-29%

Battery Load Tester – BT 100D

Availability:

7 in stock


  • 100 Amp Digital Battery Load Tester
  • Microprocessor Control–makes for an easy and accurate load test with no need to time yourself
  • Bright, LED Digital Display–indicates both voltage and test results
  • Unique 3-Step Design–LED polarity check function, battery load test and charging system test readout
  • Super-Grip Battery Clamps–heavy-duty and color-coded
  • Baked Enamel, Steel Case–ventilated to keep cool
  • Rubber Insulated Carrying Handle–for comfort and safety
  • Checks both Battery and Charging System

5,000 7,000

7 in stock

Compare

The BT-100D 100+ Amp Digital Battery Load Tester is microprocessor controlled. It makes for an easy and accurate load test with no need to time yourself to get accurate results. Bright, LED Digital Display indicates both voltage and test results. A unique 3-Step Design provides LED polarity check function, battery load test and charging system test readout. Automatically Turns Off the Load after 10 seconds and locks the voltage. Super-Grip Battery Clamps are heavy-duty and color-coded. Baked Enamel, Steel Case to keep cool. Rubber Insulated Carrying Handle–for comfort and safety. Checks both Battery and Charging System.

Category: Tag:
Weight 0.7 kg
Dimensions 15 × 8 × 6 cm

12 Volt Battery Analysis

Press “START TEST” & wait for 10 seconds.
Once automatic test cycle is completed, your test results will be:

1.
 GREEN LIGHT = OK):
Battery capacity is good. May or may not be fully charged.
Determine state of charge by checking specific gravity (use hydrometer). If gravity is less than full charge, check for possible charging system trouble or electrical drain. Recharge battery to fully charged level.

2. GREEN + YELLOW LIGHT = OK BUT WEAK):
Review the load test result with the comparison chart on the tester cover to see if this battery is “OK” or not. If it is “OK”, go up to 1ST “OK” state. If it is not, go down to 3rd “WEAK” state.

3. YELLOW LIGHT = WEAK):
Battery capacity is unsatisfactory. Battery may be either: (1) defective or (2) partially discharged. To determine which, check specific gravity. If gravity is over 1.225, battery is considered defective. If gravity is under 1.225, recharge battery and re-test. If cell-to-cell gravity varies more than 0.025 (25 points), cell trouble may exist. If charging does not bring gravity to fully charged level, the battery is either sulfated or has lost active material.

4. RED LIGHT = BAD):
Battery may be defective (e.g. a bad cell).

NOTE: If pre-test battery voltage is below 12.3V, tester will not allow and should not perform the load test. Please fully charge battery and retest.

Brand

TITAN

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Battery Load Tester – BT 100D”

There are no reviews yet.

  • UTi165A Thermal Imager UNI-T

    0 out of 5
    (0)
    Specifications
    Model UTi165A
    IR resolution 160×120 pixels
    Field of view (FOV) 56°×42°
    Thermal sensitivity (NETD) ≤150mk (0.15℃)
    Temperature range  -10~400℃
    Spatial resolution (IFOV) 11mrad
    Frame rate <9Hz
    Measurement accuracy ±2℃ or ±2% whichever is greater
    Focus Focus free
    Display modes Thermal
    Display 2.8”LCD
    Auto capture of Hi/Lotemperature
    Measurement modes
    WIFI
    PC analysis software
    Drop proof 2m
    IP rating IP65
    General Characteristics
    Power Li-ion battery (3.7V 5000mAh)
    Product color Red and grey
    Product net weight 455g
    Product size 236mm x 75.5 mm x 86mm
    Standard accessories micro USB cable, micro SD card, Type-C USB cable
    Standard individual packing Blister, gift box, English manual
    Standard quantity per carton 5pcs
    Standard carton measurement 650mm x 355 mm x 180mm
    Standard carton gross weight About 5kg
    SKU: n/a
  • UT396B Professional Laser Distance Meter

    0 out of 5
    (0)

    UT396 series are professional laser distance meters with color LCD display, electronic multi-axis leveler, real-time camera display on target object, and other special features. Its unique operating system, friendly user interface, and personalized settings option all make these devices the perfect choice for professional distance measurement.

    SKU: n/a
  • UT107 Handheld Automotive Multi-Purpose Meters

    0 out of 5
    (0)

    Main Features

    1. Dwell angle measurement (DWELL)

    2. Tach measurement (RPM)

    3. Data hold

    4.12V battery test, duty ratio measurement

    5. Measurement input port prompt

    6. Low battery, auto polarity and over-range indication

    7. Complies with CE (European Union) directives

    SKU: n/a
  • UT675A Battery Testers

    0 out of 5
    (0)

    Features of UT675A Battery Testers

    Certifications: CE, UKCA, FCC

    ● 12V cranking lead acid battery test

    ● 12/24V charging or cranking system test
    ● Display battery capacity, voltage, resistance and life
    ● Four-termina Kelvin test
    ● 10 types of battery standards
    ● Language option (Chinese/English)
    ● Test without battery disassembly
    ● LED color indication for test result (UT673A)
    ● Print on-line and real-time test reports (UT675A)
    ● USB data transfer (UT675A)
    SKU: n/a
  • CLAMP METER AC BM 2000B

    0 out of 5
    (0)

    SPECIFICATIONS:

    – Maximum display: 1999
    – Method indication: LCD
    – Maximum arm span: 60mm
    – Operating temperature range:
    work: 0C – 40C
    Storage:-10C – 60C
    – Power supply: 9V battery
    – Low battery indication: YES, graphic symbol
    – Audible indication: YES, piezoelectric transducer
    – Dimensions: 270x100x45 mm
    – Weight: about 610g (with battery)

    Features
    – Measuring voltage: 0-1000V 2 range
    – Measurement of AC voltage: 0-700V in 1 range
    – Measurement of alternating current: 200A-2000A in 2 ranges
    – Measuring current: 200A-2000A in 2 ranges
    – Measurement of resistance: 2k in 1 range
    – Measuring capacity: NO
    – Frequency: NO
    – Temperature measurement: NO
    – Testing LEDs: YES
    – Acoustic continuity tester: YES
    – Distance between arms: 6cm
    – Meter dimensions: 270x100x45 mm
    – Weight: 610g with battery
    – Basic accuracy: ± (0.5% +2 digits)

    Packages Include:

    1 × Clamp-On Meter BM-2000B

    An internal link is any link from one page on your website to another page on your website. Both your users and search engines use links to find content on your website. Your users use links to navigate through your site and to find the content they want to find. Search engines also use links to navigate your site. They won’t find a page if there are no links to it. There are several types of internal links. In addition to links on your homepage,mean post feed, etc, you can also add links within your content. We call those contextual links. Contextual links point your users to interesting and related content.
    SKU: n/a
  • ,

    JM-B01 Professional Orange & Black Tool Bag

    0 out of 5
    (0)

    Assembly and repairing of household appliances, elevator and other large mechanical, the equipment of broadband and the building construction.

    SKU: n/a