-18%
Multimeters
CMM-10 Multimeter
Availability:
5 in stock
- Autoranging/manual range selection.
- DATA HOLD function, for holding measured values.
- REL function, which allows you to make measurements relative to a stored reference value.
- Continuity test with acoustic signalling (beeper).
- AUTO-OFF function.
- Display 3 7/8 digits (5000 max).
₨11,844 ₨14,478
5 in stock
CompareThe most important features of CMM-10 are:
- Autoranging/manual range selection.
- DATA HOLD function, for holding measured values.
- REL function, which allows you to make measurements relative to a stored reference value.
- Continuity test with acoustic signalling (beeper).
- AUTO-OFF function.
- Display 3 7/8 digits (5000 max).
| Weight | 0.2 kg |
|---|---|
| Dimensions | 14 × 7 × 4 cm |
Frequency measurement
| Range | Resolution | Accuracy |
| 5,000 Hz | 0,001 Hz | ±(1,5% m.v. + 5 digits) |
| 50,00 Hz | 0,01 Hz | |
| 500,0 Hz | 0,1 Hz | ±(1,2% m.v. + 3 digits) |
| 5,000 kHz | 0,001 kHz | |
| 50,00 kHz | 0,01 kHz | |
| 500,0 kHz | 0,1 kHz | |
| 5,000 MHz | 0,001 MHz | ±(1,5% m.v. + 4 digits) |
| 10,00 MHz | 0,01 MHz |
- sensitivity: ≥8 V RMS
Duty cycle measurement
| Range | Resolution | Accuracy |
| 0,1…99,9% | 0,1% | ±(1,2% m.v. + 2 digits) |
- sensitivity: ≥8 V RMS,
- pulse width: 100µs – 100 ms,
- frequency width: 5 Hz…150 kHz.
Temperature measurement
| Range | Resolution | Accuracy* |
| -20°C…+760°C | 1°C | ±(3% m.v. + 5°C, 9°F) |
| -4°F…+1400°F | 1°F |
*) probe (K type) accuracy not included
DC voltage measurement
| Range | Resolution | Accuracy |
| 400,0 mV | 0,1 mV | ±(0,5% m.v. + 2 digits) |
| 4,000 V | 0,001 V | ±(1,2% m.v. + 2 digits) |
| 40,00 V | 0,01 V | ±(1,2% m.v. + 2 digits) |
| 400,0 V | 0,1 V | |
| 600 V | 1 V | ±(1,5% m.v. + 2 digits) |
- input impedance: 7,8 MΩ
AC voltage measurement
| Range | Resolution | Accuracy |
| 400,0 mV | 0,1 mV | ±(1,5% m.v. + 70 digits) |
| 4,000 V | 0,001 V | ±(1,2% m.v. + 3 digits) |
| 40,00 V | 0,01 V | ±(1,5% m.v. + 3 digits) |
| 400,0 V | 0,1 V | |
| 600 V | 1 V | ±(2,0% m.v. + 4 digits) |
- input impedance: 7,8 MΩ,
- frequency range: 50…400 Hz.
DC current measurement
| Range | Resolution | Accuracy |
| 400,0 μA | 0,1 μA | ±(1,0% m.v. + 3 digits) |
| 4 000 μA | 1 μA | ±(1,5% m.v. + 3 digits) |
| 40,00 mA | 0,01 mA | |
| 400,0 mA | 0,1 mA | |
| 4,000 A | 0,001 A | ±(2,5% m.v. + 5 digits) |
| 10,00 A | 0,01 A |
AC current measurement
| Range | Resolution | Accuracy |
| 400,0 μA | 0,1 μA | ±(1,5% m.v. + 5 digits) |
| 4 000 μA | 1 μA | ±(1,8% m.v. + 5 digits) |
| 40,00 mA | 0,01 mA | |
| 400,0 mA | 0,1 mA | |
| 4,000 A | 0,001 A | ±(3,0% m.v. + 7 digitgs) |
| 10,00 A | 0,01 A |
- frequency range: 50…400 Hz.
