-
×
UT262A Non-Contact Phase Detector
- Vendor:
superworld
Subtotal: ₨21,600
-4%
Clamp Meters
Mastech MS2101 – Digital clamp multimeter
Digital clamp meter to measure AC/DC current, voltage, resistance, capacitance, frequency and duty cycle.
₨12,500 ₨13,000
Digital clamp meter to measure AC/DC current, voltage, resistance, capacitance, frequency and duty cycle.
| Max. LCD display | 3999 |
|---|---|
| Range selection | automatic |
| DC voltage | 0,4/4/40/400 V ± 0.8%, 1000 V ± 1,0% |
| AC voltage | 4/40/400 V ± 1,0%, 700 V ± 1,2% |
| DC current | 400/1000 A ± 3,0% |
| AC current | 400/1000 A ± 3,0% |
| Resistance | 400/4k/40k/400k/4 MΩ ± 1,0%, 40 MΩ ± 2,0% |
| Capacitance | 4n/40n/400n/4 µF ± 4,0% |
| Frequency range | 40 Hz ÷ 100 kHz ± 2,0% |
| Temperature | -40 °C ÷ 750 °C ± 1,0% |
| Duty cycle | 0,1% ÷ 99,9% |
| Diode test | yes |
| Continuity test | yes |
| Data hold | yes |
| Dimensions | 250x99x43 mm |
| Power | 9V 6F22 battery |
| Weight | 480g |
| Manufacturer | Mastech |
Brand
MASTECH
Based on 0 reviews
Be the first to review “Mastech MS2101 – Digital clamp multimeter”
-
Insulation Tester
MIC-2501,2500V Insulation Resistance Meter
Electrical safety:
- type of insulation: double, in acc. with EN 61010-1 und IEC 61557
- measurement category: IV 600 V (III 1000 V) in acc. to EN 61010-1
- case protection rating in acc. with EN 60529: IP65
Other technical specifications:
- power supply of the meter SONEL L-1 NiMH 9,6 V; DC 12 V 2,5 A
- weight of the meter: approx. 0,9 kg
- dimensions: 200 x 180 x 77 mm
- display: LCD segment display
- measurement results memory: 990 cells, 11880 records,
- transmission of measurement results: USB
SKU: n/a
Related products
-
Clamp Meters
MS 2109A ACA DCA Digital Clamp Meters
● Display 6000 counts
● Jaw Opening Ф26mm/1.0″
● Auto Ranging
● Auto Power Off
● Non-Contact Voltage Detector
● Relative Measurement
● Diode Open Volatge 2.7V
● Continuity Buzzer <50±20Ω
● MAX/MIN
● Data Hold
● Display Backlight
● Work Light
● Low Battery DisplaySKU: n/a -
-
Clamp Meters
UT219DS ACA DCA Professional Clamp Meters with Motor LPF Test
- UT-219 professional clamp meter series is three-proofing digital clamp meter specially designed for professional industrial users.
- The industrial design of this series is rugged and durable, and capable of withstanding the impact from 2 meters fall-down.
- The waterproof rating is up to IP54; therefore, it can be used in environment with water splashing or much more dust.
- The whole series is configured with LoZ (Low Impedance Input) AC voltage tap position, which is capable of testing the false voltage; auto backlight function can be used continuously under the circumstance of emergency power outage.
- UT-219DS is also provided with MOTOR test function, allowing to directly test the phase sequence of three phase AC motor by means of the probe. UT-219 series is much more in compliance with CAT IV 600V safety level, and certified by the German GS institution.
SKU: n/a -
Clamp Meters
UT256B ACA DCA Fork Clamp Meters
UT256 series is an AC/DC fork meter with high reliability, high security, auto-range, and mini shape. Its appearance adopts creative design so that wires to be tested can be stuck by the jaw directly instead of after the jaw is pressed to open. It can measure AC/DC current provided with true RMS function. Flashlight on the meter is specially designed for smooth measurement under darkness. Full-range overload protection and distinctive appearance design make it be a new-generation practical electrical measuring meter with better performance.
SKU: n/a
There are no reviews yet.