-
×
YH 947-II Soldering Iron
- Vendor:
Subtotal: ₨1,500
-13%
Rework & Soldering Station
YH 938BD+ DUAL SMD STATION
| MODEL | 938BD+ |
| Power consumption | 135W |
| Temperature Range | 100°C~480°C/212°F~896°F |
| Display type | LCD |
| Temperature stability | ±2°C/3.6°F (static) |
| Heater voltage | AC 24V ±10% 50Hz |
| Sleep Function | 0-99 Minutes |
| Temperature Compensation Programmable | -50 °C to +50 °C |
| Working Environment | 0~40°C/32°F~104°F |
| Storage Environment | -20°C ~ 80°C/-4°F ~ 176°F |
| Soldering Iron & Hot Tweezers Cord Material | 100% Silicone (Virtually No Memory) |
₨17,160 ₨19,743
1.The machine has been upgraded with a new backlit panel using the newest LCD technology, offering a
beautiful and elegant look, and accurately displaying the temperature of the tweezers and soldering iron as
well as other functions.
2.Adopt microcomputer control, warming-up quickly.
3.High-quality resistance good for long service life.
4.This product is ESD-protected.
5.soldering iron handle using silicone material.
6.The machine uses brushed aluminum panels, which as well as looking attractive, are also compact and
space-saving.
7.Uses PID programmable temperature control technology, applying sophisticated PID programming into
the machine to rapidly track, test, and correct the actual temperatures of the tweezers and soldering iron.
Rapid temperature compensation reduces temperature error. Temperature stability and temperature
compensation speed are significantly better than similar products.
8.Internal design uses SMT double-sided panels, producing a neat arrangement;
signal flow is clear, and the stability and operational safety of the machine has been further strengthened.
The machine can be used in a number of harsh environments.
9.Longer soldering iron handle line, it has 1.5 meter.
10.The handle for the soldering tweezers has a unique design, and is paired with a unique soldering iron
stand. The soldering tweezer station is ideal for use soldering small plates and small IC. Due to its parallel
design, the soldering tweezer station ,can be heated and used for soldering at the same time.
11.Unique handle model and soldering iron holder humanity design.
12.938BD+ Series provides parallel heating tweezers and soldering irons in a combination design, making
it very convenient for use in applications such as for small electronic components, chips, and SMD
component desoldering and soldering. When desoldering is necessary, the parallel tweezers can be placed
directly on the two solder points of the resistor components for heating. Components can be easily
desoldered without affecting nearby components. Also the soldering iron can quickly resolder components
that have been desoldered. Extremely quick and easy to use, providing the best combination for instillation
and desoldering.
| Weight | 2 kg |
|---|---|
| Dimensions | 15 × 14 × 9 cm |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 938BD+ DUAL SMD STATION”
-
Rework & Soldering Station
YH 706 REWORK STATION
Model 706 872D+ Power Consumption 720W 720W Measurement 124*187*157MM 124*187*157MM Weight 4.5KG 4.8KG Working environment 0~50°C 0~50°C/0~122°F Storage environment -20-80°C -20-80°C Hot Air Reworks Airflow type dual-turbo blower diaphragm pump spiral wind Air Flow ≤168L/min ≤24L/min Temperature Range 100°C-480°C 100°C-480°C Temperature Stability ±1°C ±1°C Display Type Digital Display Digital Display Handle length ≥90CM ≥90CM Soldering Iron Temperature Range 200°C-480°C 200°C-480°C Temperature Stability ±2°C ±2°C Tip of ground voltage <2mv<> <2mv<> Tip ground impedance <2 ohm <2 ohm Display Type Digital Display Digital Display Handle length ≥100CM ≥100CM SKU: n/a -
Multimeters
UT17B PRO Digital Multimeter
Specifications Range UT17B PRO Certifications CE/RoHS/cETLus Safety ratings CAT III 1000V/CAT IV 600V DC voltage (V) 1000V ±(0.5%+3) AC voltage (V) 1000V ±(1%+3) AC current (A) 10A ±(1%+3) DC current (A) 10A ±(0.8%+3) Resistance (Ω) 60MΩ ±(0.5%+2) Capacitance (F) 6000μF ±(2%+5) Frequency (Hz) 10Hz~100kHz ±(0.1%+3) Duty cycle 1%~99% ±(1%+4) Temperature (°C/℉) -55℃~500℃/-67℉~932℉ ±(2%+1) Display count 6000 AC frequency response 40~500Hz General Characteristics Power 1.5V battery (LR6) x 2 Product net weight 484g Product size 195mm x 95mm x 58mm Standard accessories English manual, test lead, temperature probe Standard individual packing Gift box, cloth bag Standard quantity per carton 10pcs Standard carton measurement 505mm x 355mm x 205mm Standard carton gross weight 9.1kg SKU: n/a -
