- Sleek Design Silver Metal Body
- Easy To Use
- Convenient portable size and easy-to-read scales
- Tests batteries on or off the car in just 10 seconds
- Determines good/bad status with an extra-large display with zero adjust
- Determines state-of-charge cranking and charging volts
- Works on both 6 Volts and 12 volts batteries
Battery Load Tester – BT 100A
-
Sleek Design Silver Metal Body
- Easy To Use
- Convenient portable size and easy-to-read scales
- Tests batteries on or off the car in just 10 seconds
- Determines good/bad status with an extra-large display with zero adjust
- Determines state-of-charge cranking and charging volts
- Works on both 6 Volts and 12 volts batteries
₨5,264 ₨5,923
Weight | 0.7 kg |
---|---|
Dimensions | 14 × 7 × 5 cm |
TITAN BATTERY TESTER BT 100 A CAN BE USED TO TEST 6V AND 12 BATTERY SYSTEMS.IT CAN GENERATE LOAD JUNK LOAD UPTO 90A DC.UPTO 200A BATTERIES CAN BE TESTED.
1 x BT 100 A
1 x MANUAL
Based on 0 reviews
Be the first to review “Battery Load Tester – BT 100A”
-
Clamp Meters
AC DIGITAL CLAMP METER KEW 2117R
AC DIGITAL CLAMP METER KEW 2117R
• Fully Safety jaw
• Ergonomic over-molded body gives convenient one-hand operation
• Large easy-to-read display with 0.01A resolution
• Accurate reading with True RMS
60/600/1000A auto-ranging
• Long battery life
• Safety Standard
IEC 61010-1 CAT IV 300V / CAT III 600VSKU: n/a -
Digital Multi Meter
ET 8133 DMM
Product description
3 times/second
Diode: YES
Capacitance: YES
True RMS: YES
Data hold: YES
Backlight: YES
Flashlight: YES
Auto power off: YES (no measurement operation within 15 minutes)
Low battery indication: YES
Environment temperature: 0~40℃, humidity <75%
Storage environment: -20~60℃, humidity <80%
DC voltage:
Range: 200mV/2.000V/20.00V/200.0V/600V
Resolution: 0.0001V/0.001V/0.01V/0.1V/1V
Accuracy: ±(0.5%+3)
Max.: 600V
AC voltage:
Range: 2.000V/20.00V/200.0V/600V
Resolution: 0.001V/0.01V/0.1V/1V
Accuracy: ±(1.0%+3)
Max.: 600V
Capacitance:
Range: 20.00nF/200.0nF/2.000F/200.0F
Resolution: 0.01nF/0.1nF/10nF/100nF
Accuracy: ±5%+3
Max.: 200μF
AC current:
Range: 20mA/200mA, 2A, 10A
Resolution: 0.1mA/0.001A/0.01A
Accuracy:
20mA/200mA/2A: ±(1.0%+3)
10A: ±(1.5%+3)
Max.:
20mA/200mA: 200mA
2A/10A: 10A
DC current:
Range: 20mA/200mA, 2A, 10A
Resolution: 0.1mA/0.001A/0.01A
Accuracy:
20mA/200mA: ±(2.0%+4)
2A: ±(1.0%+5)
10A: ±(2.0%+3)
Max.:
20mA/200mA: 200mA
2A/10A: 10A
Resistance:
Range: 2.000KΩ/20.00KΩ/200.0KΩ/2.000MΩ/20.00MΩ
Resolution: 0.001KΩ/0.01KΩ/0.1KΩ/0.001MΩ/0.01MΩ
Accuracy:
2.000KΩ: ±(1.5%+3)
20.00KΩ: ±(0.5%+3)
200.0KΩ: ±(0.5%+3)
2.000MΩ: ±(1.0%+3)
20.00MΩ: ±(1.5%+3)
Max.: 20MΩ
Continuity: YES
NCV: YES
Frequency response in AC mode: 40Hz~1KHz
LCD size: 45 * 25mm / 1.8 * 1.0in
Item size: 124 * 65 * 26mm / 4.9 * 2.6 * 1.0in
Item weight: 210g / 7.4ounce
Package size: 140 * 100 * 40mm / 5.5 * 3.9 * 1.6in
Package weight: 220g / 7.8ounceSKU: n/a -
Multimeters
UT195M Professional Digital Multimeter
Features
1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V
2. Large 6000-count LCD screen
3. True RMS
4. ACV 750V 5kHz bandwidth
5. Flashlight
6. Auto LCD backlight controlled by light sensor (can be turned off)
7. LoZ voltage test, for ghost voltage measurement
8. Motor phase sequence measurement with 2 probes
9. 20A current measurement (max 30 seconds)
SKU: n/a -
There are no reviews yet.