-8%

ANALOG METER DE 360


Features Of Analog Multimeter DE360TRN:

  • Tests AC voltage, DC voltage, DC current, resistance, continuity and batteries.
  • 20kOhm/V DC sensitivity.
  • Mirrored scale.
  • With fuse overload protection circuitry incorporated.
  • Easy to read, colour-coded analogue displays.
  • Manual range selection.
  • Pocket-sized analogue tester.

1,700 1,853

Compare

Analog Multimeter DE360TRN

Analog Multimeter DE360TRN is easy to read, colour-coded analogue displays. Analog meter DE360TRN, you can use it to measure AC/DC voltage, DC current, resistance, diode check, continuity and transistor leak current, for DC current. This meter can measure as low as 10 microamps and up to 250 mA, which is hard to do with a digital multimeter. The acts as an ammeter with low series resistance to measure direct current. For measuring high current, we connect a shunt resistor across the galvanometer so that the current through the galvanometer does not cross its maximum allowed value. Here, a significant portion of the current to be measured bypasses through the shunt. With that shunt resistance, an analogue multimeter can measure even milli-ammeter or ammeter ranges of current.

Category:

Specifications Of Analog Meter DE360TRN Analog Ohmmeter:

  1. DCV: 0 – 0.1V ±1% 0.25V/2.5/10V/50V/250/1000 ±3%
  2. ACV: 0 -10/50/250/1000V ±4%
  3. DCA: 0 – 50µA/2.5mA/25mA/250mA ±3%
  4. Resistance: 0 – 2K/20K/200K/2M/20Mohm ±3% *dB: -10 dB – 22 dB
  5. Light: Diode check (including LED)
  6. Continuity: both Buzzer & flash
  7. Transistor leak current Features: All range fused
  8. Compact size
  9. Tilt back-stand
  10. Continuity flash
  11. 0-ohm adjustment

Brand

China Brand

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ANALOG METER DE 360”

There are no reviews yet.

  • UT210E ACA DCA Digital Clamp Meters

    0 out of 5
    (0)

    Main Features

    1. Auto range, 2~3/s sampling rate

    2. True RMS measurement

    3. VFC, frequency conversion function

    4. NCV, Non-Contact Voltage testing function:induce electric field strength via the jaw

    5. Zero mode

    6. LCD backlight, data hold

    7. Auto power off, low battery indication and overload protection

    8. Comfortable to hold and easy to carry with (Product weight: 160g/170g)

    9. Complies with CE (European Union) directives

    SKU: n/a
  • YH N3H 7CM NOSLE

    0 out of 5
    (0)
    SKU: n/a
  • UT231 Digital Power Clamp Meters

    0 out of 5
    (0)

    UT 230 series is a handheld intelligent power clamp meter, which combines with digital current meter and power meter. It is equipped with powerful measurement and data processing software, which can help complete measurements, calculations and displays of voltage, current, active power, power factor, phase angle, apparent power, reactive power, power, frequency, temperature and other parameters.

    SKU: n/a
  • UT681HDMI Cable Tester

    0 out of 5
    (0)

    1. Tests HDMI/MINI-HDMI cables

    2. Fastline collocation type: A with A, A with C and C with C

    3. Checks circuit breakage, short circuit, cross circuit and the missing wire

    4. 20 visible LED indicators

    5. Can toggle between scan and full display test modes

    6. Single key operation

    7. Manual/auto power off (after 10-minute inactivity)

    8. Low battery indication

    9. CE certification

    10. Power supplied by 9V layer-built battery

    SKU: n/a
  • UT501A Insulation Resistance Tester

    0 out of 5
    (0)

    1. 2000 count LCD display, overload indication, backlight

    2. AC voltage measurement, auto power off
    3. Auto discharge
    4. Continuous measurements mode, red warning light and buzzer function
    SKU: n/a