UTG2062B Function/Arbitrary Waveform Generator
5 in stock
1. 1μHz full-band resolution
₨162,000 ₨172,354
5 in stock
CompareWeight | 3.2 kg |
---|---|
Dimensions | 26 × 11 × 32 cm |
Specifications | UTG2062B |
Max frequency | 60MHz |
Channels | 2 |
Sampling rate | 320MS/s |
Waveforms | Sine, square, ramp, pulse, noise, DC, arbitrary; UTG2000B only: harmonic |
Working modes | Output on/off, continuous, modulation, sweep, burst |
Modulations | AM, FM, PM, ASK, FSK, PSK, PWM, BPSK, QPSK, OSK, DSB-AM, SUM, QAM |
Arbitrary Waveform | |
Length | 8pts~16Mpts |
Vertical resolution | 16 bits (symbol included) |
Frequency Characteristics | |
Sine | 1μHz~60MHz |
Square | 1μHz~25MHz |
Pulse | 1μHz~20MHz |
Ramp | 1μHz~3MHz |
Harmonic | 1μHz~30MHz |
Arbitrary | 1μHz~15MHz |
Noise | 60MHz (-3dB) |
Resolution | 1μHz |
Accuracy | ±0.5ppm 25℃ |
First year aging rate: 1ppm | |
Temperature coefficient: ±0.5ppm/℃ | |
Temperature Coeifficient | <2ppm/℃ |
Interfaces | USB Host, USB Device, 10MHz clock source input/output |
General Characteristics | |
Power | 100V~240V ACrms, 50Hz/60Hz |
Display | 4.3-inch TFT LCD, WVGA (480 x 272) |
Product color | White and grey |
Product net weight | 3.2kg |
Product size | 265mm x 110mm x 320mm |
Standard accessories | BNC-BNC cable, BNC cable with alligator clips, power cord, USB interface cable, PC software CD |
Standard individual packing | Carton box |
Standard quantity per carton | 2pcs |
Standard carton measurement | 380mm x 330mm x 320mm |
Standard carton gross weight | 8.5kg |
Based on 0 reviews
Be the first to review “UTG2062B Function/Arbitrary Waveform Generator”
-
Phase Detector Meters
UT262A Non-Contact Phase Detector
UT262 series adopts clamp type non-contact measuring method, which means user doesn’t need to get in touch with high-voltage exposed wires. It can start detection after three super-induction and high-insulation clamps clamp the exterior of the three-phase wires, which is safer, more practical, and more effective. Beside phase sequence detection, UT262 series can be also used for live wire detection, simple electrical inspection, phase identification, missing-phase judgment, and wire breaker searching. It is a perfect tool for phase sequence detection, motor mounting, and wires maintenance.
SKU: 22000 -
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Clamp Meters
UT216A 600A Digital Clamp Meters
UT216 series true RMS digital clamp meter is a new-generation practical electrotechnical measurement meter which has the features of high reliability, high safety, automatic range and handheld type, has full-range overload protection and unique appearance design, is more excellent in performance, and is an ideal tool for detection, maintenance and repair of various universities and colleges, smelting, communication, manufacturing, petroleum, national defense, electrical, power and circuit equipment.
UTD216A (main features)- 1、600A AC current measurement
- 2、True RMS response for ACV and ACA
- 3、99.99mF capacitance measurement
- 4、Non-contact voltage detection with LED indication
- 5、Flashlight for working at dark environment
SKU: n/a
There are no reviews yet.