-8%

ANALOG METER DE 360


Features Of Analog Multimeter DE360TRN:

  • Tests AC voltage, DC voltage, DC current, resistance, continuity and batteries.
  • 20kOhm/V DC sensitivity.
  • Mirrored scale.
  • With fuse overload protection circuitry incorporated.
  • Easy to read, colour-coded analogue displays.
  • Manual range selection.
  • Pocket-sized analogue tester.

1,700 1,853

Compare

Analog Multimeter DE360TRN

Analog Multimeter DE360TRN is easy to read, colour-coded analogue displays. Analog meter DE360TRN, you can use it to measure AC/DC voltage, DC current, resistance, diode check, continuity and transistor leak current, for DC current. This meter can measure as low as 10 microamps and up to 250 mA, which is hard to do with a digital multimeter. The acts as an ammeter with low series resistance to measure direct current. For measuring high current, we connect a shunt resistor across the galvanometer so that the current through the galvanometer does not cross its maximum allowed value. Here, a significant portion of the current to be measured bypasses through the shunt. With that shunt resistance, an analogue multimeter can measure even milli-ammeter or ammeter ranges of current.

Category:

Specifications Of Analog Meter DE360TRN Analog Ohmmeter:

  1. DCV: 0 – 0.1V ±1% 0.25V/2.5/10V/50V/250/1000 ±3%
  2. ACV: 0 -10/50/250/1000V ±4%
  3. DCA: 0 – 50µA/2.5mA/25mA/250mA ±3%
  4. Resistance: 0 – 2K/20K/200K/2M/20Mohm ±3% *dB: -10 dB – 22 dB
  5. Light: Diode check (including LED)
  6. Continuity: both Buzzer & flash
  7. Transistor leak current Features: All range fused
  8. Compact size
  9. Tilt back-stand
  10. Continuity flash
  11. 0-ohm adjustment

Brand

China Brand

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ANALOG METER DE 360”

There are no reviews yet.

  • Insulation Resistance Testers UT513A

    0 out of 5
    (0)

    UT510 series is a kind of intelligent insulation tester. The device circuit design takes microcomputer technology design as the core and combines the large scale integrated circuit with digit circuit. It is equipped with strong measuring software and data processing software. It is applied to the parameter measurement of insulation resistance, voltage and low resistance. It has stable performance and simple operation. It is applicable to on-site measurement and repair of the electrical equipment and charging line. It is the ideal tool of maintaining electrical equipment. It is also used for smelting, communication, manufacture, fossil oil, national defense, electricity, chemical industry and circuit.

    SKU: n/a
  • UT701 Single Function Temperature Calibrator

    0 out of 5
    (0)
    SKU: n/a
  • KT-80 Thermal Imager

    0 out of 5
    (0)

    Features and benefits of  Sonel KT:

    • Friendly UI, easy to use without training,
    • Affordable as entry level diagnostic tool,
    • Removable large capacity Li-ion battery,
    • 4 hour working time,
    • 3,5’’ large screen with no image cropping, high brightness screen to show image with no detailed information lost even outdoor or in highlight,
    • Rugged and compact design, metal internal structure,
    • Standard Micro USB interface for data transmission and charging,
    • Wi-Fi connection (Optional).
    SKU: n/a
  • UNI-T MSO3152E 150MHz Mixed Signal 2 Channel Digital Oscilloscope

    0 out of 5
    (0)
    Analog bandwidth 150MHz 250MHz
    Channels 2+16 digital 4+16 digital 2+16 digital 4+ 16digital
    Sampling rate (Analog) 2.5GS/s (Single channel), 1.25GS/s (Dual channels)
    Sampling rate (Digital) 1.25GS/s (Eight channels), 625MS/s(Sixteen channels)
    Memory depth 70Mpts
    Waveform capture rate 200,000wfms/s
    Time base scale 2ns/div~50s/div (Real-time sampling rate, memory depth display )
    Time base scale (digital) 2ns/div~40S/div[Step by 1-2-4 stall]
    Input impedance (1MΩ±1%) II (20pF±3pF)
    Input impedance digital (101kΩ±1%) II (9pF±1pF)
    Vertical scale 1mV/div~20 V/div (1 MΩ)
    DC gain accuracy <5mV: ±3%, ≥5mV: ±2%
    Waveform record 100,000 frames
    Trigger types Edge, Runt, Window, Nth Edge, Delay, Overtime, Duration, Setup/Hold, Pulse Width, Slop, Video, Code; RS232/UART, I2C, SPI, USB,
    CAN, LIN, FlexRay
    Bus decode RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay
    Waveform operations A+B, A-B, A×B, A/B, FFT, editable advanced and logical operations
     

     

    Auto measurements

    Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, CycRMS, Period, Freq, Rise, Fall, RiseDelay, FallDelay, +Width,
    -Width, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 parameters in totaldigital
    channel: Freq, Period, +Width, -Width, +Duty, -Duty, RiseDelay A→B,FallDelay A→B, Phase A→B, Phase B→A
    Measurement display 5 types
    Measurement statistics Average, Max, Min, standard deviation and number of measurements
    Frequency counter 6 bits
    Standard interfaces USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), AWG,UT-M15 logic analyzer probe, VGA
     

     

    Standard Accessories

    USB interface cable UT-D14
    Passive Probe x 2/4 (1 x , 10 x switchable,300MHz,) UT-P06
    Passive Probe x 2/4 (1 x , 10 x switchable,200MHz,) UT-P05
    16CH Logic analyzer probe UT-15M

     

    SKU: n/a
  • UNI-T UT276A+ Auto Range Digital Clamp Earth Ground Tester

    0 out of 5
    (0)

    ● Auto range
    ● Data hold
    ● Data recall
    ● LCD backlight
    ● Resistance limit alarm
    ● Low battery indication
    ● Auto calibration

    SKU: n/a
  • MECHANIC lead-free ESD soldering tip 900M-T-K

    0 out of 5
    (0)

    MECHANIC lead-free ESD soldering tip 900M-T-K

    High precision, no oxygen copper, anti-static, long service life

    SKU: n/a