YH 947-II Soldering Iron
1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel.While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
₨1,500 ₨1,974
Model:947-II
Power supply voltage:110V 60HZ/220V 50HZ
Power:≤60W
Temperature range:220-480℃
Temperature stability :±1℃（static state)
| Weight | 0.2 kg |
|---|---|
| Dimensions | 27 × 7 × 7 cm |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 947-II Soldering Iron”
-
Wire & Cable Testers
UTP 04 100MHZ PROBE
Features Of UNI-T Best Passive Probe 100MHz UTP04:
This passive probe is good oscilloscope accessories, it is suitable for oscilloscope.
Stable performance and not easy to break.
This can provide a professional and accurate measurement.
Widely used, it can satisfy most peoples.
A good helper for instrument engineer.
SKU: n/a -
Rework & Soldering Station
YH 939D+ SOLDERING STATION
PARAMETROSMODEL 939D+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a -
Clamp Meters
UT-CS09A Flex Clamp Sensor
Specifications Range UT-CS09A AC current (A) 30A/300A/3000A ±(3%+5) Frequency response (Hz) 45Hz~500Hz √ Features Flex clamp size UT-CS09A: 25.4cm (10 inches); UT-CS09C: 45.7cm (18 inches) Operating temperature 0℃~50℃ Storage temperature -20°C~60°C Storage humidity ≤80%RH Low battery indication About 3.3V Range selection Manual General Characterisitics Power 1.5V battery (R03) x 3 Product color Red and grey Product net weight 260g Product size 267mm x 119.4mm x 34mm Standard accessories Batteries, BNC adapter Standard individual packing Blister, English manual Standard quantity per carton 10pcs Standard carton measurement 495mm x 405mm x 225mm Standard carton gross weight 7kg SKU: n/a -
Tool Kits
JM-6092A 57 in 1 Multi-Functional Screwdriver Hand Tool Set
- The tool box is manufacture from PP plastic, transparent and clear.
- Plastic design, strong resistance to fall, new pressure switch, strong and beautiful.
- The key position uses high quality CR-V material, the whole is durable: the extension pole that is equipp can solve a few narrow areas easily.
- The tool is equipp with strong magnetic anti-slide handle, which accords with the ergonomic appearance
- Double-side ball anti-slip design, with strong magnetic multi-angle lengthening bar, 9 knots are adjustable, make it easier to use .
- 57 Pcs in 1 Electronic bits Screwdriver Tools Kit Repair set
- Model: JM-6092A
- Package weight: 658g/1.45lb
- 32pcs- 6.35mm CR-V bits; v 20pcs- 4mm CR-V precision bits
- lpcs- 120mm PP&TPR plastic precision handle
- 1pcs- 125mm PP&TPR plastic non-slip handle
- 1pcs- 125mm Aluminum extension rod
- lpcs- 60mm Fine steel extension rod
- 1pcs- 130mm multi angle extension rod
SKU: n/a
Related products
-
Plier and Wire Strippers, Tools and Hardware
JM-CT4-12 Electrician Wire Stripping Tool
Features:
- Standard specs, form-ground, knife-type blades for accuracy, easy stripping without nicking insulation.
- Built-in wire cutter and looping holes.
- Convenient plier nose and sharp edge for pulling out the wire easily without damaging the wire cores.
- Spring-loaded automatic opening
- Sharp serrated edges in a plier style for wire pulls and loops.
SKU: n/a -
Tools and Hardware
JM 6092B TOOL KIT
JM-6092B 58 in 1 Multi-functional Screwdriver Hand Tool Set Household also called 58-in-1 interchangeable precise manual tool set, jakemy jm 6092B, jakemy tools review, repair tools, Tool kit, Hand tools Set, jakemy precision screwdriver set, JM 6092B, jakemy screwdriver set 58 in 1 is a professional portable hardware tools; it is Light weight & has compact design. It contains High hardness and good toughness, PP&TPR material and non-slip handle. This set of tools is designed for repairing mobile phones (not for iPhone), hard drives and other electronic products. Brand: JAKEMY Model: JM-6092B Features: 1.This set of tools are designed for repair mobile phones, hard drives and other electronic products. 1. 58-in-1 interchangeable precise manual tool set. 2. Professional portable hardware tools. 3. Light weight, compact design. 4. High hardness and good toughness. 5. PP&TPR material, non-slip handle. 6. By using this set of tools, you can remove the small part of your cellphone/computer/Mp4…and repair the device without damaging it. 7. Size:19.8cm x 12.5cm x 4.5cm (box size) 8. Quantity:1pc Specifications: Material: PP & TPR & CR-V steel Hardness: H.R.C. 50-52 Package weight: 690g/1.50lb Package size: 20 x 12 x 4.5cm Package includes: 32 x 6.3mm Diameter CR-V black precision bits 20 x 4mm Diameter CR-V white precision bits 1 x 120mm PP&TPR plastic precision handle 1 x 125mm PP&TPR plastic handle 1 x 125mm Aluminum extension rod 1 x 60mm Fine steel extension rod 2 x 115mm tweezersSKU: n/a
There are no reviews yet.