TITAN 266 Digital Clamp Meter 500V Insulation Tester
DC voltage: 1000V ? (0.8% + 2)
AC voltage: 750V ? (1.2% + 4)
Alternating current: 200A / 1000A ? (2.5% + 5)
Resistance: 200? / 20k? ? (1.0% + 2)
Insulation test 100k? to 2000M? (with option 500V insulation tester unit)
High Resistance: 20M? / 2000M? ? (5.0% + 2)
The continuity of the alarm
Low screen voltage
Data retention
Input impedance: 10M?
Sampling rate: 3 times / s
Maximum display: 1999
Jaw opening: 50mm
Power: 9V battery (6F22)
Brand
China Brand
Based on 0 reviews
Be the first to review “TITAN 266 Digital Clamp Meter”
-
Clamp Meters
CLAMP METER AC BM 5268
BM5268 AC Digital Clamp meter Technical parameters Functions Range Accuracy BM5268 DC Voltage 400mV/4V/40V/400V/600V ±(0.8%+2) AC Voltage 4/40/400/600V ±(1.2%+5) AC Current 4/40/400/600A ±(2%+10) Ω Resistance 400/4K/40K/400K/4M/40MΩ ±(1%+3) Capacitance 10n/100n/1μ/10μ/100μ/1m/10mF ±(3%+5) Frequency 10/100/1K/10K/100K/1M/30MHz ±(0.5%+3) ºC/ºF -50ºC~1000ºC ±(1%+5) -58ºF~1832ºF ±(1.2%+6) Functions Range Accuracy True RMS √ Manual range √ Automatic range √ Auto power OFF About 10minutes √ Auto power OFF/Manually turn it off √ Diode Test √ VHZ voltage measuring frequency √ Phase line recognition √ Continuity Testing √ Data hold √ INR Surge voltage √ low Battery indication √ Overload protection √ Greatest display 1999 √ Jaw Size Φ30mm General Features Power DC9V(6F22)Battery Color Gray+Red Weight About 220g Size 195×64×35mm Standard accessories Multimeter leads+Batteries+Temperature Sensor Standard Pack Color Box,User Manua Safety rating EN61010-1,CAT.II 600V SKU: n/a -
Power Quality Analyzer
UT283A Single Phase Power Quality Analyzer
1. Trend/event capture
2. Harmonics/inrush current measurement3. File management through USB interface4. Flick measure (PST/PLT values)5. User friendly interface6. Multimeter functions7. Scope functions including waveform display8. 3.5 inches 64K color TFT LCD display9. THD (Total Harmonic Distortion) function10.Long-term monitoringSKU: n/a -
Power Quality Analyzer
PQM-707 Power Quality Analyzer
-
Features:
- 7″ touch screen – intuitive operating
- CAT IV 600V – high safety
- all parameters acc. to class S – high accuracy of measurements
- Li-Ion rechargeable battery – higher mobility
- removable memory card – recording data with no restrictions
Possible measurements:
- Measurements according to EN 50160,
- Voltage L1, L2, L3, N-PE (five inputs),
– average, minimum, maximum values, range to 760 V, ability to work with voltage transformers, - Current L1, L2, L3, N (four inputs),
– average, minimum, maximum values, measurement current with range to 3 kA (depends on used clamp), ability to work with current transformers, - Crest factor for voltage and current,
- Frequency from 40 Hz to 70 Hz ,
- Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive),
- Power recording:
- Budeanu method,
- IEEE 1459,
- Active, reactive, apparent energy,
- Power factor, cosφ, tgφ,
- Up to 50th harmonics for voltage and current,
- Total Harmonic Distortion (THD) for voltage and current,
- Short-term (PST) and long-term (PLT) flicker,
- Unbalance of voltage and current,
- Current and voltage events registration including waveforms and RMS graphs half period,
- Inrush current
- Calculator of energy tariffs
- ANALYZER MEASURES AND RECORDS ACCORDING TO THE IEC 61000-4-30 CLASS S STANDARD.
SKU: n/a -
There are no reviews yet.