-
×
UT281C True RMS AC 3000A Flexible Clamp Meters
- Vendor:
superworld
Subtotal: ₨48,800
Insulation Tester
MIC-15k1 ,15kV Insulation Quality Analyzer
Availability:
1 in stock
Features:
- Diagnostics of insulation systems based on standard measurements of IR, DAR, PI, SV, RT, DD, widened with thepartial discharge (PD) indicator for every each of these measurements.
- It allows testing the electrical durability of the tested object – breakdown voltage indication.
- High resistance to electromagnetic interferences guarantees uninterrupted work in power stations and close to high voltage transmission lines up to 1200 kV AC and 500 kV DC.
- The function of smooth voltage rise in time (RT – Ramp Test) allows to state the partial discharges in the facility and to carry out a partial location of their occurrence.
- Efficient converter with a power of ~150 W that enables insulation burnout, allowing for pinpointing the location of cables and wires short circuit using one of the following:
- visual method (if power cables are visible along the entire length),
- reflectometric methods, seismic-acoustic waves detector, or with A-frame to indicate direction of the fault (the conductor must be buried in the ground with earth direct contact).
- Compatible with external software.
₨0
1 in stock
CompareMIC-15k1 meter is designed to measure insulation resistance of power objects, i.e.:
- single- and multicore cables,
- transformers,
- motors and generators,
- capacitors, switches and other devices installed in power stations.
It is especially recommended for measurements in areas with very high electromagnetic disturbances, e.g. electrical substations with 1200 kV AC and 500 kV DC. Thanks to the 15 kV measuring voltage (in accordance with ANSI / NETA ATS-2009 TABLES 100.1) the meter can be used for measuring objects with a nominal voltage above 34.5 kV.
| Weight | 6.3 kg |
|---|---|
| Dimensions | 39 × 31 × 17 cm |
Insulation resistance measurement
Measuring range according to IEC 61557-2
UN = 15 000 V: 50 kΩ…40.0 TΩ
Measurement with DC and increasing voltage (SV) for UISO = 15 kV
| Range | Resolution | Accuracy |
|---|---|---|
| 0,0…999 kΩ | 1 kΩ | ±(3% m.v. + 10 digits) |
| 1,00…9,99 MΩ | 0,01 MΩ | ±(3% m.v. + 10 digits) |
| 10,0…99,9 MΩ | 0,1 MΩ | ±(3% m.v. + 10 digits) |
| 100…999 MΩ | 1 MΩ | ±(3% m.v. + 10 digits) |
| 1,00…9,99 GΩ | 0,01 GΩ | ±(3% m.v. + 10 digits) |
| 10,0…99,9 GΩ | 0,1 GΩ | ±(3% m.v. + 10 digits) |
| 100…999 GΩ | 1 GΩ | ±(3,5% m.v. + 10 digits) |
| 1,00…9,99 TΩ | 0,01 TΩ | ±(7,5% m.v. + 10 digits) |
| 10,0…20,0 TΩ | 0,1 TΩ | ±(12,5% m.v. + 10 digits) |
| 10,0…40,0 TΩ | 0,1 TΩ | ±(12,5% m.v. + 10 digits) |
Ranges of measured resistance depending on the test voltage
| Voltage UISO | Measuring range |
|---|---|
| 50 V | 200 GΩ |
| 100 V | 400 GΩ |
| 250 V | 1,00 TΩ |
| 500 V | 2,00 TΩ |
| 1000 V | 4,00 TΩ |
| 2500 V | 10,00 TΩ |
| 5000 V | 20,0 TΩ |
| 10 000 V | 40,0 TΩ |
| 15 000 V | 40,0 TΩ |
Capacitance measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 0…999 nF | 1 nF | ±(5% m.v. + 5 digits) |
| 1,00…49,99 µF | 0,01 µF | ±(5% m.v. + 5 digits) |
- Displaying measured capacity after RISO measurement
- For measurement voltages below 100 V the measurement error is not specified
Technical specification
- type of insulation acc. to: EN 61010-1 and IEC 61557 double
- measurement category acc. to EN 61010-1
- IV 1000 V (operating altitude ≤2000 m)
- IV 600 V (operating altitude ≤3000 m)
- ingress protection acc. to EN 60529: IP67 (IP40 for closed case)
- resistance to external interference voltages: up to 1550 V
- resistance to external interference currents: up to 10 mA
- advanced, digital filtering of interferences: 10 / 30 / 60 / 100 / 200 seconds
- test leads lock: yes
- power supply: Li-Ion 14.8 V rechargeable battery from network 90 V ÷ 260 V, 50 Hz/60 Hz
- dimensions: 390 x 308 x 172 mm
- weight: approx. 6.3 kg
- storage temperature: -25ºC…+70ºC
- operating temperature: -20ºC…+50ºC
- humidity: 20%…90%
- operating altitude: ≤3000 m
- reference temperature: +23ºC ± 2ºC
- reference humidity: 40%…60%
- display: graphical LCD
- number of RISO measurements with battery power supply: min. 1000 acc. to EN 61557-2
- data transmission: USB and Bluetooth
- quality standard: ISO 9001 compliant
- device meets the requirements of standards: EN 61010-1 and IEC 61557
- the product meets EMC requirements (immunity for industrial environment) with accordance to standards: EN 61326-1 and EN 61326-2-2
Brand
SONEL
Based on 0 reviews
Be the first to review “MIC-15k1 ,15kV Insulation Quality Analyzer”
-
Multimeters
CMM-10 Multimeter
- Autoranging/manual range selection.
- DATA HOLD function, for holding measured values.
