CMP-401 Digital Clamp-on multimeter
5 in stock
Additionally:
- safe, insulated measuring clamps,
- double molded housing,
- autoranging/manual range selection,
- DATA HOLD function, for holding measured values,
- backlit LCD,
- REL function,
- over range indication,
AUTO-OFF function.
₨25,664 ₨28,956
5 in stock
CompareDC current measurement and AC current.
AC/DC voltage measurement up to 600 V.Resistance measurement and continuity test:
- continuity test with acoustic signalling (beeper) for resistance below 50.
Temperature measurement (Fahrenheit and Celsius units).
Frequency measurement.
Capacitance measurement .
Diode test.
| Weight | 0.2 kg |
|---|---|
| Dimensions | 20 × 7 × 4 cm |
DC current measurement and AC current. .
AC/DC voltage measurement up to 600 V.
Resistance measurement and continuity test:
- continuity test with acoustic signalling (beeper) for resistance below 50 Ω.
Temperature measurement (Fahrenheit and Celsius units).
Frequency measurement.
Capacitance measurement
Diode test.
Additionally:
- safe, insulated measuring clamps,
- double molded housing,
- autoranging/manual range selection,
- „DATA HOLD” function, for holding measured values,
- backlit LCD,
- „REL” function,
- over range indication,
- „AUTO-OFF” function.
Electric security:
- measurement category: CAT III 600 V acc. to EN 61010 – 1:2004
- protection class acc. to EN 60529: IP40
Other technical data:
- power supply: 9 V battery type 6LR61
- display: 4000 counts, backlit LCD
- continuity test: I<0,5 mA, sound signal for R<50 Ω
- diode test: I = 0,3 mA, U0 = 1,5 V DC
- over range indication: 0L displayed
- sampling rate: 2 times per second
- input impedance: 10 MΩ (V DC and V AC)
- clamp size: opening 30 mm (1,2”)
- auto power OFF: approx. 30 min.
- dimensions: 197 x 70 x 40 mm
- weight: 183 g
- accordance with following standards: EN 61010 – 1:2004, EN 61010 – 2 – 032
- quality standard: ISO 9001
Rated operational conditions:
- operating temperature: 0…+40°C
- storage temperature: -20…+60°C
- operating humidity: max 80% up to 31°C; decreasing linearly to 50% at 40°C
- operating altitude: max 2000 m
Temperature measurement
| Range | Accuracy* |
|---|---|
| -20,0…760°C | ±(3% m.v. + 5°C) |
| -4,0…1400°F | ±(3% m.v. + 9°F) |
*probe (K type) accuracy not included
Frequency measurement
| Range | Accuracy |
|---|---|
| 10 Hz … 10 kHz | ±(1,5% m.v. + 2 digits) |
- csensitivity: 100 V (<50 Hz), 50 V (50…400 Hz); 15 V (401 Hz…10 kHz)
AC current measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 40,00 A | 0,01 A | ±(2,5% m.v. + 8 digits) |
| 400,0 A | 0,1 A | ±(2,8% m.v. + 5 digits) |
- frequency range: 50…60 Hz.
DC current measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 40,00 A | 0,01 A | ±(2,5% m.v. + 5 digits) |
| 400,0 A | 0,1 A | ±(2,8% m.v. + 5 digits) |
AC voltage measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 400,0 mV | 0,1 mV | ±(1,5% m.v. + 30 digits) |
| 4,000 V | 0,001 V | ±(1,5% m.v. + 5 digits) |
| 40,00 V | 0,01 V | ±(1,5% m.v. + 5 digits) |
| 400,0 V | 0,1 V | ±(1,5% m.v. + 5 digits) |
| 600,0 V | 1 V | ±(2% m.v. + 5 digits) |
- frequency range: 50…400 Hz.
