-
×
JM-8159 34 In 1 Precision Small Screwdriver
- Vendor:
superworld
Subtotal: ₨1,352
Power Quality Analyzer
PQM-707 Power Quality Analyzer
-
Features:
- 7″ touch screen – intuitive operating
- CAT IV 600V – high safety
- all parameters acc. to class S – high accuracy of measurements
- Li-Ion rechargeable battery – higher mobility
- removable memory card – recording data with no restrictions
Possible measurements:
- Measurements according to EN 50160,
- Voltage L1, L2, L3, N-PE (five inputs),
– average, minimum, maximum values, range to 760 V, ability to work with voltage transformers, - Current L1, L2, L3, N (four inputs),
– average, minimum, maximum values, measurement current with range to 3 kA (depends on used clamp), ability to work with current transformers, - Crest factor for voltage and current,
- Frequency from 40 Hz to 70 Hz ,
- Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive),
- Power recording:
- Budeanu method,
- IEEE 1459,
- Active, reactive, apparent energy,
- Power factor, cosφ, tgφ,
- Up to 50th harmonics for voltage and current,
- Total Harmonic Distortion (THD) for voltage and current,
- Short-term (PST) and long-term (PLT) flicker,
- Unbalance of voltage and current,
- Current and voltage events registration including waveforms and RMS graphs half period,
- Inrush current
- Calculator of energy tariffs
- ANALYZER MEASURES AND RECORDS ACCORDING TO THE IEC 61000-4-30 CLASS S STANDARD.
₨0
ComparePower Quality Analyzer Sonel PQM-707 is an autonomous meter allowing for versatile measurement, analysis, and registration of energy networks parameters DC and 50/60Hz, including the quality of electric energy in accordance with the European standard EN 50160 and the Regulation of the Minister of Economy on detailed conditions of the electro-energetic system functioning. All parameters are measured in the S class of the IEC 61000-4-30 STANDARD guaranteeing high accuracy of measurements.
The largest in this class of analyzers 7-inch colour touch screen enables intuitive and ergonomic operation. Thanks to the built-in lithium-ion battery, the analyzer allows for efficient work during the measurement without the necessity of connecting an external AC adapter.
The analyzer is directed to a very wide range of users, with particular reference to the maintenance staff. Due to its mobility and autonomy, any problems occurring in the supply networks can be diagnosed on the spot. High measurement category (CAT IV 600V) makes the analyzer very safe, which provides peace of mind during every day use.
The analyzer can be used in virtually all kinds of networks with rated voltage from 54V to 760V directly, or indirectly via transformers.
Because of that PQM-707 can be used in the field of professional power engineering, maintenance services in industrial plants, as well as among those providing services focused on network analysis.
Accessories:
- Test leads 2.2 m
- Mains cable with IEC C7 plug
- Crocodile clips, black,yellow,red,blue.
- Power supply adaptor Z7
- USB Transmission Cable
- Carrying Case
- F-3A flexible clamps (Φ=120 mm)
- AC-16 line Splitter
- AZ-2 Power Supply Adaptor
- Cable for Battery
- Magnetic voltage adapter (set – 4 pcs)
The device is designed to work with networks:
- with nominal frequency 50/60 Hz,
- with nominal voltage: 64/110 V; 110/190 V; 115/200 V; 127/220 V; 220/380 V; 230/400 V; 240/415 V; 254/440 V; 290/500 V; 400/690 V.
- DC network
Supported networks:
- single-phase,
- two-phase with common N conductor,
- three-phase star connection with and without N conductor,
- three-phase delta.
