UT505 series handheld true RMS insulation resistance testers combine features of a digital multimeter and insulation resistance tester. Aside from the typical multimeter functions, these meters can also measure insulation resistance, PI, DAR, and automatically calculate resistance ratio to determine the insulation status.
Insulation Tester
UT505B Handheld Insulation Resistance Tester
Availability:
5 in stock
1. Auto power off
2. LCD backlight
3. High voltage output alarm
4. 99-group data storage
5. Data hold
6. Meets IEC 61557: 61557-1:2007; 61557-2:2007; 61557-4:2007
₨64,800 ₨68,310
5 in stock
CompareApplications:
UT505 can be used in insulation resistance testing of precision tools, including motors, cables, transformers, switches, electrical appliances, and insulated materials.
Weight | 0.6 kg |
---|---|
Dimensions | 10 × 22 × 6 cm |
Specifications | Range | UT505B | |
Insulation resistance (Ω) | 50V | 50V/100V/250V/500V/1000V | 0%~20% |
0.01MΩ~50MΩ | ±(3%+3) | ||
50MΩ~1GΩ | ±(3%+3) | ||
100V | 1GΩ~10GΩ | ±(10%+3) | |
0.01MΩ~100MΩ | ±(3%+3) | ||
100MΩ~1GΩ | ±(3%+3) | ||
250V | 1GΩ~20GΩ | ±(10%+3) | |
0.01MΩ~200MΩ | ±(1.5%+5) | ||
200MΩ~1GΩ | ±(1.5%+5) | ||
500V | 1GΩ~50GΩ | ±(10%+3) | |
0.01MΩ~500MΩ | ±(1.5%+5) | ||
500MΩ~1GΩ | ±(1.5%+5) | ||
1000V | 1GΩ~100GΩ | ±(10%+3) | |
0.1MΩ~2000MΩ | ±(1.5%+5) | ||
2GΩ~9.9GΩ | ±(5%+3) | ||
10GΩ~20GΩ | ±(7%+3) | ||
20GΩ~200GΩ | ±(20%+3) | ||
Load current | 50V (R=50kΩ) 1mA | 0%~10% | |
100V (R=100kΩ) 1mA | 0%~10% | ||
250V (R=250kΩ) 1mA | 0%~10% | ||
500V (R=500kΩ) 1mA | 0%~10% | ||
1000V (R=1MΩ) 1mA | 0%~10% | ||
Short circuit current | <2mA | ||
Leakage current (A) | 10~2000μA | ±(10%+3) | |
Low resistance (Ω) | 0.01Ω~100Ω (about 5V/>200mA/20mA optional) | ±(1.5%+3) | |
General resistance (Ω) | 0.01kΩ~10MΩ | ±(3%+3) | |
DC voltage (V) | 0V~600V | ±(2%+3) | |
AC voltage (V) | 0V~600V | ±(1.5%+5) | |
Frequency (Hz) | 45~1kHz | ±(0.1%+3) | |
Capacitance (F) | 100pF~500μF | ±(5%+5) | |
Features | |||
Display count | 6000 | ||
Auto range/True RMS | √ | ||
Step voltage | 10% steps at 50%~120% of range | √ | |
DAR | 60s/15s and 60s/30s | √ | |
PI/Timing measurement | √ | ||
Auto discharge | √ | ||
Auto fuse check | √ | ||
Analog bar graph | √ | ||
Continuity buzzer | √ | ||
Comparison measurement | √ | ||
Low battery indication | √ | ||
General Characterisitics | |||
Power | 1.5V battery (LR6) x 6 | ||
Display | 78mm x 59mm | ||
Product color | Red and grey | ||
Product net weight | 630g | ||
Product size | 103mm x 225mm x 59mm | ||
Standard accessories | Batteries, test leads, test probes, alligator clips | ||
Standard individual packing | Carrying bag, gift box, English manual | ||
Standard quantity per carton | 20pcs | ||
Standard carton measurement | 515mm x 380mm x 385mm (0.075 CBM per standard carton) | ||
Standard carton gross weight | 20.8kg | ||
Optional accessory | Remote test lead |
Based on 0 reviews
Be the first to review “UT505B Handheld Insulation Resistance Tester”
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
There are no reviews yet.