YH 947-II Soldering Iron
1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel.While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
₨1,500 ₨1,974
Model:947-II
Power supply voltage:110V 60HZ/220V 50HZ
Power:≤60W
Temperature range:220-480℃
Temperature stability :±1℃（static state)
| Weight | 0.2 kg |
|---|---|
| Dimensions | 27 × 7 × 7 cm |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 947-II Soldering Iron”
-
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A-＞B (Rising edge), Delay A-＞B (Falling edge), Delay B-＞A (Rising edge), Delay B-＞A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a -
Rework & Soldering Station
YH 706 REWORK STATION
Model 706 872D+ Power Consumption 720W 720W Measurement 124*187*157MM 124*187*157MM Weight 4.5KG 4.8KG Working environment 0~50°C 0~50°C/0~122°F Storage environment -20-80°C -20-80°C Hot Air Reworks Airflow type dual-turbo blower diaphragm pump spiral wind Air Flow ≤168L/min ≤24L/min Temperature Range 100°C-480°C 100°C-480°C Temperature Stability ±1°C ±1°C Display Type Digital Display Digital Display Handle length ≥90CM ≥90CM Soldering Iron Temperature Range 200°C-480°C 200°C-480°C Temperature Stability ±2°C ±2°C Tip of ground voltage <2mv<> <2mv<> Tip ground impedance <2 ohm <2 ohm Display Type Digital Display Digital Display Handle length ≥100CM ≥100CM SKU: n/a -
DC Power Supplies
YH 1502D+ DC POWER SUPPLY
Parameters
Rated voltage AC220V±10% 50Hz Operating environment 0～40℃ relative humidity＜80％ Storage temperature －20～80℃ relative humidity＜80％ Dimensions of the machine body 27*14*22cm Weight 1.9KG Performance parameters Output voltage Adjustable continuously within 0～15V Output current Adjustable continuously within 0～2A (current limitation adjustment when above 0.2A) Output power 15W Source effect ≤1mV Load effect ≤0.33% Ripple noise ≤3mVrms（5Hz ~ 1MHz）/≤3mArms Display accuracy 0.1V/0.1A/1mA Protection mode Over-current, short circuit, over-temperature protection Dissipation mode Air cooling SKU: n/a -
Rework & Soldering Station
YH 938D SMD STATION
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.SKU: n/a -
Multimeters
UT 39E+ Modern Digital Multimeter
Specifications Range UT39E+ Category ratings CAT II 1000V, CAT III 600V DC voltage (V) 200mV/2V/20V/200V/1000V ±(0.05%+3) AC voltage (V) 200mV/2V/20V/200V/1000V ±(0.5%+10) DC current (A) 2000uA/20mA/200mA/2A/20A ±(0.5%+5) AC current (A) 2000uA/20mA/200mA/2A/20A ±(0.8%+10) Resistance (Ω) 200Ω/2kΩ/20kΩ/2MΩ/20MΩ/200MΩ ±(0.3%+2) Capacitance (F) 2000uF ±(4%+20) Frequency (Hz) 10Hz~2MHz ±(0.1%+3) Temperature -40℃~1000℃ ±(1%+5) -40℉~1832℉ ±(1.5%+5) Conductance (nS) 0.1~100nS ±(1%+3) Display count 20000 NCV √ General Characteristics Power 1.5V battery (R03) x 2 Display 56.5mm x 36mm Product net weight 330g Product size 175mm x 83mm x 53mm Standard accessories Test leads, temperature probe, English manual . SKU: n/a
There are no reviews yet.