-12%

CMM-40 Industrial Multimeter

Availability:

5 in stock


The most important features of CMM-40 are:

  • autoranging/manual range selection,
  • „DATA HOLD” function, for holding measured values,
  • „REL” function, which allows you to make measurements relative to a stored reference value,
  • „MAX/MIN” function,
  • „PEAK HOLD” function,
  • memory for 2000 measurement resultS,
  • continuity test with acoustic signalling (beeper),
  • „AUTO-OFF” function,
  • display 4¾ digits (40000 max),
  • double molded, waterproof casing.

30,270 34,221

5 in stock

Compare

Industrial multimeter CMM-40 was designed for the purpose of measurements of AC/DC voltage, AC/DC current, resistance, capacitance, frequency (electrical and electronic), duty cycle, temperature and also for testing diodes and continuity.

Category:
Weight 0.4 kg
Dimensions 19 × 8 × 5 cm

Frequency measurement (electronic)

Range Resolution Accuracy
40,000 Hz 0,001 Hz ±(0,1% m.v. + 1 digit)
400,00 Hz 0,01 Hz
4,0000 kHz 0,0001 kHz
40,000 kHz 0,001 kHz
400,00 kHz 0,01 kHz
4,0000 MHz 0,0001 MHz
40,000 MHz 0,001 MHz
100,00 MHz 0,01 MHz not speccified
  • Sensitivity: 0.8 V rms min. @ 20% to 80% duty cycle and <100 kHz; 5 V rms min @ 20% to 80% duty cycle and > 100 kHz

Frequency measurement (electrical)

Range Resolution Accuracy
40,00 Hz…10,000 kHz 0,01 Hz…0,001 kHz ± 0,5% m.v.
  • sensitivity: 1 V rms

Duty cycle measurement

Range Resolution Accuracy
0,10…99,00% 0,01% ±(1,2% m.v. + 2 digits)
  • pulse width: 100μs – 100 ms,
  • frequency width: 5 Hz…150 kHz.

Temperature measurement

Range Resolution Accuracy
-50,0°C…+1200,0°C 0,1°C ±(1% m.v. + 2,5°C)
-58,0°F…+2192,0°F 0,1°F ±(1% m.v. + 4,5°F)

DC voltage measurement

Range Resolution Accuracy
400,0 mV 0,01 mV ±(0,06% m.v. + 4 digits)
4,0000 V 0,0001 V
40,000 V 0,001 V
400,00 V 0,01 V
1000,0 V 0,1 V ±(0,1% w.m. + 5 cyfr)

AC voltage measurement (True RMS)

Range Resolution Accuracy
400,00 mV 0,01 mV ±(1% m.v. + 40 digits)
4,0000 V 0,0001 V ±(1% m.v. + 30 digits)
40,000 V 0,001 V
400,00 V 0,01 V
1000,0 V 0,1 V
  • frequency range: 50…1000 Hz.

AC/DC current measurement (True RMS)

Range Resolution Accuracy
400,00 μA 0,01 μA dla DC ±(1,0% m.v. + 3 digits)

dla AC ±(1,5% m.v. + 30 digits)

4 000,0 μA 0,1 μA
40,000 mA 0,001 mA
400,00 mA 0,01 mA
10,000 A 0,001 A
  • 20 A: 30 sec max with reduced accuracy.

Resistance measurement

Range Resolution Accuracy
400,00 Ω 0,01 Ω ±(0,3% m.v. + 9 digits)
4,0000 kΩ 0,0001 kΩ ±(0,3% m.v. + 4 digits)
40,000 kΩ 0,001 kΩ
400,00 kΩ 0,01 kΩ
4,0000 MΩ 0,0001 MΩ
40,000 MΩ 0,001 MΩ ±(2,0% m.v. + 10 digits)

