-10%

YIHUA 3010D DC Power supply


This model has compact design with all metal construction.

1.This unit now features a Dual LED display with highly accurate LED digital readout.

2.Maximum output is 30V at 10A.

  1. High stabilized output voltage.
  2. Short circuit protection.

5.Over loading and current protection.

22,500 25,008

Compare
  • Model: YH-3010D
  • Compact Design
  • All Metal Construction
  • Dual LED Display
  • High Stabilized Output Voltage
  • Short Circuit Protection
  • Over Loading and Current Protection

Category:
Weight 2.5 kg
Dimensions 15 × 15 × 10 cm

Operating Conditions:

Supply power: AC 220-240V, 50Hz/60Hz.

Working Temperature: -10°C ~ 40 °C

Relative Humidity: ‹ 90%

Storage Conditions: -10°C ~ 40 °C

Relative Humidity: ‹ 80%

Stable Voltage

The output voltage is between 0 and nominal value continuously adjustable

Voltage Stability: ≤0.01% +2mV

Load Stability: ≤ 0.01% +2mV

Recovery Time: ≤100µS

Ripple Noise: ≤1 MVRMS(RMS)

Temperature Coefficient: ≤ 200PPM/°C

Stable Current

The output current is between 0 and nominal value continuously adjustable

Power Stability: 0.1% + 3mA

Load Stability: 0.2% + 3mA

Ripple Noise : ≤2mArms(RMS)

Brand

YIHUA

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “YIHUA 3010D DC Power supply”

There are no reviews yet.

  • UT658 DUAL USB Testers

    0 out of 5
    (0)

    Features of UT658 Series USB Testers

    Certifications: CE, UKCA

    ● Type-A/C interface

    ● CE certification

    ● 10 sets of data storage

    ● Loop equivalent resistance measurement (1-480Ω)

    ● Same screen shows voltage, current, power, capacity, etc.

    ● Support fast charge protocol

    SKU: n/a
  • UT207A Digital Clamp Meters (Discontinued)

    0 out of 5
    (0)

    Features of UT207/A to UT209/A Series 1000A Digital Clamp Meters

    Certificates: CE, RoHS

    ● 1000A AC/DC current measurement, 3 times/s sampling rate
    ● Auto/manual ranges selectable (UT207A/UT208A/UT209A)
    ● True RMS (UT207/UT208/UT209/UT209A)
    ● Analog bar graph (UT209)
    ● Inrush current (UT207/UT208)
    ● Zeroing function
    ● Full icon display (UT207/UT208/UT209)
    ● MAX/MIN (UT207/UT208/UT209)
    ● LCD backlight (UT207A/UT208A/UT209A)
    ● Data hold; Duty cycle (except UT209 )
    ● Auto power off and low battery indication
    ● Point contact temperature probe (UT208/UT208A)
    ● Diode; Continuity buzzer; Input Impedance for DCV

    SKU: n/a
  • UNI T Benchtop Digital Multimeter UT8802E

    0 out of 5
    (0)
    1. 20,000 Count EBTN LCD Display
    2. DC Voltage: 200mV/2V/20V/200V/1000V
    3. AC Voltage: 2V/20V/200V/750V
    4. DC Current: 200μA/2mA/20mA/200mA/20A
    5. AC Current: 2mA/20mA/200mA/20A
    6. Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/200MΩ
    7. Capacitance: 20nF/200nF/2μF/20μF/200μF/2mF/20mF/100mF
    8. Frequency: 200Hz~10MHz
    9. Duty cycle: 5%~99%
    10. Frequency response: 1 kHz
    11. USB Interface
    12. Data hold
    13. MAX/MIN
    14. Continuity buzzer
    15. Diode/transistor
    16. test
    17. CAT II 600V
    SKU: n/a
  • UT251A

    0 out of 5
    (0)
    1. 4-digit LCD digital display, 10000 display count

    2. Auto range, 2/s sampling rate
    3. Peaks hold
    4. Store 99 sets of data
    5. RS-232 interface
    6. Data hold
    7. Auto power off
    8. Overload indication, low battery indication
    SKU: n/a
  • UT681C Cable Tester

    0 out of 5
    (0)

    Main Features

    1. Tests Ethernet cables and telephone lines

    2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing

    3. Ethernet cables: Shielded/Unshielded test

    4. Visible LED indication

    5. Automatically check circuit breakage, short circuit and cross circuit

    6. Can toggle between fast and slow speed test modes

    7. Single key operation

    8. Manual/auto power off (after 10-minute inactivity)

    9. Low battery indication

    10. Power supplied by 9V layer-built battery

    SKU: n/a
  • CLAMP METER AC MT 87

    0 out of 5
    (0)
    • ) AC voltage: 450V ( ?1.2% )
    • 3) OHM: 200K? (?1.0%)
    • 4) ACA: 20-400A (?2.0%)
    • 5) Power supply: (AAA) 1.5V?2
    • 6) Data hold: YES
    • 7) Dimension 150L?63W?27.5Hmm

     

    • 1) 3 1/2 digits LCD with a Max. Reading of 1999
    • 2) Diode and Buzzer function
    • 3) Low battery indication
    • 4) Overload protection
    • 5) Data hold for easy reading
    • 1) DC voltage: 600V (?1.0%)
    • 2) AC voltage: 450V ( ?1.2% )
    • 3) OHM: 200K? (?1.0%)
    • 4) ACA: 20-400A (?2.0%)
    • 5) Power supply: (AAA) 1.5V?2
    • 6) Data hold: YES
    • 7) Dimension 150L?63W?27.5Hmm2
    SKU: n/a