UT-L21 Probe UT-L Probes and Test Leads
20 in stock
Leads length: 900mm
Rod length: 133mm
Tip length: 15.8mm
Safety level: CAT Ⅲ 1000V/CAT Ⅳ 600V 20A
Features and application: cross plug with shield sleeve, general type probe
Amount: 1PCS
₨840 ₨872
20 in stock
CompareLeads length: 900mm
Rod length: 133mm
Tip length: 15.8mm
Safety level: CAT Ⅲ 1000V/CAT Ⅳ 600V 20A
Features and application: cross plug with shield sleeve, general type probe
Amount: 1PCS
| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 2 × 3 cm |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT-L21 Probe UT-L Probes and Test Leads”
-
Phase Detector Meters
TKF-12 Phase Sequence Tester
Phase sequence indication (direction of field rotation) in the power network with rated phase-to-phase voltage (120…690 V) AC by LED signalization.
Operation in the power network with frequency range 10…70 Hz.
Indication of the voltage presence in the particular phases by neon lamps signalization.
Power supply from the tested network (continuous operation to 15 minutes for max. voltage).
Protection against faulty indication of field rotation.SKU: n/a -
Environment Meters
UT362 Anemometer
1. Data hold, LCD backlight
2. ℃/℉ selectable3. Auto power off (cancelable)4. 2044 sets data storage5. Auto record function with 0 .5~255s interval6. Wearproof fan shaft for improved accuracy and reliability7. Wind speed modes: MAX, MIN, Real-time8. Wind count modes: MAX, 2/3 MAX, MIN, AVG, real-time9. 7 selectable units: m/s, km/h, ft/min, MPH, KNOTS, CFM, CMMSKU: n/a -
Usb Tester
UT658LOAD USB Testers
Features of UT658 Series USB Testers
Certifications: CE, UKCA
● Type-A/C interface
● CE certification
● 10 sets of data storage
● Loop equivalent resistance measurement (1-480Ω)
● Same screen shows voltage, current, power, capacity, etc.
● Support fast charge protocol
SKU: n/a -
Environment Meters
A25M PM2.5 Air Quality Meter
Features & Merits
1. Convenient to carry with exquisite design;
2. PM2.5 concentration and ambient temperature display together on screen;
3. Six emoticons to indicate PM2.5 concentration grade (top quality, good, mild, moderate, severe, poison);
4. Designed with laser sensor for auto calibration & real-time test;
5. Can continuously work for 4hrs with rechargeable polymer battery;
6. Equipped with wall & car mounts for application in various environments;
7. Test with one key, over-range indication;
8. °C/°F unit switching
SKU: n/a
Related products
-
Meter Leads
UT L25 Meter Lead
- Suitable for digital multimeter testing, convenient to use.
- Used to test current,voltage,resistance,capacitance,frequency,etc.
- Test pen tip with rubber shrouded protection, prevent wear and lasting use.
- High quality, it’s a good tool and brings a lot of conveniences.
- If you want to change your multimeter test lead, this is a great choice.
- Double insulated wire.
- Removable tip.
SKU: n/a -
Meter Leads
UT L28 Meter Lead
- Suitable for digital multimeter testing, convenient to use.
- Used to test current,voltage,resistance,capacitance,frequency,etc.
- Test pen tip with rubber shrouded protection, prevent wear and lasting use.
- High quality, it’s a good tool and brings a lot of conveniences.
- Double insulated wire.
- Removable tip shield sleeve.
- Banana plug input terminal, general type probes.● Leads length: 900mm, Rod length: 128mm
● Tip length: 16.8mm● Safety level: CAT III 1000V/CAT IV 600V 10A● Safety certificate: EN 61010-031 A1:2015● Features and application: Double insulated wire, removable
SKU: n/a
There are no reviews yet.