1. Ergonomic exterior, comfortable handling
Laser Distance Meters
LM80 Laser Distance Meter
Availability:
19 in stock
1. Ergonomic exterior, comfortable handling
2. Millimeter accuracy
3. Large, multiple angle HD display
5. Physical and electronics leveler
6. Multiple functions: Max/Min/continuous measurement, displacement calculation, data storage, and more
7. Auto power off after 3 minutes without operation
₨7,380 ₨9,728
19 in stock
Compare2. Millimeter accuracy
3. Large, multiple angle HD display
5. Physical and electronics leveler
6. Multiple functions: Max/Min/continuous measurement, displacement calculation, data storage, and more
7. Auto power off after 3 minutes without operation
Weight | 0.4 kg |
---|---|
Dimensions | 10 × 6 × 4 cm |
Specifications | LM80 |
Display type | LCD |
Display size | 2.0-inches |
Range | 80m |
Min. display unit | 0.001m |
Measurement units | m/ft/in |
Measurement basis | front/rear |
Accuracy | ±(2mm+5 x 10-5 D) |
Laser class | 2 |
Laser type | 630~670nm, ﹤1mW |
Features | |
Single measurement | √ |
Continuous measurement | √ |
Max/Min/Area | √ |
Volume | √ |
Pythagoras | √ |
Add/Subtract | √ |
Auto leveling horizontal | √ |
Auto leveling vertical | √ |
Data storage | 20 groups |
Auto power off | 3 minutes without operation |
Auto laser off | 30s without operation |
Auto backlight off | 10s without operation |
Tilt angle | ±90.0° |
Audio indication | √ |
Battery status display | √ |
Storage temperature | -20℃~70℃ |
Operating temperature | 0℃~40℃ |
Based on 0 reviews
Be the first to review “LM80 Laser Distance Meter”
-
Power Quality Analyzer
PQM-707 Power Quality Analyzer
-
Features:
- 7″ touch screen – intuitive operating
- CAT IV 600V – high safety
- all parameters acc. to class S – high accuracy of measurements
- Li-Ion rechargeable battery – higher mobility
- removable memory card – recording data with no restrictions
Possible measurements:
- Measurements according to EN 50160,
- Voltage L1, L2, L3, N-PE (five inputs),
– average, minimum, maximum values, range to 760 V, ability to work with voltage transformers, - Current L1, L2, L3, N (four inputs),
– average, minimum, maximum values, measurement current with range to 3 kA (depends on used clamp), ability to work with current transformers, - Crest factor for voltage and current,
- Frequency from 40 Hz to 70 Hz ,
- Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive),
- Power recording:
- Budeanu method,
- IEEE 1459,
- Active, reactive, apparent energy,
- Power factor, cosφ, tgφ,
- Up to 50th harmonics for voltage and current,
- Total Harmonic Distortion (THD) for voltage and current,
- Short-term (PST) and long-term (PLT) flicker,
- Unbalance of voltage and current,
- Current and voltage events registration including waveforms and RMS graphs half period,
- Inrush current
- Calculator of energy tariffs
- ANALYZER MEASURES AND RECORDS ACCORDING TO THE IEC 61000-4-30 CLASS S STANDARD.
SKU: n/a -
-
Insulation Tester
MIC-5001, 5000V Insulation Tester
Insulation resistance measurement in a compact, light-weight, low-cost design.
- Measurement to 5 TΩ
- Measuring voltage selectable from 50 V to 500 V range in 50 V steps, and from 500 V to 5000 V range in 100 V steps
- Continuous indication of insulation resistance or leakage current
- Automatic discharge of stored charge due to capacitance of tested object after the insulation resistance measurement
- Audio beeps every five seconds to alert user test is proceeding, and to get time characteristics
- Measured test times of T1, T2 and T3 for measuring Absorption Coefficient, Dielectric Absorption Ratio DAR. and Polarization Index PI
- Continuous display of test voltage during the measurement
- Protection against measuring live objects
- Two and three-lead measurement method
- Ramp Test Insulation resistance measurement
- Measurement of breakdown voltage with increments up to 1 kV / s
- Measurement of alternating and direct voltages from 0 V to 750 V
- 990 cells of memory (11880 records) to record results
- Data transfer to PC via USB cable
- Built-in rechargeable battery pack
- Meets the requirements of the EN 61557 standard
- Charge from optional car lighter (12 V) socket accessory
SKU: n/a -
Process Celibrators
UT725 Multifunction Process Calibrator
Features of UT725 Multifunction Process Calibrator
Certifications: CE, UKCA
● Step/ramp functions
● Source and measure accuracy up to 0.02%● Rechargeable battery● Contrast adjustment● Auto power off (Time adjustable)● Stores and recalls setups● USB communication● Simultaneously measure and output different process signal in real time● Pressure measure with specified pressure modules, and sourcing pressure● Provides 24V loop power to transmitter while conducting mA current measurement at the same timeSKU: n/a
There are no reviews yet.