JAKEMY JM-Y02 18 in 1 Precision Electric Screwdriver Set DIY tool repair kit with aluminium alloy handle
Dedicated to Precision electronic product maintenance.
10 in stock
Application:
Cell phone/Tablet/Camera/Laptop/Glasses
₨8,633 ₨11,990
10 in stock
CompareJAKEMY JM-Y02 18 in 1 Precision Electric Screwdriver Set DIY tool repair kit with aluminium alloy handle
Dedicated to Precision electronic product maintenance.
Weight | 0.5 kg |
---|---|
Dimensions | 10 × 5 × 4 cm |
800mAH Battery capacity
Matching with micro USB wiring and plugs
Input voltage supports 220V AC/5v USB voltage
FCC CE and other certificates are completed
Guaranteed Safety and portability
No-load speed can up to 395r/min
Take the demolition of the iphone bottom five-star 0.8 screws as an example*
You can remove a screw in an average of 2 seconds
Greatly improve the efficiency of electric screwdriver use
(*Derived from experimental data)
Features:
Possible measurements:
UT262 series adopts clamp type non-contact measuring method, which means user doesn’t need to get in touch with high-voltage exposed wires. It can start detection after three super-induction and high-insulation clamps clamp the exterior of the three-phase wires, which is safer, more practical, and more effective. Beside phase sequence detection, UT262 series can be also used for live wire detection, simple electrical inspection, phase identification, missing-phase judgment, and wire breaker searching. It is a perfect tool for phase sequence detection, motor mounting, and wires maintenance.
Descriptions:
1.This is a 5999 counts automatic digital clamp multimeter,small and compact design for easy carrying.
2.Stable performance,high precision,high reliability,clear reading and overload protection.
3.It is a ideal tool and instrument,laboratory,factory,radio enthusiasts and The ideal tool for the family.
Specifications:
Brand:WINAPEX
Model: 8203
Color:Black
Jaw:40mm
Maximum display:5999
DC Voltage: 6V/60V/600V/1000V
AC Voltage: 6V/60V/600V/750V
AC Current: 60A/600A
DC Current: 60A/600A
Resistance(ohm):600Ω/6KΩ/60Ω/600KΩ/6MΩ/40MΩ
Capacitance:60nF/600nF/6uF/60uF/600uF/6mF/30mF
Frequency:10Hz/100Hz/1kHz/10Hz/100Hz/1MHz/10MHz
Temperature:(-20-1000 )℃/(0-1832 )℉
DC voltage DCV :yes
AC voltage ACV :yes
AC current ACA :yes
DC current DCA :yes
T-RMS:yes
NCV:yes
Square wave output:yes
On-Off Test :yes
Diode measurement:yes
Buzzer:yes
Zero line / Fire line test :yes
Data hold:yes
Material: Plastic, Electronic Parts
Battery: 2 x 1.5V AAA Batteries (not included)
Product size:176x67x33mm/6.86×2.61×1.29in
Product weight:305g/10.68oz
Package information:
Package weight:350g/12.25oz
Package size:210x80x35mm/8.19×3.12×1.37in
General Box Package
Package included:
1 x Clamp Meter
1 x Pair of test leads
1 x Thermocouple
1 x User Manual
Noted:
1.Cannot measure,there is no current through the ground wire,can only be measured as a single wire or zero Iine.
2.Cannot measure two or more lines at the same time.
3.A line contains two or more than two wire core can not be measured.
There are no reviews yet.