- Location damaged power cables.
- Fault location copper telecom cables.
- Coaxial cable fault location.
- Fault location wiring infrastructure.
- Detection of breaks, short circuits, damage caused by dampness and other changes in impedance of the cable.
- Graphic depiction of damage the cable with automatic indication the distance to fault on the screen.
Wire & Cable Testers
TDR-410 Cable Fault Locator
Availability:
Out of stock
-
Features:
- automatic or manual mode:
- the automatic fault location (AFL),
- mode with manual range selection and sensitivity,
- single measurement triggered manually or scanning continuous,
- 11 available ranges from 7 m to 4000 m selected in manual mode or matched automatically,
- maximum length of cable up to 4000 m one end of the cable,
- “Dead zone” measure limited to 0.5 m,
- 2.5 “LCD screen with backlight,
- scan automatically or manually trigger,
- sensitivity set manually or automatically adjusted,
- adjustable impedance matching,
- propagation coefficient adjustment 1% to 99%,
- waterproof and resistant to mechanical housing.
- small size and weight.
- economical power system – 30 hours of continuously scan on one battery set..
Accessories:
- 0,6 m double-wire lead: WAPRZ0X6DZBB
- red crocodile clip: WAKRORE20K02
- Krokodylek czarny: WAKROBL20K01
- cover M-2: WAFUTM2
- automatic or manual mode:
₨0
Out of stock
CompareDechnical data:
- Ranges Meters: 7, 15, 30, 60, 120, 250, 500, 1km, 2km, 3km, 4km
- Ranges Feet: 20, 45, 90, 180, 360, 750, 1500, 3000, 6000, 10000, 14000.
- Range Selection: Manual range control / Auto range.
- Accuracy: 1% of selected range*.
- Resolution: Approx 1% of range.
- Minimum cable lenght: 4m (14ft).
- Sensitivity: Min 3 pixel return at 4km on 0.6mm Ø, PE, TP.
- Velocity Factor: Adjustable from 1% to 99%.
- Output Pulse: 5 volts peak to peak into open circuit.
- Output Impedance: Selectable 25, 50, 75 & 100 Ω.
- Output Pulse: Width 3 ns to 3 µs, Automatic with range.
- Scan Rate: 2 scans/second or scan held, pre set for each range scale.
- Tone Generator: 810 – 1100Hz.
- Battery Life: 30 hours continuous scanning.
- Power Supply: 6 volts 4 x 1.5 AA Alkaline cells, on-screen low voltage indicator.
- Power Down Selectable: 1, 2, 3, 5 minutes or disabled.
- Back Lit Display: 128 x 64 pixel.
- Voltage Protection: 250 volts AC.
- Operating Temp: -10º / 50ºC.
- Storage Temp: -20º +70° C.
- Dimensions: 165 x 90 x 37 mm (6.5 x 3.5 x 1.5 ins).
- Weight: 350 g (12oz).
- Safety: IEC 61010-1, EN 60950.
- EMC: BS/EN 61326-1.
- Water/Dust Proof: IP54
Based on 0 reviews
Be the first to review “TDR-410 Cable Fault Locator”
-
Rework & Soldering Station
YH 8786D HEAT GUN SOLDERING IRON WELDING STATION
Product Details
- [ 2 in 1 Dual System with Advanced Designs ]-This station combines soldering station and hot air work station for versatile uses.Both the soldering and hot air station have teacher stabilization function to keep iron and hot air gun at the set nature steadily.
- [Intelligent Temperature Control and Advanced Functions & Safety Features ] -With the high-end precision PID program,the station can monitor and correct the actual temperatures at high speed with fast nature composition to provide the accuracy that you need .Exclusive in-holder standby function to help cool the hot air gun when it’s idle,preserving hot air gun in good condition.Equipped with premium Hot Air Gun Fail-safe function to make your work safer and prevent the risk of fire hazards.
- [Digital Display and Anti-static design]-Digital display can show the accurate nature in real time, which makes your selling work easy.Special anti-static grounding design,whatich can prevent companions from being damaged by static electricity.
- [Proprietary Hot Air Technologies and Soldering Performance ]Our exclusive cylindrical hot air heating element heats up quickly. Hot Air template is adjustable from 100-480 ℃/212-896 °F,simulated air volume adjustable from 20 ~ 80.75W Soldering Performance ,the template adjustable from 20/392-896 °F with PID template stabilization powered by dual-core microprocessor.
SKU: n/a -
Clamp Meters
UT219E ACA Professional Clamp Meters
Features
1. 2m drop proof, IP54, CAT IV 600V
2. Large 6000-digit LCD backlight (auto) display
3. True RMS
4. LoZ voltage test, for ghost voltage measurement
5. MAX/MIN/REL testing mode, data hold, excluding the test lead interference of resistance measurement
SKU: n/a -
Digital Multi Meter
The Sanwa CD800a is a basic, portable, 4000 count digital multimeter
- 4000 counts
- 0.7% Best Accuracy
- Sharp contrast LCD with character 17.5mm high is used
- Solid & protective body cover that can also be used as a tilt stand
- Frequency, capacitance, and duty cycle measurement function
- Continuity test with buzzer
Includes meter, instruction manual and test leads.
SKU: n/a -
Clamp Meters
CLAMP METER AC BM 5266
Features: 1. 1999 Counts and All-In-One: It can display 1999 counts and measure ac/dc voltage, ac current, resistance, capacitance, phase, diode and continuity tests. 2. Clear to Read: With large LCD display and data hold function, easy to read and record data. 3. Wide Application Range: It is a perfect tool for laboratory, factory, home and other fields. 4. Easy to Read: With large LCD display and data hold function, easy to read and record data. 5. More advantages: data retention, low battery indication, auto power off and auto negative indication. Description: 1. This BM5266 is a portable digital clamp meter, high reliability, high accuracy and portability, a perfect tool for laboratory, factory, home and other fields. 2. Can measure ac/dc voltage, ac current, resistance, capacitance, phase, diode and continuity tests. 3. More advantages such as data retention, low battery indication, auto power off and auto negative indication. Specifications: Model Number: bm5266 Display: 1999 counts Low battery indication: yes Automatic negative indication: yes Continuity test: yes DC voltage: 600v ±(0.5% 5) AC current: 2a/20a/600a ±(1.9% 10) Capacitance: 200uf ±(3.0% 5) Product Size: 195x63x34mm Color: gray and red Data retention: yes Auto power off: yes Diode test: yes Phase test: yes AC voltage: 600v ±(1.2% 5) Resistance: 2000unf/2mψ ±(0.8% 5) Power supply: 9v 6f22 battery (not included) Product weight: 183g package information: Package Size: 20.5x9.5x4cm / 8.1x3.7x1.6in. Package weight: 290g / 10.7oz Package list: 1 x bm5266 digital cuff gauge 2 x test pen cable 1x User Manual
SKU: n/a
There are no reviews yet.