-5%

UT120B Pocket Size Type Digital Multimeters

Availability:

19 in stock


Main Features

1. Auto range

2. Auto polarity indication

3. Relative mode

4. Data hold

5. Auto power off

6. Capacitance measurement

7. Complies with CE (European Union) directives

4,620 4,878

19 in stock

Compare

Main Features

1. Auto range

2. Auto polarity indication

3. Relative mode

4. Data hold

5. Auto power off

6. Capacitance measurement

7. Complies with CE (European Union) directives

Category:
Weight 0.1 kg
Dimensions 11 × 6 × 11 cm
Specifications Range Best Accuracy
Model UT120B 
DC Voltage (V) 4V/40V/400V/600V ±(0.8%+3)
AC Voltage (V) 4V/40V/400V/600V ±(1.2%+3)
Resistance (Ω) 400Ω/4KΩ/40KΩ/400KΩ/4MΩ/40MΩ ±(1%+2)
Capacitance (F) 4nF/40nF/400nF/4μF/40μF/100μF ±(4%+3)
Frequency (Hz) 99.99Hz~99.99KHz ±(0.5%+3)
Features
Display Count 4000
Auto Range
Duty Cycle 0.1%~99.9%
Diode
Auto Power Off Around 30 Minutes
Continuity Buzzer
Low Battery Indication ≤2.4V
Data Hold
Relative Mode
Input Impedance for DCV Around 10MΩ
General Characteristic 
Power 3V Battery(CR2032)
LCD Size 43mm X 22mm
Product Color Red and Grey
Product Net Weight 76g
Product Size 110mm X 58.2mm X 10.8mm
Standard Accessories Battery,Carrying Case
Standard Individual Packing Blister, English Manual
Standard Quantity Per Carton 90 PCs
Standard Carton Measurement 528mm X 323mm X 400mm (0.068 CBM Per Export Carton)
Standard Carton Gross Weight 13.5 Kg

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT120B Pocket Size Type Digital Multimeters”

There are no reviews yet.

  • YH 134A 60 HEATER

    0 out of 5
    (0)
    SKU: n/a
  • UT309C Professional Infrared Thermometer

    0 out of 5
    (0)

    Features

    1. 3m drop proof, IP65

    2. Large LED display with backlight

    3. MAX/MIN/AVG/DIF mode

    4. High/Low temperature alarm with LED indication

    5. Dual laser measurement to enhance accuracy

    6. Lock measurement

    7. Adjustable emissivity: adjust according to different testing materials

    8. Data hold, auto power off function

    SKU: n/a
  • UT658 DUAL USB Testers

    0 out of 5
    (0)

    Features of UT658 Series USB Testers

    Certifications: CE, UKCA

    ● Type-A/C interface

    ● CE certification

    ● 10 sets of data storage

    ● Loop equivalent resistance measurement (1-480Ω)

    ● Same screen shows voltage, current, power, capacity, etc.

    ● Support fast charge protocol

    SKU: n/a
  • SVC 2000VA

    0 out of 5
    (0)

    Input=120V 270
    Output=220
    Under and Over Volt Protection
    Surge Protection
    Over Load and Heat Protection
    Copper Wind with LCD Display

    SKU: n/a
  • TDR-420 Time Domain Reflectometer/ Cable Fault Locator

    0 out of 5
    (0)

    Product features

    • Possibility damage-free location of impedance changes of tested cables and wires such as:
      • shorted conductor,
      • open conductor / end of cable – useful during the inventory of warehouses and stores,
      • splice,
      • splitter,
      • water ingress,
      • wet splice,
      • bridge tap
      • or other changes.
    • Single measurement mode ONCE,
    • Continuously measurement mode CONT,
    • Tone signal generator TONE,
    • Two cursors to mark two places of damage along with an indication of the distance between them,
    • Built-in HELP function for easier interpretation of the reflectogram,
    • 11 available measuring ranges from 7 m to 6000 m,
    • „dead zone” limited to 0.6 m,
    • Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
    • manually set of sensitivity in 8 steps GAIN,
    • output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
    • Velocity of Propagation set in range from 10% to 99%,
    • tight and durable housing with IP67 ingress protection degree.
    • Small size and weight.
    SKU: n/a