-
×
TDGC 5000VA
- Vendor:
superworld
Subtotal: ₨32,903
-19%
DM4070 Digital LCR Meter 3 1/2 20H 2000uF 20Mohm self discharge resistance inductance capacitance meter tester
General characteristics
Display: LCD Max. display: 1999
Inductance measurement: 0.1uH～20H
Capacitance measurement: 0.1pF～2000uF
Resistance measurement: 0.01Ω～20MΩ
Zero adjustment: To obtain accurate measuring values, perform zero adjustment before measuring capacitance under 20nF
Over range: display “1”
Low battery indicator: “
” symbol appears
Sampling rate: 0-5 seconds
Working temperature: 0～40°
Relative humidity: less than 80%
Meter size: 185mm×93mm×35mm (length × width × height)
Weight: Approx.290g(including 9V battery)
Power source: one 9V battery (6F22 or equivalent)
Battery life: alkaline battery lasts 150 hours
Standard accessories: test leads, operation manual
| Special Function | VC6013/VC6243+/DM4070 |
| Automatic discharge | Yes |
| Data Hold | Yes |
| Auto power off | Auto off After 30s when didn’t measuring |
| Backlight | Delay about 10s |
| Function protection | Yes |
| Shockproof protection | Yes |
| Operation way | Manual range |
| Sampling rate | 3 times/s |
| Max Display | 1999 |
| LCD size | 65*41mm |
| Battery | 9V(6F22) Not include Battery |
Brand
China Brand
Based on 0 reviews
Be the first to review “DM 4070 LCR METER”
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Multimeters
UT89XD Digital Multimeter
1. 1000V AC/DC； 20A AC/DC
2. True RMS, 6000 count3. Dual range NCV test which quickly identifies neutral and live wiresthrough light intensity4. LED measurement5. Audible/visual alarm6. Capacitor charging indicator7. Ergonomic design8. Double injection molding9. 1m drop proof10. Flashlight; Auto backlightSKU: n/a -
Related products
-
Digital Multi Meter
UNI-T UTL8212 High-Precision Compact DC Electronic Load Tester Single/Dual Channel 150V Power Supply Current Test – UTL821
Digital Multi MeterUNI-T UTL8212 High-Precision Compact DC Electronic Load Tester Single/Dual Channel 150V Power Supply Current Test – UTL821
Power supply test, adapter/charger test, battery test, lithium battery protection board test, ATE, component test, etc., commonly used in home appliance manufacturers, LCD and other computer component manufacturers, switching power supply and LED manufacturers, adapter charger manufacturers and other companies Production and testing use
SKU: n/a
There are no reviews yet.