- clamp multimeter
- Performs AC/DC Voltage, AC current, Resistance, Audible Continuity, Diode
- Temperature Measurements, and non-contact ACV Detect (NCV) as well as Capacitance, Hz, etc.
- Auto Ranging DMM with AC current clamp meter function
Clamp Meters
Clamp Meter DT 3266
Availability:
Out of stock
- clamp multimeter
- Performs AC/DC Voltage, AC current, Resistance, Audible Continuity, Diode
- Temperature Measurements, and non-contact ACV Detect (NCV) as well as Capacitance, Hz, etc.
- Auto Ranging DMM with AC current clamp meter function
₨811 ₨1,308
Out of stock
CompareWeight | 0.3 kg |
---|---|
Dimensions | 15 × 7 × 4 cm |
FUNCTION | MEASURING RANGE | ACCURACY | ||
DCV | 200mv/2v/20v/200v | ±(0.8%+2) | ||
600v | ±(1.0%+2) | |||
400mv/4v/40v/400v | ±(0.8%+2) | |||
600v | ±(1.0%+2) | |||
ACV | 2V/20V/200V | ±(1.0%+5) | ||
600V | ±(1.2%+5) | |||
400mv/4v/40v/400v | ±(1.0%+10) | |||
600V | ±(1.2%+10) | |||
ACA | 2A/20A | ±(3.0%+10) | ||
200A | ±(2.5%+10) | |||
4A/40A/400A | ±(2.5%+10) | |||
600A | ±(1.5%+5) | |||
Ω | 200Ω/2KΩ/20KΩ/200KΩ/2MΩ | ±(1.2%+2) | ||
20MΩ | ±(2.0%+5) | |||
400Ω/4KΩ/40KΩ/400KΩ/4MΩ | ±(1.2%+2) | |||
40MΩ | ±(2.0%+5) | |||
CX | 200uf | ±(4.0%+10) | ||
HZ | 0∞10MHZ | ±(2.0%+5) | ±(1.5%+15) | |
°C | – 20°C ≤ 750°C | ±(2%+2) | ||
FEATURE | ||||
LCD | DIGITS | 1999 | 3999 | |
Clamp Size | Opening | 30mm | 30mm | |
Test Range | Ac voltage/dc voltage/AC-DC current,resistance | • | • | |
Capacitance/frequency/duty cycle/temperature | • | |||
Power | 3X1.5v AAA | |||
Weight | 133.5g | |||
Security | CE,ETL,CATIII 600V ROHS |
Based on 1 review
Add a review
-
Insulation Tester
UT502A Insulation Resistance Tester
1. 2000 count LCD display, overload indication, backlight
2. AC voltage measurement, auto power off3. Auto discharge4. Continuous measurements mode, red warning light and buzzer function5. Continuous low resistance measurement6. PI and DAR measurement, auto resistivity calculation7. Low resistance returning to zero function to improve accuracySKU: n/a -
Multimeters
CMM-10 Multimeter
- Autoranging/manual range selection.
- DATA HOLD function, for holding measured values.
- REL function, which allows you to make measurements relative to a stored reference value.
- Continuity test with acoustic signalling (beeper).
- AUTO-OFF function.
- Display 3 7/8 digits (5000 max).
SKU: n/a -
Temperature and Humidity Meter
UNI-T UT332+ Digital Temperature Humidity Meter
1. Features of UT332+ Temperature Humidity Meter
● ℃/℉ selection
● Response time: around 1 second● Humidity offset settings● Temperature offset settings● Dew point offset settings● Wet-bulb temperature offset settings● Auto power off● Data hold/data recall● MAX/MIN● Auto record time setup● LCD backlight● USB interface for data and powerSKU: n/a -
Zafar Ayyub –
Dt3266 clampmeter
Zafar Ayyub –