- REL function, which allows you to make measurements relative to a stored reference value.
- Continuity test with acoustic signalling (beeper).
- AUTO-OFF function.
- Display 3 7/8 digits (5000 max).
SKU: n/a -
Clamp Meters
UT219DS ACA DCA Professional Clamp Meters with Motor LPF Test
- UT-219 professional clamp meter series is three-proofing digital clamp meter specially designed for professional industrial users.
- The industrial design of this series is rugged and durable, and capable of withstanding the impact from 2 meters fall-down.
- The waterproof rating is up to IP54; therefore, it can be used in environment with water splashing or much more dust.
- The whole series is configured with LoZ (Low Impedance Input) AC voltage tap position, which is capable of testing the false voltage; auto backlight function can be used continuously under the circumstance of emergency power outage.
- UT-219DS is also provided with MOTOR test function, allowing to directly test the phase sequence of three phase AC motor by means of the probe. UT-219 series is much more in compliance with CAT IV 600V safety level, and certified by the German GS institution.
SKU: n/a -
-
Rework & Soldering Station
YIHUA 937D Repairing Soldering Iron
Standard Configuration
Main unit 1set
Soldering iron handle (include iron tips and heater) 1pc
Iron holder 1pc
High temperature resistant sponge 1pc
Manual 1pc
Power plug :1pc
Application Scope
Production lines for electronic products ,.
2. Repair industry for moblie phone.
3. SMD components requiring the highest precision.
SKU: n/a -
Clamp Meters
CLAMP METER AC BM 5266
Features: 1. 1999 Counts and All-In-One: It can display 1999 counts and measure ac/dc voltage, ac current, resistance, capacitance, phase, diode and continuity tests. 2. Clear to Read: With large LCD display and data hold function, easy to read and record data. 3. Wide Application Range: It is a perfect tool for laboratory, factory, home and other fields. 4. Easy to Read: With large LCD display and data hold function, easy to read and record data. 5. More advantages: data retention, low battery indication, auto power off and auto negative indication. Description: 1. This BM5266 is a portable digital clamp meter, high reliability, high accuracy and portability, a perfect tool for laboratory, factory, home and other fields. 2. Can measure ac/dc voltage, ac current, resistance, capacitance, phase, diode and continuity tests. 3. More advantages such as data retention, low battery indication, auto power off and auto negative indication. Specifications: Model Number: bm5266 Display: 1999 counts Low battery indication: yes Automatic negative indication: yes Continuity test: yes DC voltage: 600v ±(0.5% 5) AC current: 2a/20a/600a ±(1.9% 10) Capacitance: 200uf ±(3.0% 5) Product Size: 195x63x34mm Color: gray and red Data retention: yes Auto power off: yes Diode test: yes Phase test: yes AC voltage: 600v ±(1.2% 5) Resistance: 2000unf/2mψ ±(0.8% 5) Power supply: 9v 6f22 battery (not included) Product weight: 183g package information: Package Size: 20.5x9.5x4cm / 8.1x3.7x1.6in. Package weight: 290g / 10.7oz Package list: 1 x bm5266 digital cuff gauge 2 x test pen cable 1x User ManualSKU: n/a
Related products
-
Insulation Tester
Insulation Resistance Testers UT512
UT510 series is a kind of intelligent insulation tester. The device circuit design takes microcomputer technology design as the core and combines the large scale integrated circuit with digit circuit. It is equipped with strong measuring software and data processing software. It is applied to the parameter measurement of insulation resistance, voltage and low resistance. It has stable performance and simple operation. It is applicable to on-site measurement and repair of the electrical equipment and charging line. It is the ideal tool of maintaining electrical equipment. It is also used for smelting, communication, manufacture, fossil oil, national defense, electricity, chemical industry and circuit.
SKU: n/a -
Insulation Tester
JM Z16 HEAT INSULATION MAT
JAKEMY JM-Z16 Magnetic Heat Insulation Silicone anti-static Working Mat for Soldering Assembling Electronics DIY Repair.
Feature:
Brand new and high quality.
Heat-resistant coefficient: 300 Celcius degree (hot wind) / 230 Celcius degree (direct contact).
Anti-static coefficient: 1*10E12ohm.
Units design, easy to keep track of parts.
Food grade material, non-toxic and safe in use. 6. Suitable for electronics devices repairing.Accessories:
Anti-static and heat-proof working mat*1SKU: n/a -
Insulation Tester
MIC-5001, 5000V Insulation Tester
Insulation resistance measurement in a compact, light-weight, low-cost design.
- Measurement to 5 TΩ
- Measuring voltage selectable from 50 V to 500 V range in 50 V steps, and from 500 V to 5000 V range in 100 V steps
- Continuous indication of insulation resistance or leakage current
- Automatic discharge of stored charge due to capacitance of tested object after the insulation resistance measurement
- Audio beeps every five seconds to alert user test is proceeding, and to get time characteristics
- Measured test times of T1, T2 and T3 for measuring Absorption Coefficient, Dielectric Absorption Ratio DAR. and Polarization Index PI
- Continuous display of test voltage during the measurement
- Protection against measuring live objects
- Two and three-lead measurement method
- Ramp Test Insulation resistance measurement
- Measurement of breakdown voltage with increments up to 1 kV / s
- Measurement of alternating and direct voltages from 0 V to 750 V
- 990 cells of memory (11880 records) to record results
- Data transfer to PC via USB cable
- Built-in rechargeable battery pack
- Meets the requirements of the EN 61557 standard
- Charge from optional car lighter (12 V) socket accessory
SKU: n/a
There are no reviews yet.