-4%

MC IR10 PRO ELECTRIC GLUE REMOVER


3,840 4,000

Compare

MC IR10 PRO ELECTRIC GLUE REMOVER

Category:

Brand

China Brand

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “MC IR10 PRO ELECTRIC GLUE REMOVER”

There are no reviews yet.

  • JM T2-12 TEWZER

    0 out of 5
    (0)
    SKU: n/a
  • SVC 5000VA

    0 out of 5
    (0)

    Input=120V 270
    Output=220
    Under and Over Volt Protection
    Surge Protection
    Over Load and Heat Protection
    Copper Wind with LCD Display

    SKU: n/a
  • UT362 Anemometer

    0 out of 5
    (0)

    1. Data hold, LCD backlight

    2. ℃/℉ selectable
    3. Auto power off (cancelable)
    4. 2044 sets data storage
    5. Auto record function with 0 .5~255s interval
    6. Wearproof fan shaft for improved accuracy and reliability
    7. Wind speed modes: MAX, MIN, Real-time
    8. Wind count modes: MAX, 2/3 MAX, MIN, AVG, real-time
    9. 7 selectable units: m/s, km/h, ft/min, MPH, KNOTS, CFM, CMM
    SKU: n/a
  • Insulation Resistance Testers UT511

    0 out of 5
    (0)

    UT510 series is a kind of intelligent insulation tester. The device circuit design takes microcomputer technology design as the core and combines the large scale integrated circuit with digit circuit. It is equipped with strong measuring software and data processing software. It is applied to the parameter measurement of insulation resistance, voltage and low resistance. It has stable performance and simple operation. It is applicable to on-site measurement and repair of the electrical equipment and charging line. It is the ideal tool of maintaining electrical equipment. It is also used for smelting, communication, manufacture, fossil oil, national defense, electricity, chemical industry and circuit.

    SKU: n/a
  • ET 8102 DMM

    0 out of 5
    (0)

    Specifications:
    Model:ET8102
    Display:5999 Counts
    Color:Black
    DC Voltage:6V/60V/600V±(0.5%+3),1000V±(0.8%+10)
    AC Voltage:6V/60V/600V±(0.8%+3),750V±(1.2%+10)
    DC Current:600uA/6000uA/60mA/600mA±(1.2%+10),6A/10A±(2.0%+30)
    AC Current:600uA/6000uA/60mA/600mA±(1.2%+10),6A/10A±(2.0%+30)
    Resistance:600Ω±(0.8%+5),6KΩ/60KΩ/600KΩ/6MΩ±(0.8%+3),40MΩ±(2.5%+3)
    Capacitance:60nF/600nF/6μF/60μF/600μF±(3.5%+20),6mF/30mF±(5.0%+3)
    Frequency:10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz±(0.1%+3)
    Temperature:-20℃~1000℃,±(1.0%+5)<400℃,±(1.5%+15)≥400℃
    0℉~1832℉,±(0.75%+5)<750℉,±(1.5%+15)≥750℃
    NCV test:Yes
    Zero line/fire wire:Yes
    Duty cycle:Yes
    Diode test:Yes
    Continuity testing:Yes
    Backlight:Yes
    Date hold:Yes
    True RMS:Yes
    Max/Min value measurement:Yes
    Flashlight:Yes
    Auto power off:Yes
    Low battery indication:Yes
    Over range indication:Yes
    Power:2 x 1.5V AAA Battery (not included)
    Product Size:142 x 68 x 32 mm
    Product Net Weight:187g

    Package Information:
    Package Size:16.5 x 10 x 5cm / 6.5 x 3.9 x 2in
    Package Weight:295g / 10.4 oz

    Package list:
    1 x Digital Multimeter
    2 x Test Leads Pens
    1 x User Manual
    • 1.Multifunction:Can measure AC/DC voltage,AC/DC current,resistance,capacitance,
    • 2.Portable design:Small and can be put into pocket,easy to carry.
    • 3.Wide range of applications:It’s a perfect tool for the laboratory,factory and home.
    • 4.Easy to use & clear to read:With large LCD backlight display and flashlight function,convenient to read data in dark.
    • frequency,duty cycle,temperature,NCV,diode,continuity,zero line/fire wire.

    SKU: n/a
  • LKZ-720 Wires and pipe locator

    0 out of 5
    (0)

    Features:

    • the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
    • phase detection mode,
    • receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
    • a LED bright torch,
    • headphone socket in receiver,
    • screens backlight for work in dark,
    • transmission battery status and settings of the transmitter to the receiver
    • operation in wide range of rated voltage, up to 500V RMS,
    •  measurement of voltage at the object to 500 Vrms,
    • three levels of transmitter amplification,
    • automatic or manual selection of transmitter operation modes,
    • five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
    • software upgrade via USB,
    • additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
    SKU: n/a