TDR-420 Time Domain Reflectometer/ Cable Fault Locator

Availability:

Out of stock


Product features

  • Possibility damage-free location of impedance changes of tested cables and wires such as:
    • shorted conductor,
    • open conductor / end of cable – useful during the inventory of warehouses and stores,
    • splice,
    • splitter,
    • water ingress,
    • wet splice,
    • bridge tap
    • or other changes.
  • Single measurement mode ONCE,
  • Continuously measurement mode CONT,
  • Tone signal generator TONE,
  • Two cursors to mark two places of damage along with an indication of the distance between them,
  • Built-in HELP function for easier interpretation of the reflectogram,
  • 11 available measuring ranges from 7 m to 6000 m,
  • „dead zone” limited to 0.6 m,
  • Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
  • manually set of sensitivity in 8 steps GAIN,
  • output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
  • Velocity of Propagation set in range from 10% to 99%,
  • tight and durable housing with IP67 ingress protection degree.
  • Small size and weight.

0

Out of stock

Compare

TDR-420 is a hand held Time Domain Reflectometer designed to identify and locate faults in power, telecommunications and teletechnical cables. TDR-420 reflectometer allows to measure the length of the cable and determine the distance to damage or impedance variation in the range of 4 m to 6000 m in conductors with metal wires. The shortest measuring range of 7 meters and a dead zone of 0.6 meters allows to locate damages at a very close distance from the place where the device is connected.

Two cursors allow to determine the place of two damages simultaneously and the distance between them.

Thanks to the color 3,5” TFT display with a resolution of 320 x 240 pixels, the indication of the location of the damage is precise and the results easier to interpret.

Difficult environment conditions during measurement work are frequent problems encountered by electric installers and maintenance services. Thanks to the unique housing TDR-420 ensure a degree of protection on IP67 level, what means dustproof and protection against water penetration during short-term immersion. Therefore, working in very dusty terrain or accidental contact of the device with water will not affect the correct operation of the reflectometer.

 

Technical specification

  • Measurement ranges: 7, 15, 30, 60, 120, 250, 500 m, 1, 2, 3, 6 km / 20, 45, 90, 180, 360, 750, 1500, 3000, 6000, 10000, 20000 ft
  • Accuracy:1% of selected range
  • Resolution: Approx. 1% of selected range
  • Min. Cable length: 4 m / (14 ft)
  • Velocity of propagation VoP: Adjustable from 10 to…99% or 15…148,5 m/µs
  • Output Pulse: 5 Vp-p (open circuit)
  • Output Impedance: 25, 50, 75, 100, 120, 200 Ω
  • Output Impedance: 3 ns…3 µs (depends of range)
  • Scan rate / mode: Up to 3 scans / second (CONT) or single (ONCE)
  • Tone generator: 810 … 1110 Hz
  • Battery Life: Up to 8 hours of continuous scan
  • Power supply: 4 x alkaline batteries 1.5 V type AA or 4 x rechargeable batteries NiMH AA
  • Auto-OFF: 1, 3, 5, 10, 15 minutes or deactivated
  • Display: Color 3,5” LCD TFT, 320 x 240 pixels
  • Voltage protection: 400 V DC / 250 V AC
  • Dimensions: 220 x 98 x 58 mm (8.7 x 3.9 x 2.3 inches)
  • Weight: 487 g
  • Electromagnetic standard compatibility EMC: EN 61326-1
  • Water/ Dust Proof: IP67

Nominal condition of use

  • Operating temperature: -20..+70°C
  • Storage temperature: -30…+80°C at humidity <80%

Brand

SONEL

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “TDR-420 Time Domain Reflectometer/ Cable Fault Locator”

There are no reviews yet.

  • UT33B+ Palm Size Multimeter

    0 out of 5
    (0)

    Main features

    1. Clear LCD display

    2. Equipped with comfortable protective cover, test lead hanging slot

    3. 2m drop proof with precision protection

    4. Auto power off

    5. Auto backlight off

    6. Loud buzzer

    7. Ergonomically designed rotary switch

    SKU: n/a
  • JM-6123 Colorful Ring Hardware Hand Tool Set

    0 out of 5
    (0)

    Features:

    • High strength storage box with the design of collision can effectively protect the tools from external shock.
    • Working angle can be ajusted rapidly by the ratchet handle with high working efficiency.
    SKU: n/a
  • CLAMP METER AC DT3266

    0 out of 5
    (0)

    DT3266L AC/DC Mini Pocket Handheld Digital Clamp Meter Voltage Current Resistance Tester Multimeter

    Features :

    • 3 1/2 digit LCD screen, the maximum display value is 1999.
    • A multi-purpose clamp meter can measure AC/DC voltage and resistance, etc.
    • Low voltage indication and overload protection.
    • Diode and continuity measurement.
    • High resolution of 1mA minimum force.
    • Small and portable to carry and use.
    • Data retention for easier reading.

    Specifications :

    1. Color : Black + Yellow
    2. Material : Plastic
    3. DC Voltage : 600V ±(0.8%+3dgt)
    4. AC Voltage : 750V ±(1.2% +5dgt)
    5. AC Current : 20A-200A-400A ±(2%+5dgt)
    6. Resistance : 2K-200K-2MΩ ±(1.0%+3dgt)
    7. Power Supply : 2 x AAA 1.5V Batteries (Not included)
    8.  Maximum Display : 1999
    9. Jaw Diameter : 30.8mm
    10. Display Size : 35 x 17mm
    11. Item Size : 17.3 x 5.2 x 2.5cm / 6.8 x 2 x 0.98in
    12. Item Weight : 120g / 4.24oz
    13. Package Size : 17.8 x 10 x 3cm / 7 x 3.94 x 1.18in (L x W x H)
    14. Package Weight : 187g / 6.59in
    15. GW:0.2KG

    Note :  

    This meter can’t measure DC current.

    Package includes :

    • 1 x Clamp Meter
    • 1 x Test Lead

    Best online shopping website for Portable Handheld Digital Clamp Meter DT3266L AC DC Multimeter Voltage Current Resistance Tester at cheap price in Lahore, Islamabad, Karachi, Faislabad, Multan, Quetta, Sukkur, Peshawar, Rawalpindi, and all over Pakistan

     

    SKU: n/a
  • UT658B USB Tester

    0 out of 5
    (0)

    UT658 series USB testers are used to inspect USB chargers and portable power source of electronics products. UT658 series can output voltage, current, and power. Users can use these devices to monitor charging status of  any USB powered device.

    SKU: n/a
  • JM OP06 OPENING TOOL

    0 out of 5
    (0)
    Description
    Item Description:
    • Features:
      – Stainless steel material make it more durable.
      – Anti-corrosion with stainless steel forged process.
      – Easier to disassemble the electronic part accessories.
      – Common used in laptops, mobiles and tablets disassembling.
      – Special rolling-wheel design for better use in opening.
      – The end of the tool with anti-slip design make it easier for disassembling.
      – Precision processing technology on the metal part for better protection on the product itself.
    • Brand: JAKEMY
    • Model: JM-OP06
    • Material: Stainless steel
    • Color: Orange & silver
    • Package Weight: 45.0 G / 1.59 Ounces
    • Package Dimensions (L*W*H): 180*80*13 MM / 7.09*3.15*0.51 Inches200
    SKU: n/a