UT206A is a professional 1000A AC digital clamp meter with 40mm jaw. It is suitable for conductors up to 500MCM and the new structure is ergonomically designed. UT205A is the first choice for electricians to do electrical testing.
Clamp Meters
UT206 1000A ACA Digital Clamp Meters
Availability:
20 in stock
UT206A is a professional 1000A AC digital clamp meter with 40mm jaw. It is suitable for conductors up to 500MCM and the new structure is ergonomically designed. UT205A is the first choice for electricians to do electrical testing.
₨12,600 ₨16,350
20 in stock
CompareWeight | 0.52 kg |
---|---|
Dimensions | 11 × 5 × 26 cm |
Model | UT206A | |
AC Current (A) | 400A/1000A | ±(1.5%+5) |
AC Voltage (V) | 4V/40V/400V/600V | ±(1.2%+5) |
DC Voltage (V) | 400mV/4V/40V/400V/600V | ±(0.8%+1) |
Resistance (Ω) | 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ | ±(1%+2) |
Frequency (Hz) | 10Hz~10MHz | ±(0.1%+3) |
Temperature (°C) | -40 °C~1000°C | ±(2%+8) |
Features | ||
Display Count | 4000 | |
Auto Range | √ | |
Jaw Capacity | 40mm | |
Diode | √ | |
Auto Power Off | √ | |
Continuity Buzzer | √ | |
Low Battery Indication | √ | |
Data Hold | √ | |
Relative Mode | √ | |
LCD Backlight | √ | |
Full Icon Display | √ | |
Input Impedance for DCV | Around 10MΩ | √ |
General Characteristics | ||
Power | 9V Battery (6F22) | |
LCD Size | 37mm X 18mm | |
Product Color | Red and grey | |
Product Net Weight | 350g | |
Product Size | 236mm X 97mm X40mm | |
Standard Accessories | Battery, Test Lead, Carrying Bag,
Point Contact Temperature Probe |
|
Standard Individual Packing | Gift Box, English Manual |
Based on 0 reviews
Be the first to review “UT206 1000A ACA Digital Clamp Meters”
-
-
Tool Kits
JM Y01 TOOL KIT
Features:
- Low-key and luxurious at the same time.
- The shell goes through 10 parts of complicated procedures and 550°C of high temperature point injection.
- You can feel a skin-friendly feeling in this electric screwdriver.
- This electric screwdriver can work in 1.5 hours of full-loaded condition or 3-4 hours of no-loaded condition.
- Can duration of 90 days, which can be charged with 220V ac for 1.5 hours, with 5V USB voltage for 4 hours.
- And can be illuminated in all directions with 4 LED downlight.
- It is omnipotent from small products to large products.
SKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Multimeters
UT195M Professional Digital Multimeter
Features
1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V
2. Large 6000-count LCD screen
3. True RMS
4. ACV 750V 5kHz bandwidth
5. Flashlight
6. Auto LCD backlight controlled by light sensor (can be turned off)
7. LoZ voltage test, for ghost voltage measurement
8. Motor phase sequence measurement with 2 probes
9. 20A current measurement (max 30 seconds)
SKU: n/a
There are no reviews yet.