-
×
YH 946A-III Touch Seperator
- Vendor:
Subtotal: ₨18,500
-20%
Rework & Soldering Station
YIHUA 850 Hot Air Heat Gun Rework Station
Availability:
Out of stock
Application
Applicable to desoldering of several types of elements: SOIC, CHIP, QFP, PLCC, BGA; the smaller the gun nozzle, the stronger of the force; suitable for desoldering of single soldering spots.
₨6,317 ₨7,897
Out of stock
CompareYH-850 Diaphragm pump hot air desoldering station
Product Features
1.Fine-control diaphragm pump is employed for powerful airflows; the smaller the nozzle of the gun, the stronger the airflow.
(a) Nozzles with diameters smaller than 5 mm and normal-sized nozzle (8 mm, 10 mm, 12mm) are suitable for use, we do not recommend use with larger nozzles. Since the pressure of the air pump is large, the smaller the nozzle the stronger the force, and even small nozzles are able to blow out the hot air from the handle.
(b) Characteristics of the diaphragm pump type airflow: large pressure and small volume (the maximum volume is 24 or 28 L/min)
(c) Applicable range:
The smaller the gun nozzle installed in the machine, the bigger the pressure and stronger the force, suitable for desoldering of single small soldering spots.
2.a cutting-edge ceramic-framed heating core for extremely stable and reliable performance!
3.The air gun handle wire employs a high-temperature silicone wire (undamaged when 300o soldering tip contacts silicone wire for 30 seconds)
| Weight | 3 kg |
|---|---|
| Dimensions | 26 × 19 × 13 cm |
Product parameters
| Performance Parameters of the Machine | |
| Rated Voltage | AC 220V±10% 50Hz |
| Total Power | 550W |
| working condition | 0～40℃ relative humidity ＜80％ |
| Operating Environment | －20～80℃ relative humidity ＜80％ |
| Dimensions | 255*188*125mm |
| Weight | 3.3KG |
| Temperature Range | 100℃～450℃ |
| air supply mode | Pump air supply |
| Air Flow | 24L/min(Max) |
| Temperature stability | ±15℃ （static state） |
| Heating element | Ceramic skeleton heater |
standard configuration
Desoldering station 1 Manual : 1
Air gun handle 1 Nozzle:3（5mm 8mm 10mm）
IC extractor 1 Holder 1
Brand
YIHUA
Based on 0 reviews
Be the first to review “YIHUA 850 Hot Air Heat Gun Rework Station”
-
Digital Micro Ohm Meter
UT620A Digital Micro Ohm Meter
Features of UT620A Digital Micro Ohm Meter
● Comparison measurement with upper and lower limits● Wire length measurement (m/ft)● Built-in Lithium battery● 1000-group data storage● Improved measurement method which improves accuracy by counter-balancing contact resistance of leads● Data transmission between USB and PC● Data hold● LCD backlight● Zeroing function, relative mode● IND resistance measurement modeSKU: n/a -
Laser Distance Meters
UT395C Professional Laser Distance Meter
UT395 series are professional laser distance meters with color LCD display, electronic multi-axis leveler and other special features. Its unique operating system, friendly user interface, and personalized settings option all make these devices the perfect choice for professional distance measurement.
SKU: UN39C5T -
Environment Meters
UT320D Mini Contact Type Thermometer
Main Features
1. 1m drop proof
2. 4 times/s sampling rate
3. Maximum/minimum/average
4. Data hold
5. LCD backlight
6. Wide range, high accuracy
7. K/J thermocouple probe selection
8. CE certification
9. Difference measurement: T1~T2
10. Auto power off
11. Low battery indication
SKU: n/a -
Wire & Cable Testers
MS6812 Cable Tracker
The Cable Tracker is designed to identify and trace wires or cables within a group without damaging the insulation.For telephone line, it can identify some state in the line, and more convenience to install, debug, maintain telephone line.There is a Sender(MS6812-T) and a Receiver(MS6812-R)included in The Cable Tracker
● Sound and Light Instruction
● Cont and Tone LED LightApplications
– Judge Continuity of the Cables or Wires
– Track the Cables or Wires, and Diagnose the Break Point
– Receive the Tone Signal on the Cables or Wires(Telephone Line)
– Identify the State in the Working Telephone Line(Clear, Ringing, Busy)
– Send a Single Solid or a Dual Alternating Tone to the Target Cables or WiresSKU: n/a
Related products
-
Rework & Soldering Station
YH 852 (BRUSHLESS FAN) Rework Station
Machine parameter Rated voltage AC 220V±10% 50Hz Machine power 700W±10％（MAX） working environment 0～40℃ relative humidity ＜80％ Storage temperature －20～80℃ relative humidity ＜80％ Machine size 25.5*18.8*12.5cm weight 3.55KG Part of performance parameters Hot air gun Soldering iron Working voltage AC 220V±10% 50Hz AC 26V±10% 50Hz Output power 650W 60W temperature range 100℃～500℃ 200℃～500℃ Mode of airflow brushless fan — airflow 120L/min(max) — Temperature stability ±15℃ （static） ±10℃ （static） Display two LED (red/green) — heater Heating core ceramics heater common heater Tips to ground impedance — ＜2Ω Tips voltage to ground — ＜2mV SKU: n/a -
Rework & Soldering Station
YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
SKU: n/a -
Rework & Soldering Station
YH 8508D Hot Air Rework Station
- 1. The outer enclosure of the main machine is made of a superior iron alloy, which is immune to high temperature damage and is durable.
- 2.Unique material resistant to temperature is adopted for the handle enclosure; striking appearance, wieldy and resistant to temperature.
- 3.The hot air gun’s heating element employs brand new columned heating core developed with a ceramic process, having strong stability, resistance to impact and dropping, and extraordinarily vibration-mitigation ability.
- 4.The outlet steel cylinder of the handle is made of stainless steel with better thermal conductivity, resistant to rust and corrosion and strong resistance to oxidation.
- 5.Spiral wind design with strong airflow through a high quality diaphragm pump. Large air pressure, soft force and uniform face area. Apart from normal desoldering, it is particularly suitable for desoldering of SMD elements with small surface areas and high accuracy.
- 6.An LED shows the current operating temperature of the hot air gun; precise temperature control;
- 7.User-friendly design; hot air gun can be used with the manual/automatic function; can be set depending on the use environment; when the hot air gun is frequently used, choose the manual mode to save time for repetitive temperature rise, easy and convenient, improves work efficiency.
SKU: n/a -
Rework & Soldering Station
YH 939D+ SOLDERING STATION
PARAMETROSMODEL 939D+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a
There are no reviews yet.