 200mV/2V/20V/200V/1000V | ±(0.05%+3) | |||
| AC voltage (V) | 200mV/2V/20V/200V/1000V | ±(0.5%+10) | |||
| DC current (A) | 2000uA/20mA/200mA/2A/20A | ±(0.5%+5) | |||
| AC current (A) | 2000uA/20mA/200mA/2A/20A | ±(0.8%+10) | |||
| Resistance (Ω) | 200Ω/2kΩ/20kΩ/2MΩ/20MΩ/200MΩ | ±(0.3%+2) | |||
| Capacitance (F) | 2000uF | ±(4%+20) | |||
| Frequency (Hz) | 10Hz~2MHz | ±(0.1%+3) | |||
| Temperature | -40℃~1000℃ | ±(1%+5) | |||
| -40℉~1832℉ | ±(1.5%+5) | ||||
| Conductance (nS) | 0.1~100nS | ±(1%+3) | |||
| Display count | 20000 | ||||
| NCV | √ | ||||
| General Characteristics | |||||
| Power | 1.5V battery (R03) x 2 | ||||
| Display | 56.5mm x 36mm | ||||
| Product net weight | 330g | ||||
| Product size | 175mm x 83mm x 53mm | ||||
| Standard accessories | Test leads, temperature probe, English manual | ||||
| . | |||||
| Specifications | |
| Model | UPO2104E |
| Bandwidth | 100MHz |
| Channels | 4 |
| Sampling rate | 1GS/s |
| Memory depth | 56Mpts (single channel) |
| Waveform capture rate | 83,000wfms/s |
| Time base scale (s/div) | 5ns/div~50s/div |
| Input impedance | (1MΩ±2%) II (20pF±3pF) |
| Vertical scale (V/div) | 1mV/div~20V/div (1MΩ) |
| Waveform record | 65,000 Frames |
| Trigger types | Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code |
| Waveform operations | A+B, A-B, A×B, A/B, FFT, logic operation, advanced |
| Auto measurements | Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A-＞B (Rising edge), Delay A-＞B (Falling edge), Delay B-＞A (Rising edge), Delay B-＞A (Falling edge). |
| Number of measurements | Display 5 measurements at the same time |
| Measurement statistics | Average, Max, Min, Standard Deviation, Number of Measurements |
| Frequency counter | Hardware 6 bits counter (Channels are selectable) |
| Standard interfaces | USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) |
| General Characteristics | |
| Power | 100V~240VAC, 50Hz/60Hz |
| Display | 8 inches TFT color LCD Display with WVGA (800×480) resolution |
| Product color | White and grey |
| Product net weight | 3.5kg |
| Product size | 336mm×164mm×108mm |
| Standard accessories | Probe×2/4 (1×, 10× switchable), Power cord, USB cable |
| Standard individual packing | Carton box |
| Standard quantity per carton | 2pcs |
| Standard carton measurement | 450mm×420mm×280mm |
| Standard carton gross weight | 9.7kg |
Model: YH-995D+
· Centigrade/Fahrenheit Programmable
· Temperature Compensation Programmable: -50 °C to +50 °C
· Manual / Automatic Programmable
· Cool Air / Hot Air Changeable
· Temperature Presettable
· Sleep Mode: 0-99 Minutes
· Samsung Dual Core Microcomputer Processor
· ESD Safe
· Total Power Consumption: 720 Watts
· Air Flow Type: Brushless Fan
· Max Air Flow Volume: 120L/min
· Hot Air Gun: 650 Watts
. Temperature Range 212° F ~ 896°F/100°C ~ 480°C with Auto Cool Down
· Hot Air Gun Temperature Stability: ±1.8°F/1.0°C
· Hot Air Gun Tube Material: 100% Silicone (Virtually No Memory)
· Soldering Iron: 65 Watts
. TemperatureRange 392°F ~ 896°F/200°C ~ 480°C
· Soldering Iron Temperature Stability: ±3.6°F/2.0°C
· Soldering Iron Cord Material: 100% Silicone (Virtually No Memory)
· Working Environment: 0°F ~ 122°F/ 0°C ~ 50°C
· Storage Environment: -68°F ~ 176°F/-20°C ~ 80°C
· Inner box Dimensions: 29*20*18cm
· Unit Weight: 3.2 KG
· QTY:8PCS/CTN
· Outer carton size:59.5*41*36cm
· G.W:25.6KG/CTN
Features:
UT207 1000A Digital Clamp Meters 
UT210E ACA DCA Digital Clamp Meters 
JM-Y02 Precision Electronic Screwdriver Set For Maintenance 
UT L25 Meter Lead 
UT202A+ Digital Clamp Meter 
There are no reviews yet.