UT505 series handheld true RMS insulation resistance testers combine features of a digital multimeter and insulation resistance tester. Aside from the typical multimeter functions, these meters can also measure insulation resistance, PI, DAR, and automatically calculate resistance ratio to determine the insulation status.
Insulation Tester
UT505B Handheld Insulation Resistance Tester
Availability:
5 in stock
1. Auto power off
2. LCD backlight
3. High voltage output alarm
4. 99-group data storage
5. Data hold
6. Meets IEC 61557: 61557-1:2007; 61557-2:2007; 61557-4:2007
₨64,800 ₨68,310
5 in stock
CompareApplications:
UT505 can be used in insulation resistance testing of precision tools, including motors, cables, transformers, switches, electrical appliances, and insulated materials.
Weight | 0.6 kg |
---|---|
Dimensions | 10 × 22 × 6 cm |
Specifications | Range | UT505B | |
Insulation resistance (Ω) | 50V | 50V/100V/250V/500V/1000V | 0%~20% |
0.01MΩ~50MΩ | ±(3%+3) | ||
50MΩ~1GΩ | ±(3%+3) | ||
100V | 1GΩ~10GΩ | ±(10%+3) | |
0.01MΩ~100MΩ | ±(3%+3) | ||
100MΩ~1GΩ | ±(3%+3) | ||
250V | 1GΩ~20GΩ | ±(10%+3) | |
0.01MΩ~200MΩ | ±(1.5%+5) | ||
200MΩ~1GΩ | ±(1.5%+5) | ||
500V | 1GΩ~50GΩ | ±(10%+3) | |
0.01MΩ~500MΩ | ±(1.5%+5) | ||
500MΩ~1GΩ | ±(1.5%+5) | ||
1000V | 1GΩ~100GΩ | ±(10%+3) | |
0.1MΩ~2000MΩ | ±(1.5%+5) | ||
2GΩ~9.9GΩ | ±(5%+3) | ||
10GΩ~20GΩ | ±(7%+3) | ||
20GΩ~200GΩ | ±(20%+3) | ||
Load current | 50V (R=50kΩ) 1mA | 0%~10% | |
100V (R=100kΩ) 1mA | 0%~10% | ||
250V (R=250kΩ) 1mA | 0%~10% | ||
500V (R=500kΩ) 1mA | 0%~10% | ||
1000V (R=1MΩ) 1mA | 0%~10% | ||
Short circuit current | <2mA | ||
Leakage current (A) | 10~2000μA | ±(10%+3) | |
Low resistance (Ω) | 0.01Ω~100Ω (about 5V/>200mA/20mA optional) | ±(1.5%+3) | |
General resistance (Ω) | 0.01kΩ~10MΩ | ±(3%+3) | |
DC voltage (V) | 0V~600V | ±(2%+3) | |
AC voltage (V) | 0V~600V | ±(1.5%+5) | |
Frequency (Hz) | 45~1kHz | ±(0.1%+3) | |
Capacitance (F) | 100pF~500μF | ±(5%+5) | |
Features | |||
Display count | 6000 | ||
Auto range/True RMS | √ | ||
Step voltage | 10% steps at 50%~120% of range | √ | |
DAR | 60s/15s and 60s/30s | √ | |
PI/Timing measurement | √ | ||
Auto discharge | √ | ||
Auto fuse check | √ | ||
Analog bar graph | √ | ||
Continuity buzzer | √ | ||
Comparison measurement | √ | ||
Low battery indication | √ | ||
General Characterisitics | |||
Power | 1.5V battery (LR6) x 6 | ||
Display | 78mm x 59mm | ||
Product color | Red and grey | ||
Product net weight | 630g | ||
Product size | 103mm x 225mm x 59mm | ||
Standard accessories | Batteries, test leads, test probes, alligator clips | ||
Standard individual packing | Carrying bag, gift box, English manual | ||
Standard quantity per carton | 20pcs | ||
Standard carton measurement | 515mm x 380mm x 385mm (0.075 CBM per standard carton) | ||
Standard carton gross weight | 20.8kg | ||
Optional accessory | Remote test lead |
Based on 0 reviews
Be the first to review “UT505B Handheld Insulation Resistance Tester”
-
LCR Meter
UT622A Digital Inductance LCR Meter
Specifications UT622A UT622C UT622E Certificates CE, RoHS Test frequency 100Hz, 120Hz, 1kHz, 10kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz Test signal level 0.1Vrms, 0.3Vrms, 1Vrms Output impedance 100Ω Measurement parameters Primary: L/C/R/Z