Resistance measurement
| Range | Resolution | Accuracy |
| 400,0 Ω | 0,1 Ω | ±(1,2% m.v. + 4 digits) |
| 4,000 kΩ | 0,001 kΩ | ±(1,0% m.v. + 2 digits) |
| 40,00 kΩ | 0,01 kΩ | ±(1,2% m.v. + 2 digits) |
| 400,0 kΩ | 0,1 kΩ | |
| 4,000 MΩ | 0,001 MΩ | |
| 40,00 MΩ | 0,01 MΩ | ±(2,0% m.v. + 3 digits) |
Capacitance measurement
| Range | Resolution | Accuracy |
| 40,00 nF | 0,01 nF | ±(5,0% m.v. + 7 digits) |
| 400,0 nF | 0,1 nF | ±(3,0% m.v. + 5 digits) |
| 4,000 μF | 0,001 μF | |
| 40,00 μF | 0,01 μF | |
| 100,0 μF | 0,1 μF | ±(5,0% m.v. + 5 digits) |
“m.v” = measured value
Electric security:
- type of insulation: double, according to EN 61010 – 1 and IEC 61557
- measurement category: CAT II 600 V acc. to EN 61010 – 1:2004
- protection class acc. to EN 60529: IP40
Other technical data:
- power supply: 9 V battery type 6LR61
- diode test: I=0,3 mA, U0 = 1,5 V DC
- continuity test: I<0,3 mA, sound signal for R<50 Ω
- over range indication: 0L displayed
- sampling rate: 2 times per second
- input impedance: 7,8 MΩ (V AC/DC)
- display: 5000 counts LCD display with function indication
- dimensions: 138 x 68 x 37 mm
- weight: approx. 210 g
- fuses: mA, µA range: 0,5 A/250 V fast; A range: 10 A/250 V fast
- auto power OFF: 30 min.
- accordance with following standards: EN 61010 – 1:2004, EN 61010 – 2 – 032
Rated operational conditions:
- operating temperature: 0…+50°C at <70% rel. humidity
- storage temperature: -20…+60°C at <80% rel. humidity
Brand
SONEL
Based on 0 reviews
Be the first to review “CMM-10 Multimeter”
-
Digital Micro Ohm Meter
UT620A Digital Micro Ohm Meter
Features of UT620A Digital Micro Ohm Meter
● Comparison measurement with upper and lower limits● Wire length measurement (m/ft)● Built-in Lithium battery● 1000-group data storage● Improved measurement method which improves accuracy by counter-balancing contact resistance of leads● Data transmission between USB and PC● Data hold● LCD backlight● Zeroing function, relative mode● IND resistance measurement modeSKU: n/a -
Spudger
JM OP07 METAL SPUDGER SET
DescriptionItem Description:- Material: Metal
- Brand: JAKEMY
- Features:
– Dual tipped design, various blades for every repair situation.
– Easy to use and handle.
– 3-in-1 metal set.
– Made of stainless steel, sturdy yet still flexible. - Brand:JAKEMY
- Model: JM-OP07
- Material: Stainless steel
- Place of Application: Repair
- Note:
Be careful when using these tools.With their great strength comes the potential to scratch or otherwise damage components that might be better served with plastic tools such as a plastic tool.
SKU: n/a -
Oscilloscopes
UNI-T 2 Channel UPO2102E Ultra Phosphor Oscilloscope
- 100MHz bandwidth
- number of channels 2
- sampling 1GS / s
- max memory depth 56Mpts (per channel) (previously 28Mpts per channel)
- waveforms per second up to 80,000 wfms/s (formerly 50,000 wfms/s)
- time base range 5ns/div – 50s/div
- input coupling (1MΩ ± 2%) // (20pF ± 3pF)
- verical axis 1mV/div – 20V/div (1MΩ)
- DC gain accuracy ± 3%
- number of saved waveforms 65000
- trigger : Edge, Window, Runt, Time Out, Nth Edge, Delay, Duration, Setup / Hold, Pulse Width, Slope, Video, Pattern, RS232 / UART, I2C, SPI
- mathematical operations with waveforms : A + B, A-B, AxB, A / B, FFT, Logic operation, Editable Advanced, Filter
- automatic Measurement : Max, Min, High, Low, Middle, Pk-Pk, Ample, Mean, Cycle Mean, RMS, Cycle RMS, Cycle Area, OverShoot, PreShoot, Period, Freq, Rise, Fall, + Width, -Width, + Duty, -Duty, RiseDelay, FallDelay, Phase, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF
- number of measurements : 5 simultaneous measurements
- statistics : Mean, Max, Min, standard deviation, number of measurements
- frequency counter : 6 bits
- standard interfaces : USB-Host, USB-Device, LAN, AUX (Trig Out, Pass / Fail)
SKU: n/a
Related products
-
Multimeters
UT107 Handheld Automotive Multi-Purpose Meters
Main Features
1. Dwell angle measurement (DWELL)
2. Tach measurement (RPM)
3. Data hold
4.12V battery test, duty ratio measurement
5. Measurement input port prompt
6. Low battery, auto polarity and over-range indication
7. Complies with CE (European Union) directives
SKU: n/a
There are no reviews yet.