- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
₨20,400 ₨22,111
Weight | 4 kg |
---|---|
Dimensions | 25 × 19 × 14 cm |
Technical data:
Rated voltage: AC 220V±10% 50HZ ( 110V±10% 50HZ)
Whole machine Power Consumption: ≤800W
Work environment: 0-50°C
Iron parts |
Gun parts |
DC power supply partsA |
work Voltage :AC:26V±10% 50HZ |
work Voltage: AC:220V±10% 50HZ\( 110V±10% 50HZ) |
work Voltage:AC 220V±10% 50HZ\ ( 110V±10% 50HZ) |
Output power:50W±10% |
Output power:600W±10% |
Output power:15W/30W |
Temperature range:200°C-480°C |
Temperature range:100°C-480°C |
Output voltage:0-15V |
Temperature stability:±2°C |
Temperature stability:±2°C |
Load stability:<0.01±2mv |
Tip of ground impedance<2ohm |
Gun type:Diaphragm pump
Airflow is focus on it,24L~28L/Min |
recovery time:<100us |
Tip of ground voltage: <2mV | Gun heater resistance:90Ω |
Ripple dB<1mvrms (virtual value) |
Iron Heater material: Common heater |
Gun heater material:Nickel-alloys |
Temperature coefficient:<300PPm/°C |
Iron handle:Black handle |
Protection starting current:>standard value 10% |
Based on 0 reviews
Be the first to review “YH 853D 2A Rework Station All IN 1”
-
Clamp Meters
UT 208 CLAMP METER
1. 1000A AC/DC current measurement, 3 times/s sampling rate
2. True RMS3. Inrush current4. Zeroing function5. Full icon display6. MAX/MIN7. Data hold; Duty cycle8. Auto power off and low battery indication9. Point contact temperature probe10. Diode; Continuity buzzer; Input Impedance for DCVSKU: n/a -
SMD Tester
UT 116C SMD Tester
Specifications Model UT116C Display count 6000 Resistance 60MΩ Capacitance 100mF Diode test 3.2V LED/stabilivolt About 21V/1mA Continuity Test <50Ω Battery test Load current ≈ 10mA Auto range √ Auto power off √ General Characteristics Power 1.5V battery (R03) x 2 Display 39mm x 20mm Product color Red and grey Product net weight About 80g Product size 204mm x 33mm x 25mm Standard accessories Battery . SKU: n/a -
-
DC Power Supplies
YH 1502D+ DC POWER SUPPLY
Parameters
Rated voltage AC220V±10% 50Hz Operating environment 0~40℃ relative humidity<80% Storage temperature -20~80℃ relative humidity<80% Dimensions of the machine body 27*14*22cm Weight 1.9KG Performance parameters Output voltage Adjustable continuously within 0~15V Output current Adjustable continuously within 0~2A (current limitation adjustment when above 0.2A) Output power 15W Source effect ≤1mV Load effect ≤0.33% Ripple noise ≤3mVrms(5Hz ~ 1MHz)/≤3mArms Display accuracy 0.1V/0.1A/1mA Protection mode Over-current, short circuit, over-temperature protection Dissipation mode Air cooling SKU: n/a -
Arbitary Waveform Generator
UTG962E Function/Arbitrary Waveform Generator
Specifications Model UTG962E Channel 2 Max frequency 60MHz Sampling rate 200MS/s Vertical resolution 14 bits Waveforms Sine, square, pulse, ramp, noise, DC, arbitrary Sweep modes Logarithmic, linear Frequency Characteristics Sine 1μHz~60MHz Square 1μHz~20MHz Ramp 1μHz~400kHz Pulse 1μHz~20MHz Arbitrary 1μHz~10MHz Resolution 1μHz Accuracy Within 90 days ± 50ppm Within 1 year ± 100ppm 18℃~28℃ Output Characteristics Impedance 50Ω/High Z Amplitude range 1mVpp~10Vpp (50Ω); 2mVpp~20Vpp (high Z) DC offset range (AC+DC) ±5V (50Ω); ±10V (high Z) Amplitude resolution 1mV General Characterisitics Power 100~240VAC, 50Hz/60Hz Display 4.3”TFT LCD (480×272) Product color White and grey Product net weight 0.33kg Product size 172mm x 90mm x 68mm Standard accessories USB interface cable, power cord, BNC cable with alligator clips Standard individual packing Carton box Standard quantity per carton 4pcs Standard carton measurement 435mm x 360mm x 125mm Standard carton gross weight 3.8kg SKU: n/a -
DC Power Supplies
UTP1305 DC Power Supply
Specifications Model UTP1305 Output voltage 0~32V Output current 0~5A Load regulation CV≤1×10-4 +3mV, CC≤2×10-4 +3mA Ripple and noise ≤1mVrms Output regulation resolution CV: 100mV (typical), CC: 10mA (typical) Reliability MTBF(e): ≥2000hrs Display mode LED voltage and current dual display Feature Auto conversion of constant voltage and current with current limit protection General Characteristics Power Input voltage: 115V AC/230V AC;
frequency: 47Hz~63HzProduct color White and grey Product net weight 5kg Product size 145mm x 175mm x 284mm Standard accessories Power cord, output cables Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 430mm x 400mm x 255mm Standard carton gross weight 13kg SKU: n/a
There are no reviews yet.