Secondary: D/Q/θ/ESRPrimary: L/C/R/Z/DCR Secondary: D/Q/θ/ESR Auto LCR √ Test terminals Three-terminal test jacks, five-terminal test sockets Test rate Fast (20 times/s), medium (5 times/s), or slow (2 times/s) DCR test rate — — Fast (20 times/s), medium (5 times/s), or slow (2 times/s) Ranging mode Auto/hold Tolerance range 1%~20% Testing circuit mode Series/parallel mode Clearing correction Open/short circuit Fuse of test ports 0.1A/250V Communication interface Mini-USB LED alarm for tolerance
(pass: green; fail: red)√ √ √ Display range Maximum reading 99999 Minimum resolution 0.0001 Maximum accuracy 0.001 L 0.00μH~99.999H C 0.00pF~99.999mF Z/R 0.0000Ω~9.9999MΩ ESR 0.0000Ω~999.99Ω D 0.0000~9.9999 Q 0.0000~99999 θ -179.9°~179.9° DCR — — 0.01mΩ–20.000MΩ Temperature coefficient 0.1× (specified accuracy) /°C (0°C~18°C or 28°C~40°C) General Characteristics Power 3.7V 1800mAh lithium polymer battery; Input: 220V (1±10%), 50Hz (1±5%); Mini-USB output: 5V, 1A Display 2.8′ TFT LCD 320X240 Product net weight 420g Product size 93mm x 192mm x 44mm Standard accessories Short circuit board (UTR-001), USB cable, 5V 1A power adapter, Four-terminal Kelvin testleads (UTR-L100k-H) (UT622C/E), Alligator clip test leads with rubber plugs (UTR-002)(UT622A), English manual SKU: n/a -
Laser Power Meter
UT385 Laser Power Meter
Features of UT385 Laser Power Meter
Certificates: CE, RoHS
● Precise laser sensor
● Split design with retractable spring wire
● LCD screen for clear readings
● Data storage function● Selectable and customizable wavelengths
● Threshold alarm function
● Low power consumptionSKU: n/a -
Insulation Tester
MIC-15k1 ,15kV Insulation Quality Analyzer
Features:
- Diagnostics of insulation systems based on standard measurements of IR, DAR, PI, SV, RT, DD, widened with thepartial discharge (PD) indicator for every each of these measurements.
- It allows testing the electrical durability of the tested object – breakdown voltage indication.
- High resistance to electromagnetic interferences guarantees uninterrupted work in power stations and close to high voltage transmission lines up to 1200 kV AC and 500 kV DC.
- The function of smooth voltage rise in time (RT – Ramp Test) allows to state the partial discharges in the facility and to carry out a partial location of their occurrence.
- Efficient converter with a power of ~150 W that enables insulation burnout, allowing for pinpointing the location of cables and wires short circuit using one of the following:
- visual method (if power cables are visible along the entire length),
- reflectometric methods, seismic-acoustic waves detector, or with A-frame to indicate direction of the fault (the conductor must be buried in the ground with earth direct contact).
- Compatible with external software.
SKU: n/a -
Microscope
MECHANIC Industrial Triocular stereo microscope MC75T-B1
MECHANIC Industrial Triocular stereo microscope MC75T-B1
Binocluar magnification(7X-45X/2.1X-180X)
Eyepiece(WF10X/20MM,WF20X/10MM)
Objectlens(10.6X-5.5X),
Aux(0.3X/287,0.5X/165,0.7X/120,1.5X/45,2X/30)
Continuourszoom(0.7X-4.5X)
SKU: n/a
There are no reviews yet.