- Location damaged power cables.
- Fault location copper telecom cables.
- Coaxial cable fault location.
- Fault location wiring infrastructure.
- Detection of breaks, short circuits, damage caused by dampness and other changes in impedance of the cable.
- Graphic depiction of damage the cable with automatic indication the distance to fault on the screen.
TDR-410 Cable Fault Locator
Out of stock
-
Features:
- automatic or manual mode:
- the automatic fault location (AFL),
- mode with manual range selection and sensitivity,
- single measurement triggered manually or scanning continuous,
- 11 available ranges from 7 m to 4000 m selected in manual mode or matched automatically,
- maximum length of cable up to 4000 m one end of the cable,
- “Dead zone” measure limited to 0.5 m,
- 2.5 “LCD screen with backlight,
- scan automatically or manually trigger,
- sensitivity set manually or automatically adjusted,
- adjustable impedance matching,
- propagation coefficient adjustment 1% to 99%,
- waterproof and resistant to mechanical housing.
- small size and weight.
- economical power system – 30 hours of continuously scan on one battery set..
Accessories:
- 0,6 m double-wire lead: WAPRZ0X6DZBB
- red crocodile clip: WAKRORE20K02
- Krokodylek czarny: WAKROBL20K01
- cover M-2: WAFUTM2
- automatic or manual mode:
₨0
Out of stock
CompareDechnical data:
- Ranges Meters: 7, 15, 30, 60, 120, 250, 500, 1km, 2km, 3km, 4km
- Ranges Feet: 20, 45, 90, 180, 360, 750, 1500, 3000, 6000, 10000, 14000.
- Range Selection: Manual range control / Auto range.
- Accuracy: 1% of selected range*.
- Resolution: Approx 1% of range.
- Minimum cable lenght: 4m (14ft).
- Sensitivity: Min 3 pixel return at 4km on 0.6mm Ø, PE, TP.
- Velocity Factor: Adjustable from 1% to 99%.
- Output Pulse: 5 volts peak to peak into open circuit.
- Output Impedance: Selectable 25, 50, 75 & 100 Ω.
- Output Pulse: Width 3 ns to 3 µs, Automatic with range.
- Scan Rate: 2 scans/second or scan held, pre set for each range scale.
- Tone Generator: 810 – 1100Hz.
- Battery Life: 30 hours continuous scanning.
- Power Supply: 6 volts 4 x 1.5 AA Alkaline cells, on-screen low voltage indicator.
- Power Down Selectable: 1, 2, 3, 5 minutes or disabled.
- Back Lit Display: 128 x 64 pixel.
- Voltage Protection: 250 volts AC.
- Operating Temp: -10º / 50ºC.
- Storage Temp: -20º +70° C.
- Dimensions: 165 x 90 x 37 mm (6.5 x 3.5 x 1.5 ins).
- Weight: 350 g (12oz).
- Safety: IEC 61010-1, EN 60950.
- EMC: BS/EN 61326-1.
- Water/Dust Proof: IP54
Based on 0 reviews
Be the first to review “TDR-410 Cable Fault Locator”
-
LCR Meter
UT601 Inductance Capacitance Meters
UT600 series RCL meter is a kind of 3.5-bithandheld digital meter with stable performance, safety, reliability, highaccuracy and manual range. It can be used to measure the magnification times β of audion, diode forward voltage drop and circuit continuity. UT601has wide capacitance measurement range from 0.1pF~20mF and highaccuracy. UT602 can hold data. UT 600 series is applicable to testingresistance, capacitance and inductance of electronic laboratory, productionline, maintenance point and teaching. It is the ideal tool of maintaining formany users
SKU: n/a -
Clamp Meters
CLAMP METER AC DT3266
DT3266L AC/DC Mini Pocket Handheld Digital Clamp Meter Voltage Current Resistance Tester Multimeter
Features :
- 3 1/2 digit LCD screen, the maximum display value is 1999.
- A multi-purpose clamp meter can measure AC/DC voltage and resistance, etc.
- Low voltage indication and overload protection.
- Diode and continuity measurement.
- High resolution of 1mA minimum force.
- Small and portable to carry and use.
- Data retention for easier reading.
Specifications :
- Color : Black + Yellow
- Material : Plastic
- DC Voltage : 600V ±(0.8%+3dgt)
- AC Voltage : 750V ±(1.2% +5dgt)
- AC Current : 20A-200A-400A ±(2%+5dgt)
- Resistance : 2K-200K-2MΩ ±(1.0%+3dgt)
- Power Supply : 2 x AAA 1.5V Batteries (Not included)
- Maximum Display : 1999
- Jaw Diameter : 30.8mm
- Display Size : 35 x 17mm
- Item Size : 17.3 x 5.2 x 2.5cm / 6.8 x 2 x 0.98in
- Item Weight : 120g / 4.24oz
- Package Size : 17.8 x 10 x 3cm / 7 x 3.94 x 1.18in (L x W x H)
- Package Weight : 187g / 6.59in
- GW:0.2KG
Note :
This meter can’t measure DC current.
Package includes :
- 1 x Clamp Meter
- 1 x Test Lead
Best online shopping website for Portable Handheld Digital Clamp Meter DT3266L AC DC Multimeter Voltage Current Resistance Tester at cheap price in Lahore, Islamabad, Karachi, Faislabad, Multan, Quetta, Sukkur, Peshawar, Rawalpindi, and all over Pakistan
SKU: n/a -
Oscilloscopes
UPO2102CS Ultra Phosphor Oscilloscope
Features and Benefits:
1、Sample Rate up to 1GS/s;
2、Channels 2/;
3、Bandwidth 100MHz,;
4、Memory Depth 32Mpts(Standard);
5、Waveform Capture Rate up to 30,000wfms/s;
6、With 256 level intensity grading display;
7、Up to 65,000 frames for Waveform Record ,Replay;
8、Support serial bus trigger and decoding;
9、8 inches, TFT LCD,WVGA(800*480);
10、Interface:USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.SKU: UT21P02CSO -
Watt Meter
UT71E Intelligent Digital Multimeters
1. 40,000 counts, and basic DCV accuracy of 0.025%
2. Can set the interval for auto data recording
3. MAX/MIN/REL measurement mode
4. Peak hold
5. Analogue bar graph
6. Measure AC and DC in the same stall (AC+DC)
7. 4-20mA loop test
8. 45Hz~100kHz frequency response measurement
9. Double backlight
10. Misplug alarm
11. Auto and manual ranges selectable
12. USB interface available
13. Bluetooth connection with a cellphone for data monitoring
14.Power measurement mode
15. Temperature measurement mode, equipped with K-type point contact temperature probe
16. Complies with CE (European Union) and UL (United States) directives
SKU: n/a
There are no reviews yet.