Capacitance measurement

Range Resolution Accuracy
40,000 nF 0,001 nF ±(3,5% m.v. + 40 digits)
400,00 nF 0,01 nF
4,0000 μF 0,0001 μF ±(3,5% m.v. + 10 digits)
40,000 μF 0,001 μF
400,00 μF 0,01 μF
4000,0 μF 0,1 μF ±(5% m.v. + 10 digits)
40,000 mF 0,001 mF

Other technical data:

  • power supply: 9 V battery type 6LR61
  • diode test: I=0,9 mA, U0 = 2,8 V DC
  • continuity test: I<0,35 mA, sound signal for R<35 Ω
  • over range indication: 0L displayed
  • crest factor: ≤ 3 at full scale up to 500 V; decreasing linearly to ≤ 1,5 at 1000 V
  • PEAK: captures peaks >1 ms
  • sampling rate: 2 times per second
  • input impedance: 10 MΩ (V DC), 9 MΩ (V AC)
  • display: 40000 counts backlit LCD with bargraph, 4¾ digits
  • store capacitance: 2000
  • dimensions: 187 x 81 x 55 mm
  • weight: 342 g
  • fuses: mA, µA range: 0,5 A/1000 V ceramic fast blow; A range: 10 A/1000 V ceramic fast blow
  • auto power OFF: 15 min.
  • accordance with following standards: EN 61010 – 1:2004, EN 61010 – 2 – 032

Electric security:

  • type of insulation: double, according to EN 61010 – 1 and IEC 61557
  • measurement category: CAT III 1000 V acc. to EN 61010 – 1:2004
  • protection class acc. to EN 60529: IP67

Rated operational conditions:

  • operating temperature: 0…+40°C
  • storage temperature: -20…+60°C
  • operating humidity: max 80% up to 87°F (31°C); decreasing linearly to 50% at 104°F (40°C)
  • operating altitude: max 2000 m

„m.v.”- measured value

Brand

SONEL

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “CMM-40 Industrial Multimeter”

There are no reviews yet.

  • UT366A Digital Manometer

    0 out of 5
    (0)

    Features of UT366A Digital Manometer

    Certificates: CE, UKCA

    ● Low battery indication
    ● Unit memory
    ● Auto power off
    ● LCD backlight

    ● LED Indicator Lights
    ● MAX/MIN/AVG/HOLD
    ● P1/P2 measure independently
    ● Wind speed measurement (Optional)

    SKU: n/a
  • UT109 Automobile Multimeter (Discontinued)

    0 out of 5
    (0)

    1. Diode/Data hold

    2. Continuity buzzer
    3. Low battery indication
    4. Input protectio
    SKU: n/a
  • UT315 Vibration Tester

    0 out of 5
    (0)

    Main Features

    1. Can measure acceleration, velocity and displacement

    2. Can select different vibration frequency

    3. High sensitivity sensor probe makes measurement accurate

    4. Auto power off

    5. Data hold

    6. LCD backlight

    7. Max mode

    8. Data storage: 1,999 groups of data

    9. USB interface

    10. Equipped with long and short probes for different field measurements

    11. Equipped with magnet pedestal for ergonomic purpose

    12.  Complies with CE (European Union) directives

    SKU: n/a
  • Battery Load Tester – BT 100D

    0 out of 5
    (0)
    • 100 Amp Digital Battery Load Tester
    • Microprocessor Control–makes for an easy and accurate load test with no need to time yourself
    • Bright, LED Digital Display–indicates both voltage and test results
    • Unique 3-Step Design–LED polarity check function, battery load test and charging system test readout
    • Super-Grip Battery Clamps–heavy-duty and color-coded
    • Baked Enamel, Steel Case–ventilated to keep cool
    • Rubber Insulated Carrying Handle–for comfort and safety
    • Checks both Battery and Charging System
    SKU: n/a
  • UT714 Multifunction Temperature Process Calibrator

    0 out of 5
    (0)

    The UT714 is powerful temperature calibrator that sources and measures thermocouples, RTDs, voltage, and resistance. It can be used to test and calibrate diffrent types of temperature instruments. This device is suitable for testing input/output temperature terminals such as sensors and transmitters.

    SKU: n/a