UT658 USB Tester

Availability:

20 in stock


Features

1. 10 sets of data storage

2. High/Low output voltage warning

3. LCD backlight

4. Light weight, portable

1,717

20 in stock

Compare

Features

1. 10 sets of data storage

2. High/Low output voltage warning

3. LCD backlight

4. Light weight, portable

Category:
Weight 0.1 kg
Dimensions 8 × 3 × 1 cm
Specifications Range Remark
Input Voltage Range (V) 3V-9V If higher than 9V, display OL
Voltage Resolution 0.01V
Voltage Monitoring Accuracy ±1%
Current Monitoring Range (A) 0A~3A If higher than 3A, display OL
Current Monitoring Accuracy ±(1%±2) Lower than 500mA:±3,(a% Reading+b    Number)
Current Resolution 0.01A If lower than 50mA, display 0.00
Capacity 0~9999mAH If higher than 9999, display OL
Capacity Data Storage 10 Groups
Display Way LCD Backlight
Warning Higher than 5.3V lower than 4.7V
Buttons
Contamination Level 2
Working Temperature 0℃∽40℃
Storage Temperature -10℃∽50℃
Relative Humidity <75%

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT658 USB Tester”

There are no reviews yet.

  • YH 900H ELEMENT

    0 out of 5
    (0)
    SKU: n/a
  • RF-0.5x New

    0 out of 5
    (0)

    RF-0.5x New

    SKU: n/a
  • TDR-420 Time Domain Reflectometer/ Cable Fault Locator

    0 out of 5
    (0)

    Product features

    • Possibility damage-free location of impedance changes of tested cables and wires such as:
      • shorted conductor,
      • open conductor / end of cable – useful during the inventory of warehouses and stores,
      • splice,
      • splitter,
      • water ingress,
      • wet splice,
      • bridge tap
      • or other changes.
    • Single measurement mode ONCE,
    • Continuously measurement mode CONT,
    • Tone signal generator TONE,
    • Two cursors to mark two places of damage along with an indication of the distance between them,
    • Built-in HELP function for easier interpretation of the reflectogram,
    • 11 available measuring ranges from 7 m to 6000 m,
    • „dead zone” limited to 0.6 m,
    • Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
    • manually set of sensitivity in 8 steps GAIN,
    • output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
    • Velocity of Propagation set in range from 10% to 99%,
    • tight and durable housing with IP67 ingress protection degree.
    • Small size and weight.
    SKU: n/a
  • UT-CS09C Flex Clamp Sensor

    0 out of 5
    (0)

    1. Flex clamp can measure from 1.5A to 3000A current

    2. 1m drop proof
    3. Robust terminal connection
    SKU: n/a
  • TKF-12 Phase Sequence Tester

    0 out of 5
    (0)

    Phase sequence indication (direction of field rotation) in the power network with rated phase-to-phase voltage (120…690 V) AC by LED signalization.
    Operation in the power network with frequency range 10…70 Hz.

    Indication of the voltage presence in the particular phases by neon lamps signalization.
    Power supply from the tested network (continuous operation to 15 minutes for max. voltage).
    Protection against faulty indication of field rotation.

    SKU: n/a