-
×
UT221 2000A ACA DCA Digital Clamp Meters
- Vendor:
superworld
Subtotal: ₨42,000
-22%
- GENERAL INTRODUCTION:Model 55 adopted scale integrated circuit and distinctive function transferring circuit. This clamp meter measures DC/AC Voltage, AC/IDC Current, Resistance.GENERAL FEATURES:Maximum Display: 1999 automatic polarity displayTesting method: double integrals A/D converterSampling rate: twice per secondOverload Indication: only appeared on the top positionMax common mode voltage: 500V DC/AC valid valueOperating Temperature/Humidity OºC to 40ºC < 80% RHStorage Temperature/Humidity 10Cto 50C e85% RHPower supply: Battery type: two 7 batteries (AAA)Low Voltage Indication: “+ -“Static electric current: about 2mAJaw split size: 32mm, jaw inner diameter 30mmDimensions: 160mm x 63mm x 23mmWeight: 120g (including battery. (LxWxH) approx.)
Brand
TITAN
Based on 0 reviews
Be the first to review “TITAN TN55 DIGITAL CLAMP METER”
-
Clamp Meters
UT201+ ACA Digital Clamp Meters
1. Auto range and 3/s sampling rate
2. Data hold
3. Max value hold
4. Auto power off
5. Low battery prompt, over-range prompt and auto polarity display
6. Comfortable tohold and easy to carry with (Product weight: 220g)
7. 1m drop proof
8. Complies with Double Insulationand Over Voltage standards of CAT II 600V, CAT III 300V and Pollution Degree 2
9. Complies with CE (European Union) directives
SKU: n/a -
LCR Meter
UT620 Series Digital Micro Ohm Meters
UT620 series are used to measure DC low resistance through 4-wire method. Some of its features are: Comparison function to determine if the device is in good condition, unknown wire length calculation (FT/M); two-way data transmission by USB interface; built-in rechargeable lithium battery. UT620 can be used in narrow space for on-site troubleshooting, such as metal coating resistance/motor and small transformer winding resistance measurement, earth system joints/welding points/power distribution cabinet bus and lead connection inspection and more.
SKU: UN62B0TUOM -
Multimeters
UT58B General Digital Multimeter
1. 2000 display count, refresh rate 2~3 times/s
2. Function symbols and test lead connection indication3. Transistor measurement4. Temperature measurement mode, with K-type temperature probe5. Diode and continuity buzzer; auto power off； overload protection6. Data hold; 20A AC/DC current measurementSKU: n/a -
Process Celibrators
UT715 Multifunction Loop Process Calibrator
Features of UT715 Multifunction Loop Process Calibrator
Certifications: CE, UKCA
● Step/ramp functions
● Source and measure accuracy up to 0.02%● Rechargeable battery● Contrast adjustment● Auto power off (Time adjustable)● Stores and recalls setups● USB communication● Provides 24V loop power to transmitter while conducting mA current measurement at the same timeSKU: n/a
Related products
-
Clamp Meters
UT-CS09A Flex Clamp Sensor
Specifications Range UT-CS09A AC current (A) 30A/300A/3000A ±(3%+5) Frequency response (Hz) 45Hz~500Hz √ Features Flex clamp size UT-CS09A: 25.4cm (10 inches); UT-CS09C: 45.7cm (18 inches) Operating temperature 0℃~50℃ Storage temperature -20°C~60°C Storage humidity ≤80%RH Low battery indication About 3.3V Range selection Manual General Characterisitics Power 1.5V battery (R03) x 3 Product color Red and grey Product net weight 260g Product size 267mm x 119.4mm x 34mm Standard accessories Batteries, BNC adapter Standard individual packing Blister, English manual Standard quantity per carton 10pcs Standard carton measurement 495mm x 405mm x 225mm Standard carton gross weight 7kg SKU: n/a -
Clamp Meters
UT219M ACA Professional Clamp Meters with Motor Test
- UT-219 professional clamp meter series is three-proofing digital clamp meter specially designed for professional industrial users.
- The industrial design of this series is rugged and durable, and capable of withstanding the impact from 2 meters fall-down.
- The waterproof rating is up to IP54; therefore, it can be used in environment with water splashing or much more dust. The whole series is configured with LoZ (Low Impedance Input) AC voltage tap position, which is capable of testing the false voltage; auto backlight function can be used continuously under the circumstance of emergency power outage. UT-219M is also provided with MOTOR test function, allowing to directly test the phase sequence of three phase AC motor by means of the probe. UT-219 series is much more in compliance with CAT IV 600V safety level, and certified by the German GS institution.
SKU: n/a -
Clamp Meters
UT 208 CLAMP METER
1. 1000A AC/DC current measurement, 3 times/s sampling rate
2. True RMS3. Inrush current4. Zeroing function5. Full icon display6. MAX/MIN7. Data hold; Duty cycle8. Auto power off and low battery indication9. Point contact temperature probe10. Diode; Continuity buzzer; Input Impedance for DCVSKU: n/a
There are no reviews yet.