DC voltage measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 400,0 mV | 0,1 mV | ±(0,8% m.v. + 2 digits) |
| 4,000 V | 0,001 V | ±(1,5% m.v. + 2 digits) |
| 40,00 V | 0,01 V | ±(1,5% m.v. + 2 digits) |
| 400,0 V | 0,1 V | ±(1,5% m.v. + 2 digits) |
| 600,0 V | 1 V | ±(2% m.v. + 2 digits) |
Resistance measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 400,0 Ω | 0,1 Ω | ±(1,0% m.v. + 4 digits) |
| 4,000 kΩ | 0,001 kΩ | ±(1,5% m.v. + 2 digits) |
| 40,00 kΩ | 0,01 kΩ | ±(1,5% m.v. + 2 digits) |
| 400,0 kΩ | 0,1 kΩ | ±(1,5% m.v. + 2 digits) |
| 4,000 MΩ | 0,001 MΩ | ±(2,5% m.v. + 3 digits) |
| 40,00 MΩ | 0,01 MΩ | ±(3,5% m.v. + 5 digits) |
Capacitance measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 40,00 nF | 0,01 nF | ±(4% m.v. + 20 digits) |
| 400,0 nF | 0,1 nF | ±(3% m.v. + 5 digits) |
| 4,000 nF | 0,001 μF | ±(3% m.v. + 5 digits) |
| 40,00 nF | 0,01 μF | ±(3% m.v. + 5 digits) |
| 100,0 nF | 0,1 μF | ±(4% m.v. + 10 digits) |
„m.v.”- measured value
Brand
SONEL
Based on 0 reviews
Be the first to review “CMP-401 Digital Clamp-on multimeter”
-
LCR Meter
UT620 Series Digital Micro Ohm Meters
UT620 series are used to measure DC low resistance through 4-wire method. Some of its features are: Comparison function to determine if the device is in good condition, unknown wire length calculation (FT/M); two-way data transmission by USB interface; built-in rechargeable lithium battery. UT620 can be used in narrow space for on-site troubleshooting, such as metal coating resistance/motor and small transformer winding resistance measurement, earth system joints/welding points/power distribution cabinet bus and lead connection inspection and more.
SKU: UN62B0TUOM -
IR Thermo Meters
UT301C Infrared Thermometers
UT301 series is a professional infrared thermometer that can determine the temperature by testing the infrared energy on the surface. It is used for fast and safe fault detections and maintenance of electric instrument and equipment, engines, motors, and HVAC refrigeration system.
SKU: UN30C1550CIR -
IR Thermo Meters
UT309C Professional Infrared Thermometer
Features
1. 3m drop proof, IP65
2. Large LED display with backlight
3. MAX/MIN/AVG/DIF mode
4. High/Low temperature alarm with LED indication
5. Dual laser measurement to enhance accuracy
6. Lock measurement
7. Adjustable emissivity: adjust according to different testing materials
8. Data hold, auto power off function
SKU: n/a
Related products
-
Clamp Meters
UT222 2500A ACA DCA Digital Clamp Meters
UT222 are stable and safe 3 5/6 digit AC&DC digital clamp meters.It is perfectly designed with over-load protection for all ranges and the unique structure, making it a superb professional meter especially for electricians.
An ideal tool for the maintenance and troubleshooting needed in metallurgy, manufacturing, petroleum, electric power, chemical industry, etc;SKU: n/a -
Clamp Meters
MS 2109A ACA DCA Digital Clamp Meters
● Display 6000 counts
● Jaw Opening Ф26mm/1.0″
● Auto Ranging
● Auto Power Off
● Non-Contact Voltage Detector
● Relative Measurement
● Diode Open Volatge 2.7V
● Continuity Buzzer <50±20Ω
● MAX/MIN
● Data Hold
● Display Backlight
● Work Light
● Low Battery DisplaySKU: n/a -
Clamp Meters
UT281A True RMS AC 3000A Flexible Clamp Meters
1. 2m drop proof, IP54, ETL/Intertek certified 3rd edition CE
2. Coil diameter: 0.75cm, bending length: 24.5cm for UT281A and 45.7cm for UT281C
3. Large LCD display for clear reading
4. True RMS
5. Long press INRUSH key for 2s to measure inrush current
6. Data hold, backlight, auto power off
SKU: n/a -
Clamp Meters
UT216B 600A True RMS Digital Clamp Meters
UT216 series true RMS digital clamp meter is a new-generation practical electrotechnical measurement meter which has the features of high reliability, high safety, automatic range and handheld type, has full-range overload protection and unique appearance design, is more excellent in performance, and is an ideal tool for detection, maintenance and repair of various universities and colleges, smelting, communication, manufacturing, petroleum, national defense, electrical, power and circuit equipment.
UTD216B (main features)- 1、600A AC current measurement；
- 2、True RMS response for ACV and ACA；
- 3、99.99mF capacitance measurement；
- 4、V.F.C function for measuring signal at variable frequency ；
- 5、Non-contact voltage detection with LED indication；
- 6、Flashlight for working at dark environment.
SKU: n/a
There are no reviews yet.