-14%

ANALOG MULTIMETER DEG 360


1,400 1,635

Compare

Greenfield 360 Analog Multimeter

Product Description

A multimeter or a multitester, also known as a volt/ohm meter or VOM, is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter may include features such as the ability to measure voltage, current and resistance. Multimeters may use analog or digital circuits—analog multimeters and digital multimeters (often abbreviated DMM or DVOM.) Analog instruments are usually based on a microammeter whose pointer moves over a scale calibration for all the different measurements that can be made; digital instruments usually display digits, but may display a bar of a length proportional to the quantity measured. A multimeter can be a hand-held device useful for basic fault finding and field service work or a bench instrument which can measure to a very high degree of accuracy. They can be used to troubleshoot electrical problems in a wide array of industrial and household devices such as electronic equipment, motor controls, domestic appliances, power supplies, and wiring systems.

Category:

Brand

China Brand

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ANALOG MULTIMETER DEG 360”

There are no reviews yet.

  • CMM-11 Multimeter

    0 out of 5
    (0)
    • manual and automatic range selection
    • HOLD function for holding measured values
    • MAX/MIN” function for displaying extreme values
    • compact housing  – allows to store the device in a pocket
    • increased resistance to falls from heights above 2 m thanks to the elastomer coating
    • built-in Bluetooth module for data transfer to mobile devices
    • built-in flashlight for lighting the measuring places
    • Beeper for sound signal circuit continuity
    • Auto-OFF function for automatic switching off of the unused device
    • display 3¾ digit (count max 4000)
    SKU: n/a
  • SOLDERING IRON ON/OFF 60W

    0 out of 5
    (0)

    caution;

    our real products may be differ from the given images

    SKU: n/a
  • TDR-420 Time Domain Reflectometer/ Cable Fault Locator

    0 out of 5
    (0)

    Product features

    • Possibility damage-free location of impedance changes of tested cables and wires such as:
      • shorted conductor,
      • open conductor / end of cable – useful during the inventory of warehouses and stores,
      • splice,
      • splitter,
      • water ingress,
      • wet splice,
      • bridge tap
      • or other changes.
    • Single measurement mode ONCE,
    • Continuously measurement mode CONT,
    • Tone signal generator TONE,
    • Two cursors to mark two places of damage along with an indication of the distance between them,
    • Built-in HELP function for easier interpretation of the reflectogram,
    • 11 available measuring ranges from 7 m to 6000 m,
    • „dead zone” limited to 0.6 m,
    • Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
    • manually set of sensitivity in 8 steps GAIN,
    • output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
    • Velocity of Propagation set in range from 10% to 99%,
    • tight and durable housing with IP67 ingress protection degree.
    • Small size and weight.
    SKU: n/a