- Model: YH-3010D
- Compact Design
- All Metal Construction
- Dual LED Display
- High Stabilized Output Voltage
- Short Circuit Protection
- Over Loading and Current Protection
This model has compact design with all metal construction.
1.This unit now features a Dual LED display with highly accurate LED digital readout.
2.Maximum output is 30V at 10A.
5.Over loading and current protection.
₨22,500 ₨25,008
Weight | 2.5 kg |
---|---|
Dimensions | 15 × 15 × 10 cm |
Operating Conditions:
Supply power: AC 220-240V, 50Hz/60Hz.
Working Temperature: -10°C ~ 40 °C
Relative Humidity: ‹ 90%
Storage Conditions: -10°C ~ 40 °C
Relative Humidity: ‹ 80%
Stable Voltage
The output voltage is between 0 and nominal value continuously adjustable
Voltage Stability: ≤0.01% +2mV
Load Stability: ≤ 0.01% +2mV
Recovery Time: ≤100µS
Ripple Noise: ≤1 MVRMS(RMS)
Temperature Coefficient: ≤ 200PPM/°C
Stable Current
The output current is between 0 and nominal value continuously adjustable
Power Stability: 0.1% + 3mA
Load Stability: 0.2% + 3mA
Ripple Noise : ≤2mArms(RMS)
Specifications | UT622A | UT622C | UT622E |
Certificates | CE, RoHS | ||
Test frequency | 100Hz, 120Hz, 1kHz, 10kHz | 100Hz, 120Hz, 1kHz, 10kHz, 100kHz | 100Hz, 120Hz, 1kHz, 10kHz, 100kHz |
Test signal level | 0.1Vrms, 0.3Vrms, 1Vrms | ||
Output impedance | 100Ω | ||
Measurement parameters | Primary: L/C/R/Z Secondary: D/Q/θ/ESR |
Primary: L/C/R/Z/DCR Secondary: D/Q/θ/ESR | |
Auto LCR | √ | ||
Test terminals | Three-terminal test jacks, five-terminal test sockets | ||
Test rate | Fast (20 times/s), medium (5 times/s), or slow (2 times/s) | ||
DCR test rate | — | — | Fast (20 times/s), medium (5 times/s), or slow (2 times/s) |
Ranging mode | Auto/hold | ||
Tolerance range | 1%~20% | ||
Testing circuit mode | Series/parallel mode | ||
Clearing correction | Open/short circuit | ||
Fuse of test ports | 0.1A/250V | ||
Communication interface | Mini-USB | ||
LED alarm for tolerance (pass: green; fail: red) |
√ | √ | √ |
Display range | |||
Maximum reading | 99999 | ||
Minimum resolution | 0.0001 | ||
Maximum accuracy | 0.001 | ||
L | 0.00μH~99.999H | ||
C | 0.00pF~99.999mF | ||
Z/R | 0.0000Ω~9.9999MΩ | ||
ESR | 0.0000Ω~999.99Ω | ||
D | 0.0000~9.9999 | ||
Q | 0.0000~99999 | ||
θ | -179.9°~179.9° | ||
DCR | — | — | 0.01mΩ–20.000MΩ |
Temperature coefficient | 0.1× (specified accuracy) /°C (0°C~18°C or 28°C~40°C) | ||
General Characteristics | |||
Power | 3.7V 1800mAh lithium polymer battery; Input: 220V (1±10%), 50Hz (1±5%); Mini-USB output: 5V, 1A | ||
Display | 2.8′ TFT LCD 320X240 | ||
Product net weight | 420g | ||
Product size | 93mm x 192mm x 44mm | ||
Standard accessories | Short circuit board (UTR-001), USB cable, 5V 1A power adapter, Four-terminal Kelvin testleads (UTR-L100k-H) (UT622C/E), Alligator clip test leads with rubber plugs (UTR-002)(UT622A), English manual |
There are no reviews yet.