-
Parameters of analyzer:
Parametr Parametr Measurement range Max. resolution Accuracy Alternating voltage (TRMS) – 0,0…760,0 V 0,01 % Unom ±0,5% Unom Crest Factor Voltage 1,00…10,00 (≤1.65 for 690 V voltage) 0,01 ±5% Crest Factor Current 1,00…10,00 (≤3,6 Inom) 0,01 ± 5%wm Alternating current TRMS – depending on clamp* 0,01 % Inom ±2% m.v. for m.v. ≥ 10% Inom ±2% Inom for m.v. < 10% Inom(error does not account for clamps error) Frequency – 40,00…70,00 Hz 0,01 Hz ±0,05 Hz Active, reactive, apparent and distortion power – depending of configuration (trasformers, clamp) up to for decimal places depending on configuration (transformers, clamps) Active, reactive apparent energy – depending of configuration (transformers, clamp) up to for decimal places as power error cosφ and power factor (PF) – 0,00…1,00 0,01 ±0,03 Tgφ – 0,00…10,00 0,01 depends on active and reactive power error Harmonics Voltage as for alternating voltage True RMS as for alternating voltage True RMS ±5% m.v. for m.v. ≥ 3% Unom ±0,15% Unom for m.v.. < 3% Unom Harmonics Current as for alternating voltage True RMS as for alternating voltage True RMS ±5% m.v. for m.v.. ≥ 10% Inom ±0,5% Inom for m.v. < 10% Inom THD Voltage 0.0..100.0% （in regards to the rms value） 0,1% ±5% THD Current 0.0..100.0% （in regards to the rms value） 0,1% ±5% Flicker severity PST, PLT – 0,40…10,00 0,01 ±10% Voltage asymmetry Voltage and current 0,0…10,0% 0,1% ±0,15% (absolute error) Inrush current – depending on clamp* 0,01% Inom ±4% m.v. for m.v. ≥ 10% Inom ±4% Inom for m.v. < 10% Inom(RMS1/2) *Clamp F-1A, F-2A, F-3A: 0..3000 A (10000 Ap-p)
*Clamp C-4A: 0..1000 A (3600 Ap-p)
*Clamp C-5A: 0..1000 A (3600 Ap-p)
*Clamp C-6A: 0..10 A (36 Ap-p)
*Clamp C-7A: 0…100 A (360 Ap-p)
Brand
SONEL
Based on 0 reviews
Be the first to review “PQM-707 Power Quality Analyzer”
-
Voltage Detector
UT12M-US AC Voltage Detector
features:
1. Auto power off
2. Buzzer
3. LED indication
4. IP 67
5. AC voltagedetection
6. High/Lowvoltage mode
7. Magnetic solenoiddetectionApplications:
Low voltage mode: Low-voltage motor (<90V), audio systems, arc welding machines,underground mining lighting, cables with thick insulation layer and other weakelectromagnetic AC signals.
High voltage mode: Urban electric supply and three-phase systems (90~1000V). Forexample, power distribution units, electrical panels, electrical appliances.SKU: n/a -
Clamp Meters
AC/DC DIGITAL CLAMP METER KEW 2056R
• Designed to meet international safety standard IEC 61010-1 CAT IV 600V.
• CAT IV Clamp Meters can measure the Voltage and Current in both every low and high power circuits.
• Very useful for power distribution companies, power utilities and maintenance fields.
• True RMS enables an accurate measurement.SKU: n/a -
Oscilloscopes
UPO2102CS Ultra Phosphor Oscilloscope
Features and Benefits:
1、Sample Rate up to 1GS/s；
2、Channels 2/；
3、Bandwidth 100MHz，；
4、Memory Depth 32Mpts(Standard)；
5、Waveform Capture Rate up to 30,000wfms/s；
6、With 256 level intensity grading display；
7、Up to 65,000 frames for Waveform Record ,Replay；
8、Support serial bus trigger and decoding；
9、8 inches, TFT LCD，WVGA(800*480)；
10、Interface：USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.
SKU: UT21P02CSO
Related products
-
Power Quality Analyzer
UT283A Single Phase Power Quality Analyzer
1. Trend/event capture
2. Harmonics/inrush current measurement3. File management through USB interface4. Flick measure (PST/PLT values)5. User friendly interface6. Multimeter functions7. Scope functions including waveform display8. 3.5 inches 64K color TFT LCD display9. THD (Total Harmonic Distortion) function10.Long-term monitoringSKU: n/a -
Power Quality Analyzer
UT285C Three Phase Power Quality Analyzer
1. Waveform real-time display (4 channels voltage/4 channels current).
2. True RMS values of voltages and currents3. Peak current and voltage values4. Total harmonic distortion (THD)5. Active, reactive, apparent power, by phase and cumulative6. Transformer K factor7. Power factors (PF) and displacement factors (DPF or COSΦ)8. Short-term voltage flicker (PST)9. Three phase unbalance(current and voltage)10. USB interface/PC softwareSKU: n/a
There are no reviews yet.