DC Power Supplies
UTP 3305C DC POWER SUPPLY
Specifications Model UTP3305C Output voltage 0~30V (CH1/CH2) Output current 0~5A (CH1/CH2) Output power 315W Load regulation Voltage <0.01%+5mV Current <0.1%+10mA Line regulation Voltage <0.01%+3mV Current <0.1%+3mA Resolution Voltage 10mV Current 1mA Accuracy (25℃±5℃) Voltage <0.5%+20mV Current <0.5%+10mA Ripple (20Hz~20MHz) Voltage ≤2mVrms Current ≤3mArms Output temperature
coefficientVoltage ≤150ppm Current ≤150ppm Voltage rise delay ≤100ms (10% rated load) Parallel/Series load regulation ≤0.1%+0.1V CH3 output features Voltage 5V Current 3A Voltage accuracy ±50mV Load regulation ±50mV Interfaces USB Device, RS-232 General Characteristics Power AC 100V/120V/220V/230V±10%, 50Hz/60Hz Display 4 windows, LED Product net weight 9.1kg Product size 260mm x 176mm x 317mm Standard accessories USB and RS-232 interface cables, output cables Standard individual packing Carton box Standard quantity per carton 1pcs Standard carton measurement 440mm x 388mm x 295mm Standard carton gross weight 10kg SKU: n/a -
Wire & Cable Testers
UT18D Voltage and Continuity Tester
1. Auto power off, the conductor to be measured is greater than 12V
2. Phase rotation test3. Continuity test with buzzer and LED indication4. Low battery indication and over voltage prompt5. Flashlight6. Test live voltage without batteries7. Buzzer and silent modes available8. Auto range9. Polarity indicationSKU: n/a -
DC Power Supplies
YH 1502DD DC POWER SUPPLY
Parameters
Rated voltage AC220V±10% 50Hz Power of complete machine 15W Operating environment 0～40℃ relative humidity＜80％ Storage temperature －20～80℃ relative humidity＜80％ Dimensions of the machine body 17*21*16.5cm Weight 1.61KG Performance parameters Output voltage Adjustable continuously within 0～15V Output current Adjustable continuously within 0～1A (current limitation adjustment when above 0.2A) Output power 15W Source effect ≤1mV Load effect ≤0.33% Ripple noise ≤3mVrms（5Hz ~ 1MHz）/≤3mArms Display accuracy 0.1V/0.1A/1mA Protection mode Over-current, short circuit, over-temperature protection SKU: n/a -
Clamp Meters
UT 208 CLAMP METER
1. 1000A AC/DC current measurement, 3 times/s sampling rate
2. True RMS3. Inrush current4. Zeroing function5. Full icon display6. MAX/MIN7. Data hold; Duty cycle8. Auto power off and low battery indication9. Point contact temperature probe10. Diode; Continuity buzzer; Input Impedance for DCVSKU: n/a
Related products
-
Rework & Soldering Station, Touch Seperator
YH 946A-III Touch Seperator
1. With PID programmable temperature control technology and the highest precision PID input program, temperature is both adjustable and stable while deviations are minimized.
2. The heated aluminum is smooth and flat, ensuring a uniform surface temperature.
3. This device has the following user-friendly design features:A. Celsius/Fahrenheit temperature display;B. Temperature correction feature.
4. The double-sided internal SMT manufacturing process boasts clean craftsmanship. The signal flow is clear, and the machine is both stable and safe, further improving its performance and adaptability to various harsh environments.
SKU: n/a -
Rework & Soldering Station
YH 938D SMD STATION
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.SKU: n/a -
Rework & Soldering Station
YH 939BD+ SOLDERING STATION
MODEL 939BD+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode Red LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a -
Rework & Soldering Station
YIHUA 908D-II LED DIGITAL THERMOSTAT ELECTRONIC SOLDERING IRON
1.Portable anti-static thermostat soldering iron, using latest advanced temperature control circuit for precise temperature control.
2.Heating core uses high quality and durable materials, extending its service life.
3.The handle uses completely new environmentally friendly and heat resistant materials.
A high temperature spacer between the handle and the heating tube prevents heat
transfer and ensures comfortable use.4.LED digital display, allowing users to directly monitor the temperature and making
soldering work easier.5.It is equipped with a lock temperature switch. When it is opened to the lock temperature
state, the temperature is not adjustable; when the switch is turned to the unlocked state,
the temperature adjustment is resumed.6.The 908D is an upgraded version of the 908D, featuring the 908D, with digital temperature
correction, 0/510/30 minute sleep, and Fahrenheit/Celsius display conversion.SKU: n/a
There are no reviews yet.